This is high quality industrial 172 x 150 mm fan is made for us by Pelko Motors. It features a sturdy aluminum frame to fight against the high torque developed by the fan. This fan moves over twice as much air as the phenomenal 92mm Vantec Tornado High Output Fan and produces less noise! (265.1 CFM to 119 CFM and 54.4 dBA to 56.4 dBA) If you want to reduce you dependency on multiple fans in your system, switch to this fan.

Warning:Due to the size of the impeller, the fan is not able to reduce speed immediately after loss of power and can remain dangerous until its blades finally come to rest. (This may take as long as 10 seconds.)

Note: When using this fan on your case we recommend that you use it to exhaust air and not intake air to avoid damage to your components.

Right Click, Save As Link

Dimensions:	172 x 150 x 51 mm, (6.77 x 5.91 x 2.01 in)
Frame:	Aluminum ADC12
Impeller:	Thermoplastic PBT (GF 15%), UL94-V0
Lead Wire:	UL 1430, AWG 22 / 210 mm, Red (+), Black (-)
Dielectric Strength:	500VAC (1mA/1min) or 600VAC (2 sec.)
Insulation:	> 10M ohm, tested @ 500VDC
Weight:	713g (25.15oz)
Air Flow:	265.1 CFM (7.51 m3/min)
Pressure:	0.51 in H2O (12.84 mmAq)
Fan Speed:	2900 RPM
Voltage:	12 VDC
Range:	7 – 14 VDC
Power:	19.2 Watts
Current:	1.60 Amp.
Bearing Type:	Ball Bearing
Noise Level:	54.4 dBA
Connector:	Bare Leads

10-27-2008
Reviewer: Anonymous
I would seriously recommend you buying this fan if noise is not the issue, this fan has a lot of push! But seriously, unless its a server your trying to cool, this is not the best idea-unless your case has the best airflow possible-i do(intake for the GPU, CPU and all:) Note: I tried asking them if they had a 3speed (SINGLE) switch, and they linked me Lamptron Hummer 5 Port Military Switch :-( I wish they offered a single 3 speed or any speed switch that is easy to just plug in using 4 pin

10-27-2008
Reviewer: Nubbings (1)
I would seriously recommend you buying this fan if noise is not the issue, this fan has a lot of push! But seriously, unless its a server your trying to cool, this is not the best idea-unless your case has the best airflow possible-i do(intake for the GPU, CPU and all:) Note: I tried asking them if they had a 3speed (SINGLE) switch, and they linked me Lamptron Hummer 5 Port Military Switch :-( I wish they offered a single 3 speed or any speed switch that is easy to just plug in using 4 pin

07-26-2008
Reviewer: THEDDLE (2)
Great fan blows lots of air. However terrible high pitch noise when turned up from the start. I tried hooking up to fan controller. Have to turn down so low that it is just a hair from off. When I need the air for gaming it is there. Have to turn headphones up. Even my buddies have noticed the high pitch when talking to them over Vent. Still having heat issues with my dual GTX''s will have to upgrade case. Other downside is no fan connector on wiring. Will have to hard wire in. Still great fan does what it is supposed to. When I build my case I may remove this fan and use it as a exhaust fan to vent out my bathroom. LMAO. Highly recommend using with a controller. If you need lots of air here it is.

10-30-2006
Reviewer: great fan (1)
I bought this about a year and a half ago. i have an open case. and it sits right next too it. This thing is awsome (loud as hell), but awsome...if you have 2 GPU''s, and you dont want to take the time to get a Water or Pelt system...get this... warning though...get the fan grill...i had a little trip to the emergency room because i didnt have a fan grill...and my finger got too close...

09-01-2006
Reviewer: akumu_13 (1)
If only I had found this fan sooner. So many cases that have had deal with mearly adequite cooling. I wonder what kind of damage would be sustained from using it as a intake fan.