 |
FrozenCPU Quick Disconnect Male Spade Connector - 2.8mm - 100 Pack
| Brand: FrozenCPU |
|
 |
FrozenCPU Quick Disconnect Male Spade Connector - 2.8 are a great way to make your own quick disconnect cables.
These are sold as a 100 pack.
|
Submit a review
|
$24.99
|
 |
FrozenCPU Quick Disconnect Male Spade Connector - 4.8mm
| Brand: FrozenCPU |
|
|
FrozenCPU Quick Disconnect Male Spade Connector - 4.8 are a great way to make your own quick disconnect cables.
These are sold as individual connectors.
|
Submit a review
|
$0.39
|
|
FrozenCPU Quick Disconnect Male Spade Connector - 4.8mm - 10 Pack
| Brand: FrozenCPU |
|
|
FrozenCPU Quick Disconnect Male Spade Connector - 4.8 are a great way to make your own quick disconnect cables.
These are sold as a 10 pack.
|
Submit a review
|
$3.75
|
|
FrozenCPU Quick Disconnect Male Spade Connector - 4.8mm - 100 Pack
| Brand: FrozenCPU |
|
|
FrozenCPU Quick Disconnect Male Spade Connector - 4.8 are a great way to make your own quick disconnect cables.
These are sold as a 100 pack.
|
Submit a review
|
$24.99
|
 |
FrozenCPU Quick Disconnect PVC Insulating Spade Connector Cover - (6.3mm / 1/4")
| Brand: FrozenCPU |
|
|
FrozenCPU Quick Disconnect PVC Insulating Spade Connector Cover - 6.3 are a great way to shield your quick disconnect cables, spade conenctors.
These are sold as individual connector covers.
|
Submit a review
|
$0.25
|
 |
FrozenCPU Quick Disconnect PVC Insulating Spade Connector Cover - 2.8mm
| Brand: FrozenCPU |
|
|
FrozenCPU Quick Disconnect PVC Insulating Spade Connector Cover - 2.8 are a great way to shield your quick disconnect cables, spade connectors.
These are sold as individual connector covers.
|
Submit a review
|
$0.25
|
 |
FrozenCPU Quick Disconnect PVC Insulating Spade Connector Cover - 4.8mm
| Brand: FrozenCPU |
|
|
FrozenCPU Quick Disconnect PVC Insulating Spade Connector Cover - 4.8 are a great way to shield your quick disconnect cables, spade connectors.
These are sold as individual connector covers.
|
Submit a review
|
$0.25
|
 |
FrozenCPU Standard Motherboard HDD LED Extension Cable
| Brand: FrozenCPU |
|
|
This cable plugs into the motherboard and gives you an extra foot (12" / 305mm) of cable to allow you to route the cable around and out of site. Plug two of these cables together to get 2 feet of extension.
|
Submit a review
|
$2.99
|
 |
FrozenCPU Standard Motherboard Power LED Extension Cable
| Brand: FrozenCPU |
|
|
This cable plugs into the motherboard and gives you an extra foot (12" / 305mm) of cable to allow you to route the cable around and out of site. Plug two of these cables together to get 2 feet of extension.
|
Submit a review
|
$2.99
|
 |
FrozenCPU Standard Motherboard Power Switch Extension Cable
| Brand: FrozenCPU |
|
|
This cable plugs into the motherboard and gives you an extra foot (12" / 305mm) of cable to allow you to route the cable around and out of site. Plug two of these cables together to get 2 feet of extension.
|
Submit a review
|
$2.99
|
 |
FrozenCPU Standard Motherboard Reset Switch Extension Cable
| Brand: FrozenCPU |
|
|
This cable plugs into the motherboard and gives you an extra foot (12" / 305mm) of cable to allow you to route the cable around and out of site. Plug two of these cables together to get 2 feet of extension.
|
Submit a review
|
$2.99
|
 |
FrozenCPU.com PCI Slot Device Switch - 4-Pin Molex w/ Bypass
| Brand: Phobya |
|
|
The FrozenCPU.com PCI Slot Device Switch - 4-Pin Molex w/ Bypass is a simple way to have full control of your devices. A single 4-Pin molex powers the device (with bypass) and allows ON/OFF control via a rear PCI slot switch. Use this to have complete control of any 4-pin molex device or even for entire LED or peripheral control boards.
