The 12" 10-Pin Internal USB 2.0 Extension Cable is great for connecting your case's USB ports to a motherboard with abnormal placement of the internal USB header. It is also very useful if you are trying to hide cabling from view.
This 12" cable is for that hard to reach fan header from your cpu or that case fan that just can't make it quite to the fan header on the motherboard. Lots of slack with this one- Full rpm monitoring supported.
The 12" 6 Pin PCI-Express Extension Cable is great for hiding your power cables - you can make your video power cable long enough with this cable to route it behind the motherboard tray.
The 12" 8 Pin EPS Extension Cable is great for hiding your power cables - you can make your power cable long enough with this cable to route it behind the motherboard tray.
This cable extends the reach of the 4-pin Pentium 4 Power Connector by 12 inches. Very useful for organizing your cables or sometimes necessary for larger cases.
This cable extends the reach of the 8-pin 12V Power Connector by 12 inches. Very useful for organizing your cables or sometimes necessary for larger cases.
This custom cable is for that hard to reach fan header or that pesky device that is just out of reach. This cable is also good for perfecting your cable management. You choose the length in the options and we'll custom manufacture the cable for your order. Hide all your cables with this custom length cable!
This adaptor will glow when exposed to UV light. It allows for two 3 pin fans to use one motherboard header. Make sure you are careful about the amount of power you draw from your motherboard.
This cable plugs into the motherboard and gives you an extra foot (12" / 305mm) of cable to allow you to route the cable around and out of site. Plug two of these cables together to get 2 feet of extension.
This cable plugs into the motherboard and gives you an extra foot (12" / 305mm) of cable to allow you to route the cable around and out of site. Plug two of these cables together to get 2 feet of extension.
This cable plugs into the motherboard and gives you an extra foot (12" / 305mm) of cable to allow you to route the cable around and out of site. Plug two of these cables together to get 2 feet of extension.
Use the Liberator Lite cord when you don't need a grounded Power Strip Liberator cable. Just 9 1/2" from tip to tip, the compact Liberator Lite polarized cord allows multiple 2-pronged AC adapters to be connected to a power strip without blocking adjacent outlets.
Get the full use of your power strips and UPS outlets with high-quality Power Strip Liberator® cables. Just plug those big bulky power adapters into the Liberator cable and plug the cable into those previously unusable outlets!
Have a power cord that just barely won't reach? Buy one of these handy 1-foot extensions and forget about those long, tangled extension cor...
The Power Strip Liberator Plus 3 Prong Cable Management Power Cable effectively doubles your power strip's outlets. It also manages to organize those space hogging power bricks. Get the full use of your power strips and UPS outlets and double your number of outlets. With the pass-through plug, you get twice as many outlets and the one foot extension makes sure ever...
Travel Liberator cord features a "Y" splitter that takes power from one outlet and sends it to two. Charge your laptop and your cell phone from the same outlet, this is a must-have for frequent travelers or anyone that just needs one more outlet.
The Powersquid 1000 Joules Surge Protector has flexible power tentacles that accept power bricks of any size without blocking adjacent outlets thus eliminating power strip crowding. The Power squid provides clean, surge-protected power to your valuable electronic equipment and also provides protection for coaxial and phone lines. Without a doubt, the Powersquid 1000...