Phone: 1.877.2.GET.COOL (1.877.243.8266)   Store & Phone Hours: M-F 10-6, Sat 11-4 Est. 1999 Bookmark and Share
  Advanced Search



Follow FrozenCPU on Twitter
Click to verify BBB accreditation and to see a BBB report.




End Point E-commerce Development

Home    Liquid Cooling    Fittings-Accessories
Fittings-Accessories
We have the liquid cooling and water cooling fiitings and accessories you need to install your water cooling system. We carry liquid cooling fittings in 1/4" ID, 3/8" ID and 1/2" ID sizes and we also have water cooling compression fittings.

Looking for tubing grommets, radiator outlet fittings, water cooling elbows, T fittings, Y fittings or adjustable clamps for your liquid cooled system? Frozencpu has the largest selection of flowmeters and inline water temperature probes, tubing reducers, drain and fill ports, and connectors available.


FrozenCPU Lighted Crystal LED Plug - UV - (4 Pin)
FrozenCPU Lighted Crystal LED Plug - UV - (4 Pin) The FrozenCPU Lighted Crystal LED Plug - UV is a G1/4" threaded acrylic plug. This plug can be used for extra reservoir ports on multiple products. Spruce up your water cooling with some color!
45 In Stock, Ships Today Till 6pm EST
$5.99 		Bitspower Chrome G1/4" Barb Fitting - 1/2" ID
Bitspower Chrome G1/4" Barb Fitting - 1/2" ID The FrozenCPU G1/4" Barb Fitting fits standard G1/4" ports and secures tubing with its flanged barb. The barb fitting can be used in conjunction with one of our reusable clamps.
298 In Stock, Ships Today Till 6pm EST
$2.79 		Innovatek FlowMeter PRO Rev. 3.6 (500870-02)
Innovatek FlowMeter PRO Rev. 3.6 (500870-02) The FlowMeter PRO Revision 3.6 is a flow measuring turbine that can be attached directly to your mother board! It will measure the flow of in your watercooling system and indicate the flow value in revolutions per minute so that it can be read directly by your motherboard's BIOS. The integrated blue LED also allows a visual indication of the flow ...
5 In Stock, Ships Today Till 6pm EST
$52.99 		Bitspower Ultimate G 1/4 Thread 1/4" ID x 3/8" OD Compression Fitting
Bitspower Ultimate G 1/4 Thread 1/4" ID x 3/8" OD Compression Fitting This item is a compression fitting for use with water cooling products. The 1/4" British standard thread with rubber o-ring allows it to screw securely into water cooling components with a tight leak proof seal. The screw connection is designed for use with PVC tubing with an inside diameter of 1/4" and an outside diameter of 3/8". This fitting...
188 In Stock, Ships Today Till 6pm EST
$4.99

Fittings-Accessories Categories
G1/4" Fitting O-Rings Rotary Connectors 
G1/4" Plugs G1/4" Compression Fittings 
G1/4" Connectors G3/8" Connectors 
Drain / Fill Ports Flow / Temp. Meters 
Grommets Reducers 
Thread Adapters PCI Pass Thru 
SLI Connectors Y / F Compression Splitter 
Y / F Splitter Elbow Connectors 
T Connectors Quad Connectors 

 
   Switch to gallery view
   Results 1-30 of 383
Sort By:
 
of 13 Next

1/2" I.D. PrimoFlex Tubing Grommet - Rubber (9307k56) 1/2" I.D. PrimoFlex Tubing Grommet - Rubber (9307k56)
Brand: FrozenCPU  

These Military Specification Buna-N grommets are very useful for protecting your tubing as it passes through your case side or other metal surfaces. 3/4" I.D. 1-13/16" O.D.

Submit a review 		$3.00
1/2" I.D. Tubing Grommet - Rubber (9307k53) 1/2" I.D. Tubing Grommet - Rubber (9307k53)
Brand: FrozenCPU  

These Military Specification Buna-N grommets are very useful for protecting your tubing as it passes through your case side or other metal surfaces. 5/8" I.D. 1-1/8" O.D.

Submit a review 		$1.50
1/2" ID to 3/8" ID Leakproof Reducer - BLACK 1/2" ID to 3/8" ID Leakproof Reducer - BLACK
Brand: FrozenCPU  

This reducer is designed to reduce 1/2" ID tubing to 3/8" ID tubing. Ideal for coupling 3/8" ID water blocks to a 1/2" ID system.

Submit a review 		$1.50
1/2" ID to 3/8" ID UV Reactive Leakproof Reducer 1/2" ID to 3/8" ID UV Reactive Leakproof Reducer
Brand: FrozenCPU  

These reducers are designed to reduce 1/2" ID tubing to 3/8" ID tubing. Ideal for using various Swiftech, Danger Den and other water blocks in a 1/2" ID system.

