 |
3-pin Panaflo Fan Tail
| Brand: Panaflo |
|
 |
No more will you have to wire or solder your own lead on your Panaflo fan. You can use these on untailed Panaflo fans. Available with 4 pin power supply connector or 3 pin connector. Panaflo fans come untailed or bare wire leaving you high and dry. We had these special Panaflo connectors made that plug right into the outside of the Panaflo's fan motor. Simply plug the...
|

Submit a review
|
$2.50
|
 |
3-pin Tailed Connector
| Brand: FrozenCPU |
|
 |
These are used with fanbus that require tailed fans. If you don't want to cut the 3pin connector of your fans you can use these instead. Also gives a little extention to your fan's plug. Soldered and capped at the ends for no frays! Extra long leads for ease of use.
|

Submit a review
|
$2.00
|
 |
3-pin Tailed Connector 6x
| Brand: FrozenCPU |
|
 |
These are used with fanbus that require tailed fans. If you don't want to cut the 3pin connector of your fans you can use these instead. Also gives a little extention to your fan's plug. Soldered and capped at the ends for no frays! Extra long leads for ease of use.
This version comes with six adapters attached but you can easily seperate them for individual use. P...
|

Submit a review
|
$6.00
|
 |
3-pin to 4-pin Adapter
| Brand: FrozenCPU |
|
 |
They are for converting a 3 pin fan to a 4 pin power connector for two reasons: 1) You are afraid to draw to much power from your motherboard. 2) You ran out of CPU fan headers. Handy adapter to have. Allows for you to bypass the 3 pin connector on your motherboard so you can plug your 3 pin fan directly into the power supply.
|

Submit a review
|
$2.50
|
 |
3-pin to 4-pin Adapter w/ RPM Monitoring
| Brand: FrozenCPU |
|
 |
This 3 to 4 pin adapter will allow you to monitor high speed fans with your motherboard header while being powered right from your power supply.
|

Submit a review
|
$2.50
|
 |
3-pin Y Cable Splitter
| Brand: FrozenCPU |
|
 |
This adapter allows for two 3 pin fans to use one motherboard header. Make sure you are careful about the amount of power you draw from your motherboard.
|

Submit a review
|
$2.50
|
 |
3mm/5mm LED Power Cable
| Brand: FrozenCPU |
|
 |
This cable is designed to power an 3.3v LED with a 4pin power supply connector. Built in resistor for easy LED lighging! Works on all 3.3v LEDs, 3mm or 5mm and is ideal for single LED lighting!
|

Submit a review
|
$3.00
|
 |
3pin Motherboard Header to 4pin Female Power Supply Connector
| Brand: FrozenCPU |
|
 |
This adapter allow you to plug a 4pin fan into a standard 3pin motherboard fan header. You will not get RPM monitoring but your motherboard bios will be able to adjust the fan speed if your bios allow it.
|

Submit a review
|
$2.50
|
 |
4 Pin Floppy Adapter
| Brand: FrozenCPU |
|
 |
The 4 pin floppy adapter is simply a nifty little cable that turns a 4 pin power supply plug into 4 pin mini plug required by floppy drives and as an added bonus it also provides two normal 4 pin connectors.
|

Submit a review
|
$2.50
|
 |
4-pin Molex to 8-pin 12V Power Connector
| Brand: FrozenCPU |
|
 |
This cable converts a molex power input into one 8-pin 12V Power Connector. Very useful if you wish to use a newer mobo with an older PSU.
|

Submit a review
|
$9.99
|
 |
4-pin Panaflo Fan Tail
| Brand: Panaflo |
|
 |
No more will you have to wire or solder your own lead on your Panaflo fan. You can use these on untailed Panaflo fans. Available with 4 pin power supply connector or 3 pin connector. Panaflo fans come untailed or bare wire leaving you high and dry. We had these special Panaflo connectors made that plug right into the outside of the Panaflo's fan motor. Simply plug the...
|

Submit a review
|
$2.50
|
 |
4-pin Pentium 4 to 8-pin 12V Power Cable Adapter - 6"
| Brand: FrozenCPU |
|
 |
The 4-pin Pentium 4 to 8-pin 12V Power Cable Adapter converts the standard 4-pin Pentium 4 connection that is available on most power supplies to the 8-pin 12V connector needed for newer motherboards. The cable is 6 inches long. Comes sleeved black, use sleeving option to chose different colors.
|

