 |
Aluminum Foil Temp Sensor Tape - 1 7/8" x 2"
| Brand: FrozenCPU |
|
 |
The Aluminum Foil Temp Sensor Tape is an aluminum based tape for applying temp sensors to hot locations where standard adhesives just won't do. With a max hold temperature of 325° F this stuff will do the trick for sure. This tape can be easily cut with any scissors or knife.
Sold as a 1 7/8" x 2" piece.
|
Submit a review
|
$0.99
|
 |
Aquacomputer G1/4 Flow Meter Sensor Block - (Aquaero Series / Poweradjust / Fan-O-Matic Pro / Alphacool Heatmaster) (53068)
| Brand: Aquacomputer |
|
|
This flow rate sensor from aquacomputer has an extremely low flow resistance and is therefore perfectly suited even for High-flow systems. The Sensor is made from Delrin and stainless steel and is therefore not only technically but also optically exceptionally well-made. The symmetrical design with two identical nozzles allows integration into the system without havin...
|
Submit a review
|
$54.95
|
 |
Bitspower G 1/4" Temperature Sensor Stop Fitting (BP-WTP-CT)
| Brand: Bitspower International Co., Ltd. |
|
|
The Bitspower G 1/4" Temperature Sensor Stop Fitting fits any standard G1/4" threaded port and will report back liquid coolant temperatures to any monitoring device that uses standard 2 Pin temperature probes.
|
Submit a review
|
$9.95
|
 |
Bitspower G 1/4" Temperature Sensor Stop Fitting - Matte Black (BP-MBWP-CT)
| Brand: Bitspower International Co., Ltd. |
|
|
The Bitspower G 1/4" Temperature Sensor Stop Fitting fits any standard G1/4" threaded port and will report back liquid coolant temperatures to any monitoring device that uses standard 2 Pin temperature probes.
|
Read reviews
Submit a review
|
$10.95
|
 |
FrozenCPU.com Custom Thermal-Star / Bitspower Liquid Cooling Temp Probe Display
| Brand: FrozenCPU |
|
|
Combine the visual effect of a Thermal-Star with the integrated power of the Bitspower thermal probe and this is what you get. A single G 1/4 threaded port plug that can be used on any reservoir or device with a spare G1/4 port that displays your fluid temp on the Thermal-Star.
Available in multiple display colors and optional Lian Li bay covers available! Now yo...
|
Read reviews
Submit a review
|
$45.95
|
 |
Innovatek Flow Meter Pro Rev. 3.6 G1/4" Thread Adapter - Single (501256)
| Brand: Innovatek |
|
|
This adapter allows the Innovatek FlowMeter PRO Rev. 3.6 (500870-02) to accept G1/4" threaded fittings so you can adapt the best flow meter to any size system. Don't feel handcuffed any longer just because you use this flow meter. You can now change both side to any G1/4 threaded fitting you want!
Adapter is sold as a single not pair.
|
Submit a review
|
$9.99
|
 |
Innovatek FlowMeter PRO Rev. 3.6 (500870-02)
| Brand: Innovatek |
|
|
The FlowMeter PRO Revision 3.6 is a flow measuring turbine that can be attached directly to your mother board! It will measure the flow of in your watercooling system and indicate the flow value in revolutions per minute so that it can be read directly by your motherboard's BIOS.
The integrated blue LED also allows a visual indication of the flow as it flashes with t...
|
Read reviews
Submit a review
|
$54.99
|
 |
Koolance Coolant Flow Meter (No Nozzles)(INS-FM16)
| Brand: Koolance |
|
|
Koolance's flow meter provides a visual and electronic indicator of real-time coolant flow rate. It is compatible with Koolance TMS, which also allows the internal blue LED lighting to be turned on, off, or pulse according to flow rate. Compatible with 1/4" (6mm), 3/8" (10mm), or 1/2" (13mm) ID G 1/4" threaded nozzles.
|
Read reviews
Submit a review
|
$24.99
|
 |
Koolance Coolant Temperature Sensor Plug, 10K Ohm (SEN-AP008G)
| Brand: Koolance |
|
|
Bare coolant sensor compatible with Koolance multi-sensor systems. Designed to fit any G 1/4 BSP threaded nozzle socket. Wire length = 30" (76cm).
