 |
12" 3 Pin Extension Cable
| Brand: FrozenCPU |
|
 |
This 12" cable is for that hard to reach fan header from your cpu or that case fan that just can't make it quite to the fan header on the motherboard. Lots of slack with this one- Full rpm monitoring supported.
|
Read reviews
Submit a review
|
$2.50
|
 |
3 Pin to 2 Pin Adapter Cable - Type A
This adapter cable is perfect for taking todays newest 3 pin fans and outfitting them to work with different style fan headers.
This adapter is good some older style motherboards, video cards, PSU circuit boards, mobile racks, and external enclosures!
|
Submit a review
|
$2.99
|
 |
3 Pin to 2 Pin Adapter Cable - Type C
This adapter cable is perfect for taking todays newest 3 pin fans and outfitting them to work with different style fan headers.
This adapter is good for some motherboards, video cards, PSU circuit boards, mobile racks, and external enclosures!
|
Submit a review
|
$2.99
|
 |
3 Pin to 2 Pin Adapter Cable - Type D
This adapter cable is perfect for taking todays newest 3 pin fans and outfitting them to work with different style fan headers.
This adapter is good some video cards, PSU circuit boards, mobile racks, and external enclosures!
|
Submit a review
|
$2.99
|
 |
3-pin Panaflo Fan Tail
| Brand: Panaflo (NMB-MAT) |
|
|
No more will you have to wire or solder your own lead on your Panaflo fan. You can use these on untailed Panaflo fans. Available with 4 pin power supply connector or 3 pin connector. Panaflo fans come untailed or bare wire leaving you high and dry. We had these special Panaflo connectors made that plug right into the outside of the Panaflo's fan motor. Simply plug the...
|
Submit a review
|
$2.50
|
 |
3-pin Tailed Connector
| Brand: FrozenCPU |
|
|
These are used with fanbus that require tailed fans. If you don't want to cut the 3pin connector of your fans you can use these instead. Also gives a little extention to your fan's plug. Soldered and capped at the ends for no frays! Extra long leads for ease of use.
|
Submit a review
|
$2.00
|
 |
3-pin Tailed Connector 6x
| Brand: FrozenCPU |
|
|
These are used with fanbus that require tailed fans. If you don't want to cut the 3pin connector of your fans you can use these instead. Also gives a little extention to your fan's plug. Soldered and capped at the ends for no frays! Extra long leads for ease of use.
This version comes with six adapters attached but you can easily seperate them for individual use. P...
|
Submit a review
|
$6.00
|
 |
4-pin Panaflo Fan Tail
| Brand: Panaflo (NMB-MAT) |
|
|
No more will you have to wire or solder your own lead on your Panaflo fan. You can use these on untailed Panaflo fans. Available with 4 pin power supply connector or 3 pin connector. Panaflo fans come untailed or bare wire leaving you high and dry. We had these special Panaflo connectors made that plug right into the outside of the Panaflo's fan motor. Simply plug the...
|
Submit a review
|
$2.50
|
 |
4-pin Panaflo Fan Tail w/ RPM Sensor Line
| Brand: Panaflo (NMB-MAT) |
|
|
No more will you have to wire or solder your own lead on your Panaflo fan. You can use these on untailed Panaflo fans. Available with 4 pin power supply connector or 3 pin connector. Panaflo fans come untailed or bare wire leaving you high and dry. We had these special Panaflo connectors made that plug right into the outside of the Panaflo's fan motor. Simply plug the...
|
Submit a review
|
$2.50
|
 |
4-pin PWM Male to 3-pin Female Adapter Cable 12" - Sleeved Black (CB-PWM-3F)
| Brand: FrozenCPU |
|
|
Convert your PWM fan back to standard 3 pin with the 4-pin PWM Male to 3-pin Female Adapter Cable.
|
Submit a review
|
$5.99
|
 |
4-pin Tailed Connector - Female
| Brand: FrozenCPU |
|
|
These are used with fanbus that require tailed fans. If you don't want to cut the power supply connector of your fans you can use these instead. Also gives a little extention to your fan's plug. Soldered and capped at the ends for no frays! Extra long leads for ease of use. Uses female connector on end and thinned leads for longevity.