Submit a review
|
$5.99
|
 |
4-pin Tailed Connector - Female
| Brand: FrozenCPU |
|
 |
These are used with fanbus that require tailed fans. If you don't want to cut the power supply connector of your fans you can use these instead. Also gives a little extention to your fan's plug. Soldered and capped at the ends for no frays! Extra long leads for ease of use. Uses female connector on end and thinned leads for longevity.
|

Submit a review
|
$2.50
|
 |
4-pin Tailed Connector - Male
| Brand: FrozenCPU |
|
 |
These are used with fanbus that require tailed fans. If you don't want to cut the power supply connector of your fans you can use these instead. Also gives a little extention to your fan's plug. Soldered and capped at the ends for no frays! Uses female connector on end and thinned leads for longevity.
|

Submit a review
|
$2.50
|
 |
4-pin to Dual 15-pin SATA Power Cable w/ Locking Clips (GC6ATAM2)
| Brand: FrozenCPU |
|
 |
This cable powers two SATA devices from one 4-pin power supply connector and features the new plug design with the metal locking clip.
|

Submit a review
|
$2.49
|
 |
50-Pin SCSI Active Terminator
| Brand: FrozenCPU |
|
 |
50 pin terminator is a must for stability. Unless of course you have the last device terminated at the device at the end of the chain.
|

Submit a review
|
$3.50
|
 |
6 Pin PCI-E to 8 Pin PCI-E2 Adapter Cable
| Brand: FrozenCPU |
|
 |
The 6 Pin PCI-E to 8 Pin PCI-E2 Adapter Cable is perfect for those of you that have a video card needing the new 8 pin PCI-E connector. Most new PSU's are missing this connector but with this cable you can adapt the 6pin right over to the 8 pin connector.
|

Submit a review
|
$9.99
|
 |
A.C. Ryan UDrive IDE / SATA to USB 2.0 External Converter
| Brand: AC Ryan |
|
 |
The A.C. Ryan UDrive IDE / SATA to USB 2.0 External Converter is an easy solution for testing hard drives, running optical drives on notebooks, making a cheap portable drive and more! Simply plug the USB cable into your computer and then plug your drive into the converter along with the power cables. Only older computers need drivers - most machines are 100% plug-n-...
|

Submit a review
|
$29.95
|
 |
Aerocool PoweredUSB 12V USB Cable
| Brand: Aerocool |
|
 |
The Aerocool PoweredUSB 12V USB Cable uses your computer's standard powered USB port to provide power and USB data transfer to devices that normally receive their power from a wall power adapter. Scanners, External Drives, USB Hubs, Chargers, and more use plug in power adapters to get 5V or 12V power when they instead could get these direct from your computer's USB p...
|

Submit a review
|
$19.99
|
 |
Aerocool PoweredUSB 5V USB Cable
| Brand: Aerocool |
|
 |
The Aerocool PoweredUSB 5V USB Cable uses your computer's standard powered USB port to provide power and USB data transfer to devices that normally receive their power from a wall power adapter. Scanners, External Drives, USB Hubs, Chargers, and more use plug in power adapters to get 5V or 12V power when they instead could get these direct from your computer's USB po...
|

Submit a review
|
$19.99
|
 |
ATX 2.01 -> 2.03/P4 12V Adapter
| Brand: FrozenCPU |
|
 |
This cable converts your ATX 2.01 Power Supply to 2.03 and adds the Pentium IV motherboard cable.
|

Submit a review
|
$4.00
|
 |
Bitspower X-Station Multi PSU Module - Blue LED (BP-XSU-BL)
| Brand: Bitspower International Co., Ltd. |
|
 |
The Bitspower X-Station Multi PSU Module lets you run up to 4 power supplies simultaneously by connecting them to the connectors on the X-Station and jumping one of the X-Station's connectors with the included ATX Power Supply Jumper. This module is a must for enthusiasts that want to ensure clean power for their video cards by providing them with their own power sup...
|

