 |
Aavid Thermalloy Low Profile Chipset Heatsink w/ 3M-8810 Adhesive - 27mm x 27mm x 5mm - Anodized Black
The Passive Aavid Thermalloy Premium Chipset Heat Sink w/ 3M-8810 Adhesive - 27mm x 27mm x 5mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipset...
|
Submit a review
|
$3.00
|
 |
Aavid Thermalloy Northbridge / Southbridge Heatsink - 37mm x 37mm x 8mm - Silver (55mm Hole Spacing)
The Passive Aavid Thermalloy Northbridge / Southbridge Heatsink - 37mm x 37mm x 8mm - Silver is designed to replace Northbridge or Southbridge coolers that utilize a 55mm mounting pattern. This cooler comes with mounting spring loaded pins.
Sold as single heatsink.
Heatsink comes with heat transfer adhesive on the base from the factory.
|
Submit a review
|
$5.99
|
 |
Aavid Thermalloy Northbridge / Southbridge Heatsink - 38mm x 38mm x 10mm - Anodized Black (60mm Hole Spacing)
The Passive Aavid Thermalloy Northbridge / Southbridge Heatsink - 38mm x 38mm x 10mm - Anodized Black is designed to replace Northbridge or Southbridge coolers that utilize a 60mm mounting pattern. This cooler comes with mounting spring loaded pins.
Sold as single heatsink.
Heatsink comes with heat transfer adhesive on the base from the factory.
|
Submit a review
|
$5.99
|
 |
Aavid Thermalloy Northbridge / Southbridge Heatsink - 44mm x 44mm x 12mm - Anodized Black
The Passive Aavid Thermalloy Northbridge / Southbridge Heatsink - 44mm x 44mm x 12mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBr...
|
Submit a review
|
$5.99
|
 |
Aavid Thermalloy Premium Heatsink - 35mm x 35mm x 10mm - Anodized Black
The Passive Aavid Thermalloy Premium Heatsink - 35mm x 35mm x 10mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and integra...
|
Submit a review
|
$3.50
|
 |
Aavid Thermalloy Premium Chipset Heat Sink - 23mm x 23mm x 10mm - Anodized Black
The Aavid Thermalloy Premium Black Heat Sink - 23mm x 23mm x 10mm - Black is designed for circuit board chips but can be used for just about anything. They can be used as singles or stacked side by side for larger chips.
Sold as single heatsink.
Heatsink comes with heat transfer adhesive on the base from the factory.
|
Submit a review
|
$3.00
|
 |
Aavid Thermalloy Premium Heatsink - 33mm x 33mm x 15mm - Anodized Black
The Passive Aavid Thermalloy Premium Heatsink - 33mm x 33mm x 15mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and integrat...
|
Submit a review
|
$3.00
|
 |
Akasa Cool Blue Anodized Univeral Chipset Cooler - 40mm Blue LED Fan (AK-210)
| Brand: Akasa |
|
 |
Cool Blue chipset cooler. Keep your chipset cool in style. The low-noise fan has 3 High-bright blue LED’s and sits on a blue heatsink. The cooler is easily installed using the thermally conductive adhesive transfer tape. The Akasa Cool Blue Univeral Chipset Cooler also features a standard 3-pin connector for motherboard connection.
|
Read reviews
Submit a review
|
$10.99
|
 |
Alpha LPD25-10B Heatsink - 25mm x 25mm x 10mm - Anodized Black
The LPD25-10B Alpha heat sink offers a natural convection thermal resistance rating of 17.8 °C/W within a 25mm square footprint. The elliptically shaped, aerodynamic fins are set in a sparse pattern making it easier for air to efficiently flow through the heat sink, making this cooler an ideal choice for either passively or actively cooling high power LEDs.
Made fr...
|
Submit a review
|
$3.00
|
 |
Chipset Heatsink w/ 3M-8810 Adhesive - 28mm x 28m x 15mm - Anodized Gold
The Passive Low Profile Chipset Heatsink w/ 3M-8810 Adhesive - 28mm x 28m x 15mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge...
|
Submit a review
|
$5.99
|
 |
Chipset Heatsink w/ 3M-8810 Adhesive - 30mm x 30mm x 12mm - Silver
The Passive Chipset Heatsink w/ 3M-8810 Adhesive - 30mm x 30mm x 12mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and integ...
|
Submit a review
|
$3.00
|
 |
Chipset Heatsink w/ 3M-8810 Adhesive - 37mm x 37mm x 24mm - Anodized Black
The Passive Chipset Heatsink w/ 3M-8810 Adhesive - 37mm x 37mm x 24mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: peripheral control chipsets (SouthBridge) and integrated controllers (RAID, SATA). These components do not genera...
