|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6||55805 fans like us!|
52 users browsing
My Wish List
Who We Recommend
PrimoChillís Vue was specifically developed for that experienced user looking to create an unrivaled aesthetic in their liquid cooled PC. Itís an environmentally friendly fluid that combats issues typically seen in other watercooling fluids. Vue's exclusive water-based formulation allows it to stay suspended longer allowing longevity and an easy flush to any system. With its unique visual traits, Vue is sure to bring another dimension to any loop.
PLEASE BE SURE TO READ ALL THE WARNINGS BELOW TO AVOID VOIDING YOUR WARRANTY.
PrimoChill has gone to great lengths to make Vue as easy to use as possible, but please keep in mind that Vue is for experienced users looking for that extra aesthetic and requires more attention and maintenance. During the filling of your loop, induction of any air is NOT recommended. Allowing the pump to suck air into the loop or running it dry may cause PrimoChill Vue to break down and fail. Slowly add PrimoChill Vue to your system to make sure you are not adding any additional air into the system. Itís recommended to have direct manual control over the speed/power of your pump when adding PrimoChill Vue to your loop. Run it at a medium-low speed with the ability to turn off the pump quickly if necessary. Cycling your pump on and off during the filling process will help in reducing the amount of air that you allow into the system.
Vue has a HIGH attraction to dyes. It's possible that Vue may leach old dyes out of components that had previous dyed coolants ran through them (radiators in particular). No amount of flushing with water will remove all previous dyes. This may result in Vue changing color slightly. For best results flush your system with PrimoChill System ReBoot prior to using VUE in existing systems that contained dyed coolant.
Continuous circulating of VUE 24/7 will severely decrease lifespan. Please turn off your computer when not in use. Vue should not be moving for more than 8 hours continuously.
Please be advised that the color and texture of Vue may change slightly compared to the fluid in the bottle over time once you put it in your loop. Vue may develop clear areas in the top of the reservoir and tubes as it reacts with metals and chemicals in your loop resulting in a slightly thicker fluid. This will not impact the performance of Vue. Running the pump will return Vue to its original state.
This product is NOT intended to be used in conjunction with any other coolant or additive. Vue contains biological inhibitors so no additional coolant or additives are needed. Adding anything extra could result in adverse effects and will void all support and warranty. Please keep a close eye on the fluid and parts in your loop. Drain and inspect immediately if any sign of growth or corrosion develops. PrimoChill recommends replacing Vue every 4-6 months (or sooner) for best results!
PrimoChill is not responsible for any hardware damage. Use at your own risk.
THE TRUTH BEHIND PRIMOCHILL VUE
Vue is a great product with an incredible appearance but there are some things you should be aware of before using Vue. Most importantly it that it has this great (or not so great) ability to find debris in a system. Once it finds the debris, it likes to stick to it and likes to build up. Jaytwocents had so much success with his Vue because he has taken such good care of his waterblocks as well as the other cooling components. He cleans them out by hand between each loop and tears them apart looking for any issues whether it is oil or whatever other debris may be left behind. That is why it is SO important to have a spotless system when using Vue.
Adding Vue to the system also requires more work than just pouring it in, but a spotless loop is by far the most critical. We will discuss this a little later on.
Will you get build up? Hard to say as we do not know how well your system is maintained and what was ran through the system prior, or what manufacturing residue could have been left over. One thing we have recently determined is that CyroFuel is leaving a residue behind that cannot be cleaned with normal flushing. What else we know is that spotless loops have zero issues running Vue perfectly.
We want you to enjoy Vue and be set up for success so we are providing full disclosure on what we have found.
I want a simple maintenance free loop
WHY IS VUE COOLANT FOR ME?
I'm an Experienced Water Cooler