Submit a review
|
$20.99
|
 |
Bitspower X-Station Multi PSU Module - Green LED (BP-XSU-GR)
| Brand: Bitspower International Co., Ltd. |
|
 |
The Bitspower X-Station Multi PSU Module lets you run up to 4 power supplies simultaneously by connecting them to the connectors on the X-Station and jumping one of the X-Station's connectors with the included ATX Power Supply Jumper. This module is a must for enthusiasts that want to ensure clean power for their video cards by providing them with their own power sup...
|

Submit a review
|
$20.99
|
 |
Bitspower X-Station Multi PSU Module - Orange LED (BP-XSU-OR)
| Brand: Bitspower International Co., Ltd. |
|
 |
The Bitspower X-Station Multi PSU Module lets you run up to 4 power supplies simultaneously by connecting them to the connectors on the X-Station and jumping one of the X-Station's connectors with the included ATX Power Supply Jumper. This module is a must for enthusiasts that want to ensure clean power for their video cards by providing them with their own power sup...
|

Submit a review
|
$20.99
|
 |
Bitspower X-Station Multi PSU Module - Red LED (BP-XSU-RD)
| Brand: Bitspower International Co., Ltd. |
|
 |
The Bitspower X-Station Multi PSU Module lets you run up to 4 power supplies simultaneously by connecting them to the connectors on the X-Station and jumping one of the X-Station's connectors with the included ATX Power Supply Jumper. This module is a must for enthusiasts that want to ensure clean power for their video cards by providing them with their own power sup...
|

Submit a review
|
$20.99
|
 |
Bitspower X-Station Multi PSU Module - UV LED (BP-XSU-UV)
| Brand: Bitspower International Co., Ltd. |
|
 |
The Bitspower X-Station Multi PSU Module lets you run up to 4 power supplies simultaneously by connecting them to the connectors on the X-Station and jumping one of the X-Station's connectors with the included ATX Power Supply Jumper. This module is a must for enthusiasts that want to ensure clean power for their video cards by providing them with their own power sup...
|

Submit a review
|
$20.99
|
 |
Bitspower X-Station Power Extension I - Blue LED (BP-XSP1M-BL)
| Brand: Bitspower International Co., Ltd. |
|
 |
The Bitspower X-Station Power Extension I features four 4 Pin standard power connectors, and a whopping eleven 3 Pin standard power connectors. The 3 Pin connectors provide three different voltages, three at 5 V, four at 7 V and another 4 at 12 V. The unit also lights up two LEDs for a cool look. All of this is powered by one standard 4 Pin connector!
|

Submit a review
|
$24.99
|
 |
Bitspower X-Station Power Extension I - Green LED (BP-XSP1M-GR)
| Brand: Bitspower International Co., Ltd. |
|
 |
The Bitspower X-Station Power Extension I features four 4 Pin standard power connectors, and a whopping eleven 3 Pin standard power connectors. The 3 Pin connectors provide three different voltages, three at 5 V, four at 7 V and another 4 at 12 V. The unit also lights up two LEDs for a cool look. All of this is powered by one standard 4 Pin connector!
|

Submit a review
|
$24.99
|
 |
Bitspower X-Station Power Extension I - Orange LED (BP-XSP1M-OR)
| Brand: Bitspower International Co., Ltd. |
|
 |
The Bitspower X-Station Power Extension I features four 4 Pin standard power connectors, and a whopping eleven 3 Pin standard power connectors. The 3 Pin connectors provide three different voltages, three at 5 V, four at 7 V and another 4 at 12 V. The unit also lights up two LEDs for a cool look. All of this is powered by one standard 4 Pin connector!
|

Submit a review
|
$24.99
|
 |
Bitspower X-Station Power Extension I - Red LED (BP-XSP1M-RD)
| Brand: Bitspower International Co., Ltd. |
|
 |
The Bitspower X-Station Power Extension I features four 4 Pin standard power connectors, and a whopping eleven 3 Pin standard power connectors. The 3 Pin connectors provide three different voltages, three at 5 V, four at 7 V and another 4 at 12 V. The unit also lights up two LEDs for a cool look. All of this is powered by one standard 4 Pin connector!
|

Submit a review
|
$24.99
|