The 12" 10-Pin Internal USB 2.0 Extension Cable is great for connecting your case's USB ports to a motherboard with abnormal placement of the internal USB header. It is also very useful if you are trying to hide cabling from view.
This 12" cable is for that hard to reach fan header from your cpu or that case fan that just can't make it quite to the fan header on the motherboard. Lots of slack with this one- Full rpm monitoring supported.
This cable extends the reach of the 4-pin Pentium 4 Power Connector by 12 inches. Very useful for organizing your cables or sometimes necessary for larger cases.
This cable extends the reach of the 8-pin 12V Power Connector by 12 inches. Very useful for organizing your cables or sometimes necessary for larger cases.
This adaptor will glow when exposed to UV light. It allows for two 3 pin fans to use one motherboard header. Make sure you are careful about the amount of power you draw from your motherboard.
This cable plugs into the motherboard and gives you an extra foot (12" / 305mm) of cable to allow you to route the cable around and out of site. Plug two of these cables together to get 2 feet of extension.
This cable plugs into the motherboard and gives you an extra foot (12" / 305mm) of cable to allow you to route the cable around and out of site. Plug two of these cables together to get 2 feet of extension.
This cable plugs into the motherboard and gives you an extra foot (12" / 305mm) of cable to allow you to route the cable around and out of site. Plug two of these cables together to get 2 feet of extension.