|
Submit a review
|
$5.00
|
 |
Chipset Low Profile Heatsink w/ 3M-8810 Adhesive - 28mm x 28mm x 9mm - Anodized Black
The Passive 3M-8810 Chipset Heatsink - 28mm x 28mm x 9mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and integrated control...
|
Submit a review
|
$3.00
|
 |
Elegant Chipset Heatsink - 15mm x 11mm x 25mm - Anodized Blue
The Passive Elegant Chipset Heatsink - 15mm x 11mm x 25mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and integrated contr...
|
Submit a review
|
$3.00
|
 |
Enzotech SLF-1 Forged Copper Northbridge / Southbridge Low-Profile Heatsink
| Brand: Enzotech |
|
|
The Enzotech SLF-1 Forged Copper Northbridge/Southbridge Low-Profile Heatsink features a mirror-finished heatsink, a forged copper pin structure and a very low-profile design at a mere 13.5 mm! Designed with compact motherboards in mind, the low height makes it much easier to mount - and avoids interference with SLI or Crossfire systems. The mirrored-finish ensures ...
|
Read reviews
Submit a review
|
$21.95
|
|
Enzotech SLF-30 Forged Copper Northbridge / Southbridge Low-Profile Heatsink
| Brand: Enzotech |
|
|
The Enzotech SLF-30 Forged Copper Northbridge/Southbridge Low-Profile Heatsink features a mirror-finished heatsink, a forged copper pin structure and a very low-profile design at a mere 13.5 mm! Designed with compact motherboards in mind, the low height makes it much easier to mount - and avoids interference with SLI or Crossfire systems.
This has an even smaller...
|
Submit a review
|
$28.95
|
 |
High Performance Heatsink w/ Thermally Conductive Adhesive - 50mm x 50mm x 15mm - Silver
The Passive Aavid Thermalloy Northbridge / Southbridge Heatsink - 44mm x 44mm x 12mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBr...
|
Submit a review
|
$5.99
|
 |
Low Profile Chipset Heatsink w/ 3M-8810 Adhesive - 38mm x 38m x 10mm - Anodized Black
The Passive Low Profile Chipset Heatsink w/ 3M-8810 Adhesive - 38mm x 38m x 10mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge...
|
Submit a review
|
$4.00
|
 |
Low Profile Chipset Heatsink w/ Thermally Conductive Adhesive - 37mm x 37mm x 8mm - Anodized Green
The Passive Low Profile Chipset Heatsink w/ Thermally Conductive Adhesive - 37mm x 37mm x 8mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets...
|
Submit a review
|
$2.50
|
 |
Premium Thermal Fin Heatsink - 38mm x 38mm x 10mm - Anodized Black
The Passive Premium Thermal Fin Heatsink - 38mm x 38mm x 10mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and integrated co...
|
Submit a review
|
$3.00
|
 |
Thermalright HR-55 Heatpipe Chipset Cooler - SLI / CrossFire Ready
| Brand: Thermalright |
|
|
The Thermalright HR-55 Heatpipe Chipset Cooler is designed for the latest Socket motherboard platforms running SLI or Crossfire video card setups. Using the new Wild Fire fan design, the HR-55 features increased surface area for heat dissipation with any 80mm fan. The cooler also features an improved retention mechanism that provides a sturdier base and better mother...
|
Submit a review
|
$22.50
|
 |
Titan Universal Active Chipset / VGA Copper Heatsink (TTC-CUV1AB(DIY))
| Brand: Titan Technology |
|
|
The Titan Universal Active Chipset / VGA Copper Heatsink is a simple to install universal solution to cool chipsets and VGA cards. The copper base effectively pulls the heat from your components and is dissipated by the 5000 RPM fan. With 3 different mount spacing brackets this cooler is sure to fit your needs. Included is mount spacing brackets for 52mm, 54.8mm, a...
|
Submit a review
|
$14.99
|
 |
Ultra-Thin Server Grade Chipset Heatsink w/ Thermally Conductive Adhesive - 34mm x 34mm x 4mm - Anodized Black
The Passive Ultra-Thin Server Grade Chipset Heat Sink w/ Thermally Conductive Adhesive - 34mm x 34mm x 4mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral con...
|
Submit a review
|
$3.00
|
45966 fans like us!
About Us
Site Map
Shop by Brand
Liquid Cooling
