 |
EK Replacement Motherboard Mosfet Block Thermal Pad (90mm x 15mm) - (680i / 790i / Asus1,2,3,3a / GA X38 / Others)
| Brand: EK Water Blocks |
|
 |
These pads are perfect for replacing the old ones when installing your motherboard Mosfet cooling block. Why use the deformed ones from your stock cooler, start fresh and get good contact!
These are NOT an adhesive by themselves, meant to be used with mounting hardware.
|
Submit a review
|
$3.99
|
 |
EK System Builders Thermal Pad Full Sheet - 305mm x 305mm x 1.0mm
| Brand: EK Water Blocks |
|
|
A full page of thermal pad! Make your own sizes to fit anything you need. The System Builders Thermal Pad Full Sheet starts at 310mm x 310mm (12.2" x 12.2") and is 1.0mm thick. Both sides have a protective plastic that can be peeled once ready to apply.
|
Submit a review
|
$69.95
|
 |
EK Thermal Pad Sheet - 150mm x 155mm x 1mm
| Brand: EK Water Blocks |
|
|
Need more than a single pad but not a full sheet? Quality thermal pads are now available in bulk. This sheet comes 160mm x 155mm in size. (6 1/4" x 6") Both sides have a protective plastic that can be peeled once ready to apply.
|
Submit a review
|
$18.99
|
 |
Fujipoly Premium System Builder Thermal Pad - 1/4 Sheet - 150 x 100 x 1.0 - Thermal Conductivity 6.0 W/mK
A full page of thermal pad! This is the cream of the crop for thermal pads. With a 6.0 watt/mk thermal conductivity these pads will pull heat away from your important components! Make your own sizes to fit anything you need with this full sheet. The Fujipoly System Builder Thermal Pad starts at 150mm x 100mm (5.9" x 3.93") and is 1.0mm thick. Both sides have a pr...
|
Submit a review
|
$16.99
|
 |
Fujipoly Premium System Builder Thermal Pad - Full Sheet - 300 x 200 x 1.0 - Thermal Conductivity 6.0 W/mK
A full page of thermal pad! This is the cream of the crop for thermal pads. With a 6.0 watt/mk thermal conductivity these pads will pull heat away from your important components! Make your own sizes to fit anything you need with this full sheet. The Fujipoly System Builder Thermal Pad starts at 300mm x 200mm (11.8" x 7.87") and is 1.0mm thick. Both sides have a p...
|
Submit a review
|
$59.99
|
 |
Fujipoly Premium Thermal Pad - Mosfet Block - 100 x 15 x 1.0 - Thermal Conductivity 6.0 W/mK
A custom cut piece of thermal pad for mosfet components! These are custom cut to fit your Mosfet Block and are much longer than most mosfet block bases. These can be easily cut to fit and provide the highest performance! This is the cream of the crop for thermal pads. With a 6.0 watt/mk thermal conductivity these pads will pull heat away from your important compon...
|
Submit a review
|
$3.99
|
 |
Fujipoly Premium Thermal Pad - VGA Block - 60 x 50 x 1.0 - Thermal Conductivity 6.0 W/mK
A custom cut piece of thermal pad for your VGA components! These are custom cut to fit your VGA Block. These can be easily cut to fit and provide the highest performance! This is the cream of the crop for thermal pads. With a 6.0 watt/mk thermal conductivity these pads will pull heat away from your important components! Both sides have a protective plastic that c...
|
Submit a review
|
$4.99
|
 |
Koolance VID Cooler Thermal Padding - 2 Sheets 1.0mm & 0.5mm Thick - 110mm x 110mm ( ACC-VID001 )
| Brand: Koolance |
|
|
Uncut thermal padding used in Koolance VID-series water blocks. One 11cm x 11cm (4.3" x 4.3") sheet of both 0.5mm and 1.0mm thick material are included. Each has a protective film on one or both sides that must be removed before use.
|
Submit a review
|
$14.99
|
 |
Phobya Thermal Pad XT 100mm x 100mm x 1.0mm - 7W/mk (1 Piece) (17134)
| Brand: Phobya |
|
|
Phobya's improved thermal pads with 7W/mK are able to match even high-end thermal compounds!
These "XT" thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements.
The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalize...
|
Submit a review
|
$21.99
|
 |
Phobya Thermal Pad XT 120mm x 20mm x 1.0mm - 5W/mk (V-Regs, RAM, Ramplex, Koolance, MIPs, Innovatek) (19053)
| Brand: Phobya |
|
|
These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements.
The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the p...
|
Submit a review
|
$4.99
|
 |
Phobya Thermal Pad XT 120mm x 20mm x 1.0mm - 7W/mk (V-Regs, RAM, Ramplex, Koolance, MIPs, Innovatek) (19100)
| Brand: Phobya |
|
|
Phobya's improved thermal pads with 7W/mK are able to match even high-end thermal compounds!
These "XT" thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements.
The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalize...
|
Submit a review
|
$6.99
|
3443 fans like us!
About Us
Site Map
Shop by Brand
Liquid Cooling