Submit a review 		$1.50
1/2" ID UV Reactive Leakproof Coupler 1/2" ID UV Reactive Leakproof Coupler
Brand: FrozenCPU  

These couplers are designed to join two seperated tubes for 1/2" ID tubing. Ideal for Swiftech, Danger Den and various 1/2" ID tubing systems.


Submit a review 		$1.50
1/2" ID UV Reactive Leakproof Elbow 1/2" ID UV Reactive Leakproof Elbow
Brand: FrozenCPU  

These elbows are designed to join two seperated tubes at a 90º angle for 1/2" ID tubing. Ideal for Swiftech, Danger Den and various 1/2" ID tubing systems.


Submit a review 		$2.75
1/2" ID UV Reactive Leakproof T Fitting 1/2" ID UV Reactive Leakproof T Fitting
Brand: FrozenCPU  

These T fittings are designed specifically for 1/2" ID tubing. Ideal for Swiftech, Danger Den and various 1/2" ID tubing systems.


Submit a review 		$2.75
1/2" ID UV Reactive Leakproof Y Fitting 1/2" ID UV Reactive Leakproof Y Fitting
Brand: FrozenCPU  

These Y fittings are designed specifically for 1/2" ID tubing. Ideal for Swiftech, Danger Den and various 1/2" ID tubing systems.


Submit a review 		$2.75
1/4" I.D. Tubing Grommet - Rubber (9307k48) 1/4" I.D. Tubing Grommet - Rubber (9307k48)
Brand: FrozenCPU  

These Military Specification Buna-N grommets are very useful for protecting your tubing as it passes through your case side or other metal surfaces. 3/8" I.D. 3/4" O.D.

Submit a review 		$1.00
1/4" ID Radiator Outlet Fitting 1/4" ID Radiator Outlet Fitting

 This is an 1/4" ID outlet fitting with 1/4" ID NPT threading, designed specifically for use with the DangerDen Black Ice radiator line, now with customizable fittings! Note: Quantity 1 is one fitting (two shown in picture for descriptive purposes only)

Submit a review 		$1.50
1/4" ID UV Reactive Leakproof T Fitting 1/4" ID UV Reactive Leakproof T Fitting
Brand: FrozenCPU  

These T fittings are designed specifically for 1/4" ID tubing. Ideal for Koolance and various 1/4" ID tubing systems.


Submit a review 		$2.25
3/8" I.D. Tubing Grommet - Rubber (9307k26) 3/8" I.D. Tubing Grommet - Rubber (9307k26)
Brand: FrozenCPU  

These Military Specification Buna-N grommets are very useful for protecting your tubing as it passes through your case side or other metal surfaces. 1/2" I.D. 1-1/16" O.D.

Submit a review 		$1.50
3/8" ID to 1/4" ID Leakproof Reducer - BLACK 3/8" ID to 1/4" ID Leakproof Reducer - BLACK
Brand: FrozenCPU  

This reducer is designed to reduce 3/8" ID tubing to 1/4" ID tubing. Ideal for using Koolance or Innovatek water blocks in a 3/8" ID system.

Submit a review 		$1.50
3/8" ID UV Reactive Leakproof Coupler 3/8" ID UV Reactive Leakproof Coupler
Brand: FrozenCPU  

These couplers are designed to join two seperated tubes for 3/8" ID tubing. Ideal for Swiftech, Danger Den and various 3/8" ID tubing systems.


Read reviews
Submit a review 		$1.50
3/8" ID UV Reactive Leakproof Elbow 3/8" ID UV Reactive Leakproof Elbow
Brand: FrozenCPU  

These elbows are designed to join two seperated tubes at a 90º angle for 3/8" ID tubing. Ideal for Swiftech, Danger Den and various 3/8" ID tubing systems.


Read reviews
Submit a review 		$2.50
3/8" ID UV Reactive Leakproof T Fitting 3/8" ID UV Reactive Leakproof T Fitting
Brand: FrozenCPU  

These T fittings are designed specifically for 3/8" ID tubing. Ideal for Swiftech, Danger Den and various 3/8" ID tubing systems.


Submit a review 		$2.50
3/8" UV Reactive Leakproof Y Fitting 3/8" UV Reactive Leakproof Y Fitting
Brand: FrozenCPU  

These Y fittings are designed specifically for 3/8" ID tubing. Ideal for Swiftech, Danger Den and various 3/8" ID tubing systems.


Submit a review 		$2.50
5/8" ID to 1/2" ID Leakproof Reducer - BLACK 5/8" ID to 1/2" ID Leakproof Reducer - BLACK
Brand: FrozenCPU  

This reducer is designed to reduce 5/8" ID tubing to 1/2" ID tubing. Ideal for using 5/8" ID native pumps with a 1/2" ID system.

