|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6, Sat 11-4||57257 fans like us!|
106 users browsing
My Wish List
Who We Recommend
The HEATKILLER Rev3.0 CPU sets new standards in performance, quality and ease of installation. The development of new high-end CPU coolers has been consistently focused on the current CPU generation.
A central flow, coupled with a nozzle plate and a very fine Kühlgeometrie give the cooler a excellent cooling performance. The bottom plate can geometrically adapted to the heat spreader and thus provides for an optimal contact to the CPU.Trotz very expensive Kühlgeometrie the flow resistance is extremely low. For the use of quad-processors, the cooler has a plug-distribution plate, the individual CPU cores will flow parallel thereby.
A modular design allows easy opening of the HEATKILLER, a switch to a different mounting system is done at any time and with very little effort. Sold separately, mounts and spare parts guarantee, even after several years, problem-free operation.
The Kühlgeometrie, and the uppers are made of high-purity copper, the mounting and application of polished stainless steel. To prevent tarnishing of the copper, the top is sealed with a special clear lacquer.
Warning: Compression fittings can be used up to 1/2" OD without conflict. Larger sized compression fittings require 45° adapters!
1x HEATKILLER ® CPU Rev3.0 1366 / 2011
1x Mounting material / instructions
Total Reviews: 5 Average Rating:
Reviewer: FadedMaster (14)
What can I say? No need to look any further. Works very well. My temperatures are about 20 degrees cooler (keep in mind that I switched from a Corsair sealed system to a full custom liquid system).
Reviewer: Rukasu (4)
If God Himself couldn''t figure out how to cool His i7, He would turn to this.
Installed on a new i7 930 with a quick and dirty 4.2 overclock. Using Intel burn test and Prime95: Max temp 75C. Idle temp 42C. Temps will probably drop a bit after actually tweaking of the overclock. Overall, an excellent product. Get the back plate as well. It''s worth it.
Best block on the market06-06-2010
Reviewer: kshug (1)
Temps dropped 8 degrees Celsius from Zalman zm-wb5 plus on a I7 920 overclocked to 4.0ghz. Beats my friends d-tec fusion by about 4 degrees. Get the backplate. should be included for the price of the block.
Number 1 water block on the market!04-08-2010
Reviewer: FrozenSEEPEEYOU (1)
Now besides the fact that I broke one of the screws tightening it to much! :( After quickly receiving another screw from FrozenCPU, before water cooled with a P6T motherboard, Intel i7920 CPU (Clocked to 4.0MHz) it ran fully stressed at around a disturbing 95 degrees Celsius!! After the Heatkiller................ a very frozen 55 degrees Celsius!!! So in short get a good cooling system and buy the Heatkiller, trust me it''s the best on the market!!!