|
Submit a review
|
$12.99
|
 |
Logisys 12V 15A Remote Control (RM02)
| Brand: Logisys |
|
|
This ingenious kit allows you to remotely control any 12 Volt DC device. Perfect for controlling any 12V devices such as Lights , Fans, Landscaping Lighting and more. The kit includes one 12 Volt DC remote relay switch receiver, and two automotive quality key for transmitters. This easy-to- wire kit is perfect for anybody with a basic knowledge of electrical wiring, ...
|
Submit a review
|
$17.99
|
 |
Logisys 12V 15A Remote Control - Momentary (RM02M)
| Brand: Logisys |
|
|
This ingenious kit allows you to remotely control any 12 Volt DC device. This particular version is a momentary meaning single button, press to turn on, release to turn off! Perfect for controlling any 12V devices that are powered via a momentary switch. The kit includes one 12 Volt DC remote relay switch receiver, and two automotive quality key for transmitters. T...
|
Submit a review
|
$24.99
|
 |
Logisys 12V 4 Channel Remote Control (RM04)
| Brand: Logisys |
|
|
The Logisys 12V 4 Channel Remote Control is a wireless remote control used to switch on and off for up to 4 different devices such as computer accessories, automobile lighting kits or any other 12 Volt electronic applications. Some hands-on skills are required for installation of the product.
|
Submit a review
|
$34.99
|
 |
Logisys 12V 4 Zone Multi-Mode Channel Remote Control (RM08)
| Brand: Logisys |
|
|
This is a 4-Channel (Zone) Multifunctional 12VDC Remote Controlled Relay. Each Channel can be selected by 1, 2, 3, 4 buttons. Each channel has 4 functions A, B, C, D. Each time you press A key, brightness reduce 1 step and for a total of 8 steps and back to the brightest. Function B allow user to enter 6-step strobe mode which flashes 2~7 times, pause for 400ms and fl...
|
Submit a review
|
$37.99
|
 |
Logisys 12V Lighting Mode Remote Control Kit (RM06)
| Brand: Logisys |
|
|
This 12VDC Lighting Mode Remote Control Kit remotely controls ON and OFF, continuously ON from dim to brightest that goes circled around, 8 grades of solid ON from dim to brightest, ON with stroke mode. It is ideal for 12V lighting projects and applications.
|
Submit a review
|
$21.99
|
 |
Logisys 12V Polarity Switchable Remote Control (RM03)
| Brand: Logisys |
|
|
The Logisys 12V Polarity Switchable Remote Control is a 12 V DC Latch Mode On / Off Relay with polarity switch. When the unit is On - each button can turn off the unit. However, each button controls a different polarity. So, for example, if you turn it on with the left button, you can turn it off with either button and then turning it on again with right button, th...
|
Submit a review
|
$19.95
|
|
Logisys 12V Remote Control (RM01)
| Brand: Logisys |
|
|
Every once in a while a new product comes along that everybody is charmed by and has a use for. The 12 Volt Remote Control is one of those. This unit can control 72 Watts of power (6 Amps) and has an incredible range - we've got it to work over 60 feet away! It can control lights, fans, front bay devices, plasma balls or anything else that runs on 12 Volts!
While w...
|
Submit a review
|
$13.99
|
 |
Logisys 2 Zone 12V / 15A Remote Control (RM022A)
| Brand: Logisys |
|
|
This is a 2-zone (2-Channel)12VDC ON and OFF relay controlled by one keychain style handheld transmitter. There are 2 sets of ON and OFF keys, total 4keys to individually control the two zones.
the keychain style transmitter was made with a solid metal frame and a sliding protection cover to avoid the accidental press of the keys.
This is a 2 zone receiver with ...
|
Submit a review
|
$24.99
|
 |
Logisys 2 Zone 12V / 6A Remote Control (RM012A)
| Brand: Logisys |
|
|
This is a 2-zone (2-Channel)12VDC ON and OFF relay controlled by one keychain style handheld transmitter. There are 2 sets of ON and OFF keys, total 4keys to individually control the two zones.
the keychain style transmitter was made with a solid metal frame and a sliding protection cover to avoid the accidental press of the keys.
