Tygon brand tubing is the finest in quality for water cooling tubing available. This 1/2" ID, 5/8" OD model of tubing is specifically formulated to withstand ageing, corrosion and kinking/bending. (wall thickness 1/16" / total wall thickness 1/8")

What makes Tygon brand tubing famous is it's extreme flexibility. Compared to regular PVC tubing, Tygon tubing will not bend at a much greater angle and still maintain 100% flow which makes this tubing simply ideal for the close quarters of a water cooled case.

Each quantity ordered equals 1 foot in length. For example, if a quantity of 3 is ordered, we will send you a 3 foot length.

Don't forget to pickup a Tube Cutter to make your job easier and cuts cleaner!

12-14-2008
Reviewer: Ridl37 (3)
This tubing does kink easily when alone but that''s obvious when you look at its thin wall ultra flexible design. I planned ahead and bought the coil spring sleeves which allow much tighter bends. The ease of slipping this tubing on and off connectors has made reconfiguring my system with koolance compression fittings a snap. I suggest putting some clear lube on the tube where the compression collar turns to keep the tube from twisting with the collar.

02-10-2008
Reviewer: mike28 (6)
Its a high quality tubing for sure. It does have problems with tight bends but if you use the anti kink coils with it I didn''t have any problems with making all my tight bends. It is very flexable and easy to work with, but I''ll be trying the newer 1/2 feser next. Don''t let the reviews of Tygon turn you away. Like the person befor eme said it works with compression fittings as well.

11-26-2007
Reviewer: EnergyFX (1)
As the other reviews stated, yes this hose kinks easily, BUT its saving grace is that it works with compression style 1/2" fittings. 3/4" OD Tygon is much less prone to kinking, but if you are partial to using all compression style fittings then this is what you will need to buy. You will probably need some spiral wrap for getting around tight spots.

03-15-2007
Reviewer: Masa (2)
The 5/8" OD kinks easily and doesn''t bend that well. You''re much better off with 3/4" OD tubing.

02-15-2007
Reviewer: Phizzle (5)
The bends in the picture aren''t as good as the look. This tubing will kink at about 3 3/4in bend. This is no good for a watercooling system. You need tight short bends a lot of the time and this stuff just won''t do it on its own. I you buy it, make sure you get some coolsleeve too, your gonna need it.