NOTE: This sensor will only work with Koolance products which use 10K Ohm @25°C sensors.
|
Submit a review
|
$10.99
|
 |
Koolance Coolant Temperature Sensor, Brass, 10K Ohm (SEN-AP008PB)
| Brand: Koolance |
|
|
The Koolance coolant temperature sensor can take readings from liquid anywhere in your cooling system. This product is designed to be placed inline on any hose. Simply choose nozzles for the desired hose diameter. Wire length = 30" (76cm). Construction is nickel-plated brass. NOTE: This sensor will only work with Koolance products which use 10K Ohm @25°C sensors (firs...
|
Submit a review
|
$18.99
|
 |
Koolance INS-FM18 Coolant Flow Meter
| Brand: Koolance |
|
|
Koolance's stainless steel and brass inline flow meter provides electronic indication of real-time coolant flow rate. Uses G 1/4 BSP threads.
A frequency circuit (sold separately) multiplies the RPM signal to allow it to be read by most fan tachometer headers (such as those found on ATX motherboards). This signal is intended to allow fan detection software (includi...
|
Read reviews
Submit a review
|
$32.99
|
 |
Liquid Cooling G1/4 Inline Flow Indicator / Filter (71021)
This new flow indicator provides optical indication of coolant flow. The flow sets the wheel into motion, hence showing the flow. Faults such as kinked tubing or similar can hence be controlled optically. The filter has proven not to be obstructive even at higher flow rates. The filter itself catches even the smallest particles in the loop. This is especially useful i...
|
Submit a review
|
$19.99
|
 |
Phobya G1/4 Inline Female to Female Temp Sensor Coupler - 2-Pin - (71155)
| Brand: Phobya |
|
|
Highly precise In-line temperature sensor for almost all G1/4" threads. The sensor can be integrated at any point in the cooling loop. At the measuring point the wall thickness of the casing is reduced to <1mm and the sensor is insulated from the outside to allow maximum precision and quick reaction of the measurement. The sensor can be used universally with the moni...
|
Submit a review
|
$11.95
|
 |
Phobya G1/4 Inline Temp Sensor Coupler - 2-Pin (71170)
| Brand: Phobya |
|
|
The new temperature sensor from Phobya with G1/4" inner thread and G1/4" outer thread respectively. With its compact design this sensor can be integrated into the cooling loop at virtually any suitable thread. Its timeless design makes it blend right into the system, especially as it's low height of only 11,6mm (without threads) allows it to fit below almost any conne...
|
Submit a review
|
$12.99
|
 |
Phobya G1/4 Temp Sensor Fitting Plug - 2-Pin - Black Nickel (71141)
| Brand: Phobya |
|
|
High-precision thermal sensor for G1/4 inch thread. Can directly be installed into a thread of a reservoir such as Coolplex, Aluminum tube or Bullseye are screwed and seal of a durable O-ring. The shaft is knurled, which facilitates the insertion by hand, the remaining wall thickness is reduced to <1mm, which enables precise and fast measurements. It is universally ap...
|
Read reviews
Submit a review
|
$10.95
|
 |
Phobya G1/4 Temp Sensor Fitting Plug - 2-Pin - Silver (71006)
| Brand: Phobya |
|
|
High-precision thermal sensor for G1/4 inch thread. Can directly be installed into a thread of a reservoir such as Coolplex, Aluminum tube or Bullseye are screwed and seal of a durable O-ring. The shaft is knurled, which facilitates the insertion by hand, the remaining wall thickness is reduced to <1mm, which enables precise and fast measurements. It is universally ap...
|
Submit a review
|
$9.95
|
 |
Tubing Temp Sensor 2-Pin - 1/4" ID (8mm) Tubing
The Tubing Temp Sensor 2-Pin - 1/4" ID (8mm) Tubing is a simple solution to getting accurate readings for your liquid cooling system. Why waste your drain port tube when you can plug it with this temp sensor and get a true temp reading of your coolant.
|
Submit a review
|
$4.99
|
2919 fans like us!
About Us
Site Map
Shop by Brand
Liquid Cooling
