Est. 1999
Phone: 1.877.2.GET.COOL (1.877.243.8266)   Hours: M-F 10-6, Sat 11-4 56801 fans like us! Bookmark and Share


168 users browsing
  Switch to gallery view

Switch Cabling  Results 1-25 of 25
Sort By:
Cold Cathode LED Rocker Switch Cable Harness - CUSTOM Cold Cathode LED Rocker Switch Cable Harness - CUSTOM
Brand: FrozenCPU  

The Cold Cathode LED Rocker Switch Cable Harness is designed to control your cathode lights. Replacing the harness on your cathode lights with this allows immediate control of the lights using a LED rocker switch. Cable is wired to power rocker LED with the cathode so both are ON / OFF simultaneously.


Submit a review
$12.99

Customizable LED Military Switch Cable Harness Customizable LED Military Switch Cable Harness
Brand: FrozenCPU  

The LED Military Switch Cable Harness is used to control any 4-pin molex powered device. Fans, lights and other molex driven devices can be hooked up to this cable and controlled via the military style switch. The cable harness is also wired to power the LED on the switch when the switch is on! One cable does it all to power your military switch!


Submit a review
$11.99

Customizable Military Switch Cable Harness Customizable Military Switch Cable Harness
Brand: FrozenCPU  

The Military Switch Cable Harness is used to control any 4-pin molex powered device. Fans, lights and other molex driven devices can be hooked up to this cable and controlled via the military style switch.


Submit a review
$10.99

Customizable Rocker Switch Cable Harness Customizable Rocker Switch Cable Harness
Brand: FrozenCPU  

The Rocker Switch Cable Harness is used to control any 4-pin molex powered device. Fans, lights and other molex driven devices can be hooked up to this cable and controlled via the rocker switch.


Submit a review
$10.99

FrozenCPU EZ Switch Cable - 2-Pin HDD LED FrozenCPU EZ Switch Cable - 2-Pin HDD LED
Brand: FrozenCPU  

These exclusive cables are designed to operate the Vandal Switch with ring illumination. Plug the spade connectors of this LED cable onto the outer most connectors on the Vandal switch and plug the other end onto your motherboard's HDD LED jumper. The required resistor for the LED is built into the cable.


Read reviews
Submit a review
$3.99

FrozenCPU EZ Switch Cable - 2-Pin Reset SW FrozenCPU EZ Switch Cable - 2-Pin Reset SW
Brand: FrozenCPU  

These exclusive cables are designed to operate the Vandal Switch with ring illumination. Plug the spade connectors of this reset switch cable onto the inner most connectors on the Vandal switch and plug the other end onto your motherboard's Reset Switch jumper.


Read reviews
Submit a review
$3.99

FrozenCPU EZ Switch Cable - 3-Pin Power LED FrozenCPU EZ Switch Cable - 3-Pin Power LED
Brand: FrozenCPU  

These exclusive cables are designed to operate the Vandal Resistant Switch with ring illumination. Plug the spade connectors of this LED cable onto the outer most connectors on the Vandal Resistant switch and plug the other end onto your motherboard's Power LED jumper. The required resistor for the LED is built into the cable.


Read reviews
Submit a review
$3.99

FrozenCPU Standard Motherboard HDD LED Extension Cable FrozenCPU Standard Motherboard HDD LED Extension Cable
Brand: FrozenCPU  

This cable plugs into the motherboard and gives you an extra foot (12" / 305mm) of cable to allow you to route the cable around and out of site. Plug two of these cables together to get 2 feet of extension.


Submit a review
$2.99

FrozenCPU Standard Motherboard Power LED Extension Cable FrozenCPU Standard Motherboard Power LED Extension Cable
Brand: FrozenCPU  

This cable plugs into the motherboard and gives you an extra foot (12" / 305mm) of cable to allow you to route the cable around and out of site. Plug two of these cables together to get 2 feet of extension.


Submit a review
$2.99

FrozenCPU Standard Motherboard Power Switch Extension Cable FrozenCPU Standard Motherboard Power Switch Extension Cable
Brand: FrozenCPU  

This cable plugs into the motherboard and gives you an extra foot (12" / 305mm) of cable to allow you to route the cable around and out of site. Plug two of these cables together to get 2 feet of extension.


