 |
Koolance (High Flow) QDC Shutoff Nozzle, Female Threaded G 1/4 (VL3-FG)
| Brand: Koolance |
|
 |
Koolance (patent-pending) quick-disconnect shutoff valve. G 1/4 threaded female nozzle for screwing directly into a water block or other component. It will fit any Koolance VL3 High Flow male shutoff valve.
Koolance's new VL2 & VL3 quick disconnects offer easier connection and disconnection than previous VLV models. The internal flow characteristics have also been ...
|
Submit a review
|
$10.99
|
 |
Koolance 10mm, 3/8" Panel Mount Nozzle - Single - G1/4" Thread (NZL-V10BXG-P)
| Brand: Koolance |
|
|
Panel mounted fitting with G 1/4" threaded socket on one side, and 3/8" (10mm) hose barb on the other. Nickel-plated brass. Hose clamp and hex nut are included.
|
Submit a review
|
$9.99
|
 |
Koolance 13mm, 1/2" Panel Mount Nozzle - Single - G1/4" Thread (NZL-V13BXG-P)
| Brand: Koolance |
|
|
Panel mounted fitting with G 1/4" threaded socket on one side, and 1/2" (13mm) hose barb on the other. Nickel-plated brass. Hose clamp and hex nut are included.
|
Submit a review
|
$11.99
|
 |
Koolance Dual VID Connector - Adjustable 1 Slot Spacing ( CNT-VDA2 )
| Brand: Koolance |
|
 |
Adjustable direct connection nozzle for supported Koolance VID coolers in series or parallel. CNT-VDA2 is for SLI or CrossFire setups that span three card slots (one in between is bypassed). Koolance VID water blocks occupy the same slot as the video card.
G 1/4" threading, nickel-plated brass with compression fittings and gaskets. Will work with any hose diameter ...
|
Submit a review
|
$13.99
|
 |
Koolance Dual VID Connector - Adjustable 3-4 Slot Spacing (CNT-VDA34)
| Brand: Koolance |
|
|
Adjustable direct connection nozzle for supported Koolance VID coolers in series or parallel. CNT-VDA34 is for SLI or CrossFire setups that span four to five card slots (two to three in between are bypassed). Koolance VID water blocks occupy the same slot as the video card.
G 1/4" threading, nickel-plated brass with compression fittings and gaskets. Will work with ...
|
Submit a review
|
$15.99
|
 |
Koolance INS-FLTR01 Inline Coolant Filter
| Brand: Koolance |
|
|
The Koolance INS-FLTR01 Inline Coolant Filter is designed for keeping accidental debris and sediment from damaging the pump or clogging other components. It can filter particles down to 1mm (1/32") in diameter.
G 1/4" sockets are provided on both sides, with one male and one female for easy installation into the inlet of a water block, pump, or heat exchanger. Nick...
|
Submit a review
|
$10.99
|
 |
Koolance L-Bracket with Dual G 1/4 Socket Fittings (BKT-PCI-G)
| Brand: Koolance |
|
|
Double G 1/4 socket fittings integrated into a rear computer slot bracket. Threaded nozzles are used for the inside and outside (2 pair, not included). Nickel-plated brass.
|
Submit a review
|
$12.99
|
 |
Koolance Nozzle Coupling Adapter, Female-Female (ADT-XFF)
| Brand: Koolance |
|
|
The Koolance Nozzle Coupling Adapter provides a convenient coupler for converting between any two G 1/4 BSP threaded nozzles. Easily adapt any tubing diameter to another, for example, or a swiveling connection to a hose barb. Nickle-plated brass.
NOTE: Koolance G 1/4 BSP threaded nozzles are recommended for this product due to their short thread length (4mm). Other...
|
Submit a review
|
$3.99
|
 |
Koolance QDC (Low Profile) Shutoff Nozzle, Female Threaded G 1/4 (VL2-FG)
| Brand: Koolance |
|
|
Koolance (patent-pending) quick-disconnect shutoff valve. G 1/4 threaded female nozzle for screwing directly into a water block or other component. It will fit any Koolance VL2 Low Profile male shutoff valve.
Koolance's new VL2 & VL3 quick disconnects offer easier connection and disconnection than previous VLV models. The internal flow characteristics have also bee...
|
Submit a review
|
$9.99
|
 |
Koolance Sliding 180-Degree "U" Connector - (CNT-MEAU)
| Brand: Koolance |
|
|
Swiveling, adjustable 180-degree "U" connector for RAM-33 or other products. Can be expanded from a total length of 37.5mm (1.5") to 41.5mm (1.6"). Nickel-plated brass, G 1/4 threading.
|
Submit a review
|
$10.99
|
 |
Koolance Swiveling G1/4 Threaded 45 Degree Low Profile Angle Fitting - Single (NZL-DXG-V2)
| Brand: Koolance |
|
|
Create a swiveling 45 degree elbow bend using any Koolance G 1/4 threaded nozzle, or fitting! For maximum adjustment, consider placing two swiveling elbow fittings together. These are made from nickle-plated brass.
|
Submit a review
|
$9.99
|
 |
Koolance Swiveling G1/4 Threaded Angle Fitting - Single (NZL-LXG1)
| Brand: Koolance |
|
|
Create a swiveling 90 degree elbow bend using any Koolance G 1/4 threaded nozzle, or fitting! For maximum adjustment, consider placing two swiveling elbow fittings together. These are made from nickle-plated brass.
|
Submit a review
|
$10.99
|
 |
Koolance Swiveling G1/4 Threaded Low Profile Angle Fitting - Single (NZL-LXG2)
| Brand: Koolance |
|
|
Create a swiveling 90 degree elbow bend using any Koolance G 1/4 threaded nozzle, or fitting! For maximum adjustment, consider placing two swiveling elbow fittings together. These are made from nickle-plated brass.
|
Submit a review
|
$11.99
|
About Us
Site Map
Shop by Brand
AC Cooling
Fittings-Accessories 