 |
3/8" to 1/2" Tube OD Quick-Connect Collets
| Brand: Swiftech |
|
 |
Set of two 3/8" tube to 1/2" tube OD quick-connect fittings. One with blue collet and one with red collet to indicate intake and exhaust.
|
Submit a review
|
$6.00
|
 |
Danger Den Premium Tube Cutter - Designed For 3/4" OD Tubing Max
| Brand: FrozenCPU |
|
|
This is a simple tube cutter from Danger Den that makes perfect cuts when cutting whatever size water tubing (1/4" ID, 3/8" ID, 1/2" ID). This cutter can handle up to 3/4" OD tubing. The Danger Den Tube Cutter is an ideal device for any water cooling enthusiast.
|
Read reviews
Submit a review
|
$9.99
|
 |
IandH Silver KillCoils - Antimicrobial .999 Fine Silver Tubing / Reservoir Strip
| Brand: I&H Accessories |
|
|
ianh Silver KillCoils are just the trick for liquid cooling loops. These helix shaped coils fit nicely in tubing or reservoirs and are large enough to not pass through fittings ect. By placing silver into your loop your algae days are over! Use the name you know and trust..... KillCoils!
|
Read reviews
Submit a review
|
$6.99
|
 |
Innovatek Anti-kink Springs for 8mm Tubing (4 pk) (500366)
| Brand: Innovatek |
|
|
Simply slip these springs over 8mm tubing (the stock tubing in the innovatek H2O kits). The springs provide support around bends and loops to help stop kinking at these stress points. Sold in packs of four. Each spring measures 12cm long.
Warning: Use of fluids other than the Innovatek Protect family is not recommended. Innovatek will not RMA defective products t...
|
Submit a review
|
$6.99
|
 |
Innovatek Multiple Hose Holder - 10mm / 3/8" OD Tubing (500499)
| Brand: Innovatek |
|
|
These hose holders come in pack of 6. They are attached but can be separated to hold more or less tubing. Good for routing water hose in your case. These are compatible with 10mm or 3/8" OD tubing!
|
Submit a review
|
$5.99
|
 |
Phobya Anti-Kink 90° Angled Tubing Mount - 1/2" OD (13mm) (68148)
Phobyas anti-kinking solution for tight bending corners!
Tubing installation is often a compromise between perfect implementation and the limitations of the hose and case. The best solution is only possible with some accessories. There are multiple solutions on the market: Angled connector pieces and fittings with the disadvantage of an increased flow resistance, a...
|
Submit a review
|
$4.29
|
|
Phobya Anti-Kink 90° Angled Tubing Mount - 3/4" OD (19mm) (68150)
Phobyas anti-kinking solution for tight bending corners!
Tubing installation is often a compromise between perfect implementation and the limitations of the hose and case. The best solution is only possible with some accessories. There are multiple solutions on the market: Angled connector pieces and fittings with the disadvantage of an increased flow resistance, a...
|
Submit a review
|
$4.99
|
|
Phobya Anti-Kink 90° Angled Tubing Mount - 3/8" OD (10mm) (68146)
Phobyas anti-kinking solution for tight bending corners!
Tubing installation is often a compromise between perfect implementation and the limitations of the hose and case. The best solution is only possible with some accessories. There are multiple solutions on the market: Angled connector pieces and fittings with the disadvantage of an increased flow resistance, a...
|
Submit a review
|
$3.49
|
|
Phobya Anti-Kink 90° Angled Tubing Mount - 3/8" OD (11mm) (68147)
Phobyas anti-kinking solution for tight bending corners!
Tubing installation is often a compromise between perfect implementation and the limitations of the hose and case. The best solution is only possible with some accessories. There are multiple solutions on the market: Angled connector pieces and fittings with the disadvantage of an increased flow resistance, a...
|
Submit a review
|
$3.99
|
|
Phobya Anti-Kink 90° Angled Tubing Mount - 5/8" OD (16mm) (68149)
Phobyas anti-kinking solution for tight bending corners!
Tubing installation is often a compromise between perfect implementation and the limitations of the hose and case. The best solution is only possible with some accessories. There are multiple solutions on the market: Angled connector pieces and fittings with the disadvantage of an increased flow resistance, a...
|
Submit a review
|
$4.49
|
 |
Phobya Multiple Tubing Holder - 3/4" OD (19mm) - (60015)
| Brand: Phobya |
|
|
For clean tubing management the hose is simply pushed into the clip. This helps greatly to achieve a clean design. The clips can either be glued on (hot glue, double-sided tape) or fixated through the small hole with e.g. a M3 screw or a piece of wire. The strip consists of 6 clips which can be used separately or together.
|
Submit a review
|
$6.99
|
|
Phobya Multiple Tubing Holder - 5/8" OD (16mm) - (60014)
| Brand: Phobya |
|
|
For clean tubing management the hose is simply pushed into the clip. This helps greatly to achieve a clean design. The clips can either be glued on (hot glue, double-sided tape) or fixated through the small hole with e.g. a M3 screw or a piece of wire. The strip consists of 6 clips which can be used separately or together.
|
Submit a review
|
$5.99
|
 |
Tube Cutter
| Brand: FrozenCPU |
|
|
This is a simple tube cutter that makes perfect cuts when cutting whatever size water tubing (1/4" ID, 3/8" ID, 1/2" ID). This is an ideal device for any water cooling enthusiast.
|
Read reviews
Submit a review
|
$9.95
|
2919 fans like us!
About Us
Site Map
Shop by Brand
Liquid Cooling