This is a 2 zone receiver with ...
|
Submit a review
|
$20.99
|
 |
Logisys 4 Channel 12V Remote Control Kit - Dual Latching / Dual Momentary (RM09)
| Brand: Logisys |
|
|
RM09 is a 12VDC remote control relay switch with four (4) power outputs, two (2) of them are latch mode and the other two (2) are momentary mode. RM09 is suitable on/off remote relay switch can be used in conjunction with any 12VDC applications such as lighting, landscaping, automobile or PC modding etc. RM09 is water proof, weather resistant and shock resistant. It i...
|
Submit a review
|
$34.99
|
 |
Logisys PC Remote Start / Reset Controller (RMPC2)
| Brand: Logisys |
|
|
RMPC2 is a patent pending PCI controller that turns ON / OFF / RESET your computer remotely. You can either manually control the ON/OFF/RESET from the front panel buttons or remotely from the PC remote controller or you can disconnect the POWER and RESET buttons on the front panel but control it remotely through the PC remote controller.
|
Submit a review
|
$29.99
|
 |
Mod/Smart 2.8mm Vandal Resistant Switch Wire Harness - 2 x 2-Pin Power LED - (Wire-SWT-2.8-LED)
| Brand: Mod/Smart |
|
|
The Mod/Smart 2.8mm Switch Wire Harness is designed to work with the 12 volt ready Vandal Style Switches. This Universal model features a split 2-pin motherboard connector design which allows this cable to work as for any LED header configuration. The spade connectors easily connect to the switch.
|
Submit a review
|
$3.99
|
 |
Mod/Smart 2.8mm Vandal Resistant Switch Wire Harness - 2 x 2-Pin Power Switch - (Wire-SWT-2.8-SW)
| Brand: Mod/Smart |
|
|
The Mod/Smart 2.8mm Switch Wire Harness is designed to work with the 12 volt ready Vandal Style Switches. This Universal model features a 2-pin motherboard connector design which allows this cable to work as power switch or reset switch. The spade connectors easily connect to the switch.
|
Submit a review
|
$3.99
|
 |
Mod/Smart 2.8mm Vandal Resistant Switch Wire Harness - 4 x 2-Pin Power Switch & LED - (Wire-SWT-2.8)
| Brand: Mod/Smart |
|
|
The Mod/Smart 2.8mm Switch Wire Harness is designed to work with the 12 volt ready Vandal Style Switches. This Universal model features a 2-pin motherboard connector design which allows this cable to work as power switch or reset switch. The spade connectors easily connect to the switch.
Note: The cable comes with clear heatshrink over the wires but not heated by t...
|
Read reviews
Submit a review
|
$7.99
|
|
Mod/Smart 4.8mm Switch Wire Harness - 2 x 2-Pin Power LED - (Wire-SWT-4.8-LED)
| Brand: Mod/Smart |
|
|
The Mod/Smart 4.8mm Switch Wire Harness is used for momentary switches that have 4.8mm terminal ends. This Universal model features a split 2-pin motherboard connector design which allows this cable to work for any LED header configuration.
|
Submit a review
|
$3.99
|
|
Mod/Smart 4.8mm Switch Wire Harness - 2 x 2-Pin Power Switch - (Wire-SWT-4.8-SW)
| Brand: Mod/Smart |
|
|
The Mod/Smart 4.8mm Switch Wire Harness is used for momentary switches that have 4.8mm terminal ends. This Universal model features a 2-pin motherboard connector design which allows this cable to work as power switch or reset switch.
|
Submit a review
|
$3.99
|
|
Mod/Smart 4.8mm Switch Wire Harness - 4 x 2-Pin Power Switch & LED - (Wire-SWT-4.8)
| Brand: Mod/Smart |
|
|
The Mod/Smart 4.8mm Switch Wire Harness is used for momentary switches that have 4.8mm terminal ends. This Universal model features a 2-pin motherboard connector design which allows this cable to work as power switch or reset switch.
Note: The cable comes with clear heatshrink over the wires but not heated by the factory. We can change the heatshrink and sleeving ...
|
Submit a review
|
$7.99
|
|
Mod/Smart 6.3mm Switch Wire Harness - 2 x 2-Pin Power LED - (Wire-SWT-6.3-LED)
| Brand: Mod/Smart |
|
|
The Mod/Smart 6.3mm Switch Wire Harness is used for momentary switches that have 6.3mm terminal ends. This Universal model features a split 2-pin motherboard connector design which allows this cable to work for any LED header configuration. This cable is great for larger terminal switches suck as duckbill switches.
|
Submit a review
|
$3.99
|
45969 fans like us!
About Us
Site Map
Shop by Brand
Liquid Cooling
10 In Stock, Ships Today Till 6pm EST
