This cool water reservoir can easily be mounted in your case using the supplied mounting plates. The reservoir is made of aluminum and acrylic glass.

The Innovatek Tank-O-Matic can hold up to 280ml of cooling fluid. The solid plexiglass housing has metal screw caps at both ends. The enclosed mounting plates are fastened with a central screw to the housing to hold the tank firmly in place. Tubing within the tank can be attached at an arbitrary height to allow the tank to be rotated at an angle suitable for installation in your case. The standard Innovatek screw connections are sized for 8mm (5/16") ID x 10mm (3/8") OD tubing.

Weight:	540g (including fittings and mounting hardware)
Size:	(DxH) 50 x ~280 mm
Capacity:	~280ml
Material:	Aluminum (anodized), acrylic glass (Plexi)
Fittings:	Screw connections for 8mm (5/16") ID x 10mm (3/8") OD tubing

08-09-2008
Reviewer: Mason (1)
This reservoir fit perfectly in between the mobo and drive bays on my Gigabyte 3D Aurora chassis, on the inside. Makes for a great outside bay, too. Only problem I had was that the clamps do not hold tight enough on their own--when filled with water, the bay slides through them easily.