|
Submit a review
|
$2.50
|
 |
4-pin Tailed Connector - Male
| Brand: FrozenCPU |
|
|
These are used with fanbus that require tailed fans. If you don't want to cut the power supply connector of your fans you can use these instead. Also gives a little extention to your fan's plug. Soldered and capped at the ends for no frays! Uses female connector on end and thinned leads for longevity.
|
Submit a review
|
$2.50
|
 |
FrozenCPU PMW Y Splitter Cable
| Brand: FrozenCPU |
|
|
The FrozenCPU PMW Y Splitter Cable allows one PWM port to control two PWM fans. Only one of the 4-pin connectors reports the fan speed back to the fan controller so as to not confuse it. PWM offers better control than traditional fan power systems and is usually found on the latest motherboards for CPU fan power and more.
|
Submit a review
|
$6.99
|
 |
FrozenCPU Standard 4-Pin to Quad 3-Pin Adapter Cable (PFP18)
| Brand: FrozenCPU |
|
|
The FrozenCPU Standard 4-Pin to Quad 3-Pin Adapter Cable lets you run 4 fans off a single standard 4-Pin Power Connector - great for reducing cable clutter!
|
Submit a review
|
$3.99
|
 |
FrozenCPU.com 3 Speed Fan Power Cable
| Brand: FrozenCPU |
|
|
The FrozenCPU.com 3 Speed Fan Power Cable is a perfect cable to manually set your fans to the desired speeds without using costly devices. Plus it features a pass-through 4-pin connector, so you can easily daisy-chain the cable. Plug your 3-pin fan into the desired voltage cable and your done!
|
Submit a review
|
$6.99
|
 |
FrozenCPU.com 3-Pin to 3-Pin Dell Adapter Cable - 6" Length (CB-3M-D3)
| Brand: FrozenCPU |
|
|
The FrozenCPU.com 3-Pin to 3-Pin Dell Adapter Cable allows you to plug your choice standard 3-pin fan to a Dell's proprietary 3-pin fan header.
|
Submit a review
|
$6.99
|
 |
FrozenCPU.com 4-Pin PWM to 5-Pin Dell Adapter Cable - 8" Length (CB-PWM-D5)
The FrozenCPU.com 4-Pin PWM to 5-Pin Dell Adapter Cable allows you to plug your choice standard 4-pin PWM fan to a Dell's proprietary 5-pin fan header.
|
Submit a review
|
$8.99
|
 |
Nanoxia PWMX 3 to 4 Pin PWM Controller
| Brand: Nanoxia |
|
|
The Nanoxia PWMX 3 to 4 Pin PWM Controller is an innovative product from Nanoxia. With the PWMX Controller it is possible to control standard 3-pin fans via PWM.
The Nanonxia controller chip detects the connected fan and generates the fitting PWM characteristic. This way, every 3-pin fan can be accessed by PWM enabled mainboards.
|
Submit a review
|
$12.99
|
 |
Single Braid Sleeved 12" 3 Pin Extension Cable
| Brand: FrozenCPU |
|
|
Full Color Saturation! Don't be fooled by competitor replicas. This is the real deal!
We rewire the cable for you and single sleeve each wire so no wire color can be seen. For those of you that have tested your hand at sleeving this is no small task. Tested after to ensure reliability and proper wiring this cable can set your mod apart from the rest!
This 12" ca...
|
Submit a review
|
$11.95
|
 |
Single Braid Sleeved 12" Standard 4 Pin Extension Cable
| Brand: FrozenCPU |
|
|
Full Color Saturation! Don't be fooled by competitor replicas. This is the real deal!
We rewire the cable for you and single sleeve each wire so no wire color can be seen. For those of you that have tested your hand at sleeving this is no small task. Tested after to ensure reliability and proper wiring this cable can set your mod apart from the rest!
This cu...
|
Submit a review
|
$16.95
|
 |
SunBeam Multi Fan Power Port (MFPP)
| Brand: Sunbeam |
|
|
This wonderful little device lights up and lets you power six 3-pin tailed fans with just one 12volt 4-pin connector.
|
Read reviews
Submit a review
|
$12.99
|
About Us
Site Map
Shop by Brand
AC Cooling