Submit a review 		$1.50
5/8" ID to 1/2" ID UV Reactive Leakproof Reducer 5/8" ID to 1/2" ID UV Reactive Leakproof Reducer
Brand: FrozenCPU  

This reducer is designed to reduce 5/8" ID tubing to 1/2" ID tubing. Ideal for using 5/8" ID native pumps with a 1/2" ID system.

Submit a review 		$1.50
Bitspower Black Sparkle G1/4" Barb Fitting - 1/2" ID Bitspower Black Sparkle G1/4" Barb Fitting - 1/2" ID
Brand: Bitspower International Co., Ltd.  

This G1/4" Barb Fitting fits standard G1/4" ports and secures tubing with its flanged barb. The barb fitting can be used in conjunction with one of our reusable clamps.

Read reviews
Submit a review 		$3.49
Bitspower Black Sparkle G1/4" Barb Fitting - 3/8" ID Bitspower Black Sparkle G1/4" Barb Fitting - 3/8" ID
Brand: Bitspower International Co., Ltd.  

This G1/4" Barb Fitting fits standard G1/4" ports and secures tubing with its flanged barb. The barb fitting can be used in conjunction with one of our reusable clamps.

Submit a review 		$3.49
Bitspower Chrome G1/4" Barb Fitting - 1/2" ID Bitspower Chrome G1/4" Barb Fitting - 1/2" ID
Brand: Bitspower International Co., Ltd.  

The FrozenCPU G1/4" Barb Fitting fits standard G1/4" ports and secures tubing with its flanged barb. The barb fitting can be used in conjunction with one of our reusable clamps.

Submit a review 		$2.79
Bitspower Chrome G1/4" Barb Fitting - 3/8" ID Bitspower Chrome G1/4" Barb Fitting - 3/8" ID
Brand: Bitspower International Co., Ltd.  

The FrozenCPU G1/4" Barb Fitting fits standard G1/4" ports and secures tubing with its flanged barb. The barb fitting can be used in conjunction with one of our reusable clamps.

Submit a review 		$2.79
Bitspower Chrome G3/8" Barb Fitting - 1/2" ID Bitspower Chrome G3/8" Barb Fitting - 1/2" ID
Brand: Bitspower International Co., Ltd.  

The Bitspower Chrome G3/8" Barb Fitting is a standard liquid cooling barb designed to fit G3/8" threaded ports.

Submit a review 		$4.50
Bitspower Chrome G3/8" Barb Fitting - 3/8" ID Bitspower Chrome G3/8" Barb Fitting - 3/8" ID
Brand: Bitspower International Co., Ltd.  

The Bitspower Chrome G3/8" Barb Fitting is a standard liquid cooling barb designed to fit G3/8" threaded ports.

Read reviews
Submit a review 		$4.50
Bitspower Chrome Stubby G1/4" Barb Fitting - 1/2" ID Bitspower Chrome Stubby G1/4" Barb Fitting - 1/2" ID
Brand: Bitspower International Co., Ltd.  

Bitspower Chrome Stubby G1/4" Barb Fitting is best suited for SLI style limited space projects. This fitting fits G1/4" threaded ports.

Submit a review 		$2.79
Bitspower Chrome Stubby G1/4" Barb Fitting - 3/8" ID Bitspower Chrome Stubby G1/4" Barb Fitting - 3/8" ID
Brand: Bitspower International Co., Ltd.  

Bitspower Chrome Stubby G1/4" Barb Fitting is best suited for SLI style limited space projects. This fitting fits G1/4" threaded ports.

Submit a review 		$2.79
Bitspower Crystal Quad Block - 360 Degree Bitspower Crystal Quad Block - 360 Degree
Brand: Bitspower International Co., Ltd.  

The FrozenCPU G1/4" Crystal Quad Block is a machined acrylic water cooling accessory useful to make tight corners and internal case clean up a breeze. The block can be used with any G1/4" threaded fitting(s).

Submit a review 		$4.95
Bitspower Dual G1/4" Male / Male Fitting Bitspower Dual G1/4" Male / Male Fitting
Brand: Bitspower International Co., Ltd.  

The FrozenCPU Dual G1/4" Male / Male Fitting can connect two female threaded components - for example: two reservoirs.

Submit a review 		$3.99
Bitspower Dual G1/4" Silver Shining 5-Way Rotary Snake-Style Adapter (BP-SR5D) Bitspower Dual G1/4" Silver Shining 5-Way Rotary Snake-Style Adapter (BP-SR5D)
Brand: Bitspower International Co., Ltd.  

The Bitspower Dual G1/4" Silver Shining 5-Way Rotary Snake-Style Adapter is perfect for tight cases and liquid cooling. This female to female G1/4 thread adapter can make life simple when trying to make a quick U-turn or sneaking around that chassis frame that always seems to be right in the way. With the 360° rotary swivel you no longer have to account for tubing k...

Submit a review 		$22.95
 
of 13 Next