Submit a review
$2.99

FrozenCPU Standard Motherboard Reset Switch Extension Cable FrozenCPU Standard Motherboard Reset Switch Extension Cable
Brand: FrozenCPU  

This cable plugs into the motherboard and gives you an extra foot (12" / 305mm) of cable to allow you to route the cable around and out of site. Plug two of these cables together to get 2 feet of extension.


Submit a review
$2.99

FrozenCPU.com PCI Slot Device Switch - 4-Pin Molex w/ Bypass FrozenCPU.com PCI Slot Device Switch - 4-Pin Molex w/ Bypass
Brand: Phobya  

The FrozenCPU.com PCI Slot Device Switch - 4-Pin Molex w/ Bypass is a simple way to have full control of your devices. A single 4-Pin molex powers the device (with bypass) and allows ON/OFF control via a rear PCI slot switch. Use this to have complete control of any 4-pin molex device or even for entire LED or peripheral control boards.


Submit a review
$12.99

Mod/Smart 2.8mm Vandal Resistant Switch Wire Harness - 2 x 2-Pin Power LED - (Wire-SWT-2.8-LED) Mod/Smart 2.8mm Vandal Resistant Switch Wire Harness - 2 x 2-Pin Power LED - (Wire-SWT-2.8-LED)
Brand: Mod/Smart  

The Mod/Smart 2.8mm Switch Wire Harness is designed to work with the 12 volt ready Vandal Style Switches. This Universal model features a split 2-pin motherboard connector design which allows this cable to work as for any LED header configuration. The spade connectors easily connect to the switch.


Submit a review
$3.99

Mod/Smart 2.8mm Vandal Resistant Switch Wire Harness - 2 x 2-Pin Power Switch - (Wire-SWT-2.8-SW) Mod/Smart 2.8mm Vandal Resistant Switch Wire Harness - 2 x 2-Pin Power Switch - (Wire-SWT-2.8-SW)
Brand: Mod/Smart  

The Mod/Smart 2.8mm Switch Wire Harness is designed to work with the 12 volt ready Vandal Style Switches. This Universal model features a 2-pin motherboard connector design which allows this cable to work as power switch or reset switch. The spade connectors easily connect to the switch.


Submit a review
$3.99

Mod/Smart 2.8mm Vandal Resistant Switch Wire Harness - 4 x 2-Pin Power Switch & LED - (Wire-SWT-2.8) Mod/Smart 2.8mm Vandal Resistant Switch Wire Harness - 4 x 2-Pin Power Switch & LED - (Wire-SWT-2.8)
Brand: Mod/Smart  

The Mod/Smart 2.8mm Switch Wire Harness is designed to work with the 12 volt ready Vandal Style Switches. This Universal model features a 2-pin motherboard connector design which allows this cable to work as power switch or reset switch. The spade connectors easily connect to the switch. Note: The cable comes with clear heatshrink over the wires but not heated by t...


Read reviews
Submit a review
$7.99

Mod/Smart 4.8mm Switch Wire Harness - 2 x 2-Pin Power LED - (Wire-SWT-4.8-LED) Mod/Smart 4.8mm Switch Wire Harness - 2 x 2-Pin Power LED - (Wire-SWT-4.8-LED)
Brand: Mod/Smart  

The Mod/Smart 4.8mm Switch Wire Harness is used for momentary switches that have 4.8mm terminal ends. This Universal model features a split 2-pin motherboard connector design which allows this cable to work for any LED header configuration.


Submit a review
$3.99

Mod/Smart 4.8mm Switch Wire Harness - 2 x 2-Pin Power Switch - (Wire-SWT-4.8-SW) Mod/Smart 4.8mm Switch Wire Harness - 2 x 2-Pin Power Switch - (Wire-SWT-4.8-SW)
Brand: Mod/Smart  

The Mod/Smart 4.8mm Switch Wire Harness is used for momentary switches that have 4.8mm terminal ends. This Universal model features a 2-pin motherboard connector design which allows this cable to work as power switch or reset switch.


