A successor to the Liquid Chaos reservoir, the Liquid Fusion reservoir is the inverse alternative. With this reservoir, the coolant flows around the helix in the acrylic cylinder, as opposed to having it flow directly though the helix. The helix is made of high quality fluorescent cast acrylic rod that comes in four different colors. The helix is illuminated beautifully by a powerful 8” (20cm) UV cold cathode that is completely sealed away from the coolant. This cathode can be replaced very easily by ordering a modified cathode through me, should the original cathode go bad after an extended period of time. Each reservoir is custom made to your specification, and if there is a special color that you would like to implement, please feel free to suggest it.
The Liquid Fusion reservoir has as single inlet and outlet located on the bottom of the reservoir. The top has a fill-cap to make filling the system simple as possible. With this reservoir, side ports are available as an option.

This reservoir will disassemble into 5 pieces, the two end caps, the tube, the inner light tube, and the helix core. The helix core, secures onto two pins located on bottom of the lower cap. This keeps the helix from spinning and blocking the inlet and outlet. Both top and bottom are made of high quality Black delrin and thread onto the reservoir tube for maximum sealing and security.

Any type of coolant may be used in this reservoir, as clear, dyed, and UV reactive coolants all look absolutely stunning around the helix.

Each reservoir requires a cathode inverter to power the reservoir cathode. They are available in the options below.

Reservoir Material:	Polycarbonate, Cast Acrylic
Capacity:	Approximately 275mL
Length:	250mm
Tube Diameter:	50mm
Ring Diameter:	59.1mm
Ports:	3 Total 1 - Top 2 - Bottom along with cathode power cable
Included in Box:	Liquid Fusion Reservoir Pair of Clear Mounting Rings Pair of Black Delrin Ice Caps

01-22-2012
Reviewer: Dredknot (12)
This resevior is still amazing. After a week of heavy use still no leaks or any other problems. Updated link to my New computer with 1/2 tubing bought from here. http://www.youtube.com/watch?v=PvV8NdpCPeA&context=C383324eADOEgsToPDskKG47bkls2-mgNH2jfa2VDM

01-15-2012
Reviewer: Dredknot (12)
This thing is AWESOME. Worked perfect out of box no leaks. It is quiet large so make sure you have plenty of room to fit it in your case. Frozen Cpu was Very helpful in my purchase and has very fast shipping. This is a video of my computer with all new cooling setup bought from here. http://www.youtube.com/watch?v=NiBqxjj0-FI&feature=g-upl&context=G20edc78AUAAAAAAAAAA

12-26-2011
Reviewer: GoNuts461 (2)
FYI, first hydro build so take what i say with a grain of salt. Been building PCs since AMD K6 days if that helps. Anyway, i understand the complexity of this reservoir, and the quality craftsmanship is amazing! From a functionality standpoint, the spacing of the lower ports was perfect for 3/8"ID 1/2"OD fittings. My beef is that this res and the blue version both leaked around the main caps when the system was capped off and pressure built. Giving the cap a few 1/8ths turns, it snugged up and the leak moved to a seep. This eventually sealed up once the system had been running for an hour or so. I am not sure how, other than using some low air pressure, this res can be leak tested before you install it over your board and risk drops of death :-) Mine were installed on the exterrior of Lian Li''s T60 Test Bench, photos on FB if Frozen will allow the link. Happy modding! http://www.facebook.com/media/set/?set=a.10100881279286178.3039500.13757459&type=1&l=40d207ca88

03-10-2010
Reviewer: Raw2dogmeat (1)
As if this product isn''t cool enough by itself, the manufacturer (Alex) sent me a free replacement u.v. bulb (I broke the original on accident!) I''m trying to post a link to some pictures of my rig with this installed so everyone can see first hand how cool these reservoirs are!http://www.evga.com/forums/tm.aspx?m=210882