 |
Aquacomputer Aquaero Flow Sensor Connection Cable (53027)
| Brand: Aquacomputer |
|
 |
Three-wire cable to connect the flow sensor (No. 53068) to aquaero 4.00 aquastream, Ultra XT or poweradjust. Length 30 cm, both sides plug (special plug on the sensor). The cable can be extended if required by a standard 3-pin fan extension cable.
|
Submit a review
|
$4.99
|
 |
Aquacomputer G1/4 Flow Meter Sensor Block - (Aquaero Series / Poweradjust / Fan-O-Matic Pro / Alphacool Heatmaster) (53068)
| Brand: Aquacomputer |
|
|
This flow rate sensor from aquacomputer has an extremely low flow resistance and is therefore perfectly suited even for High-flow systems. The Sensor is made from Delrin and stainless steel and is therefore not only technically but also optically exceptionally well-made. The symmetrical design with two identical nozzles allows integration into the system without havin...
|
Submit a review
|
$54.95
|
 |
Innovatek FlowMeter PRO Rev. 3.6 (500870-02)
| Brand: Innovatek |
|
|
The FlowMeter PRO Revision 3.6 is a flow measuring turbine that can be attached directly to your mother board! It will measure the flow of in your watercooling system and indicate the flow value in revolutions per minute so that it can be read directly by your motherboard's BIOS.
The integrated blue LED also allows a visual indication of the flow as it flashes with t...
|
Read reviews
Submit a review
|
$54.99
|
 |
Koolance ADT-FM03 Flow Meter Frequency Adapter (for INS-FM17N)
| Brand: Koolance |
|
|
Frequency adapter board and power cable for the INS-FM17N flow meter. The Koolance ADT-FM03 Flow Meter Frequency Adapter is a frequency circuit that multiplies the RPM signal to allow it to be read by most fan tachometer headers (such as those found on ATX motherboards). This signal is intended to allow fan detection software (including BIOS) to enable the appropriat...
|
Read reviews
Submit a review
|
$22.99
|
 |
Koolance Coolant Flow Meter (No Nozzles)(INS-FM16)
| Brand: Koolance |
|
|
Koolance's flow meter provides a visual and electronic indicator of real-time coolant flow rate. It is compatible with Koolance TMS, which also allows the internal blue LED lighting to be turned on, off, or pulse according to flow rate. Compatible with 1/4" (6mm), 3/8" (10mm), or 1/2" (13mm) ID G 1/4" threaded nozzles.
|
Read reviews
Submit a review
|
$24.99
|
 |
Koolance INS-FM17N Coolant Flow Meter
| Brand: Koolance |
|
|
Koolance's inline flow meter provides a visual and electronic indicator of real-time coolant flow rate. Compatible with 1/4" (6mm), 3/8" (10mm), or 1/2" (13mm) ID G 1/4 BSP threaded nozzles.
A frequency circuit (sold separately) multiplies the RPM signal to allow it to be read by most fan tachometer headers (such as those found on ATX motherboards). This signal is ...
|
Read reviews
Submit a review
|
$23.99
|
 |
Koolance INS-FM18 Coolant Flow Meter
| Brand: Koolance |
|
|
Koolance's stainless steel and brass inline flow meter provides electronic indication of real-time coolant flow rate. Uses G 1/4 BSP threads.
A frequency circuit (sold separately) multiplies the RPM signal to allow it to be read by most fan tachometer headers (such as those found on ATX motherboards). This signal is intended to allow fan detection software (includi...
|
Read reviews
Submit a review
|
$32.99
|
3438 fans like us!
About Us
Site Map
Shop by Brand
Liquid Cooling