Submit a review
$3.99

Mod/Smart 4.8mm Switch Wire Harness - 4 x 2-Pin Power Switch & LED - (Wire-SWT-4.8) Mod/Smart 4.8mm Switch Wire Harness - 4 x 2-Pin Power Switch & LED - (Wire-SWT-4.8)
Brand: Mod/Smart  

The Mod/Smart 4.8mm Switch Wire Harness is used for momentary switches that have 4.8mm terminal ends. This Universal model features a 2-pin motherboard connector design which allows this cable to work as power switch or reset switch. Note: The cable comes with clear heatshrink over the wires but not heated by the factory. We can change the heatshrink and sleeving ...


Submit a review
$7.99

Mod/Smart 6.3mm Switch Wire Harness - 2 x 2-Pin Power LED - (Wire-SWT-6.3-LED) Mod/Smart 6.3mm Switch Wire Harness - 2 x 2-Pin Power LED - (Wire-SWT-6.3-LED)
Brand: Mod/Smart  

The Mod/Smart 6.3mm Switch Wire Harness is used for momentary switches that have 6.3mm terminal ends. This Universal model features a split 2-pin motherboard connector design which allows this cable to work for any LED header configuration. This cable is great for larger terminal switches suck as duckbill switches.


Submit a review
$3.99

Mod/Smart 6.3mm Switch Wire Harness - 2 x 2-Pin Power Switch - (Wire-SWT-6.3-SW) Mod/Smart 6.3mm Switch Wire Harness - 2 x 2-Pin Power Switch - (Wire-SWT-6.3-SW)
Brand: Mod/Smart  

The Mod/Smart 6.3mm Switch Wire Harness is used for momentary switches that have 6.3mm terminal ends. This Universal model features a 2-pin motherboard connector design which allows this cable to work as power switch or reset switch.


Submit a review
$3.99

Mod/Smart 6.3mm Switch Wire Harness - 4 x 2-Pin Power Switch & LED - (Wire-SWT-6.3) Mod/Smart 6.3mm Switch Wire Harness - 4 x 2-Pin Power Switch & LED - (Wire-SWT-6.3)
Brand: Mod/Smart  

The Mod/Smart 6.3mm Switch Wire Harness is used for momentary switches that have 6.3mm terminal ends. This Universal model features a 2-pin motherboard connector design which allows this cable to work as power switch or reset switch. Can also be used with latching switches for different applications, and fits duckbill switches and others using a 6.3mm terminal end. ...


Submit a review
$7.99

Mod/Smart EZ Vandal Switch Cable - Universal Mod/Smart EZ Vandal Switch Cable - Universal
Brand: FrozenCPU  

The Lamptron EZ Vandal Switch Cable is designed to work with the 12 volt ready Vandal resistant Style Switches. This Universal model features a modular motherboard connector design allows this cable to work as power switch, reset switch or even BIOS reset switch. The spade connectors easily connect to the switch.


Submit a review
$7.99

Prewired Vandal Resistant Momentary Power Switch w/ LED Prewired Vandal Resistant Momentary Power Switch w/ LED
Brand: FrozenCPU  

This cable is prewired for ease of installation. Connected wires are ready to plug into your power switch and power LED motherboard headers. A perfect combination for modders! Cable comes stock 1 foot long!


Read reviews
Submit a review
$24.95

Replacement 2 Pin Reset Switch Cable w/ Switch Replacement 2 Pin Reset Switch Cable w/ Switch
Brand: FrozenCPU  

The Reset Switch Cable w/ Switch is a replacement cable for broken reset switches. Easy to install and can be placed just about anywhere that is convenient.


Submit a review
$9.99

Vandal Resistant Style Latching Switch Cable Harness - <b>CUSTOM</b> Vandal Resistant Style Latching Switch Cable Harness - CUSTOM
Brand: FrozenCPU  

The Vandal Resistant Style Latching Switch Cable Harness is used to control any 4-pin molex powered device. Fans, lights and other molex driven devices can be hooked up to this cable and controlled via the Bulgin style latching switch.


Read reviews
Submit a review
$14.99