Tygon brand tubing is the finest in quality for water cooling tubing available. This 1/2" ID, 3/4" OD model of tubing is specifically formulated to withstand aging, corrosion and kinking/bending. (wall thickness 1/8" / total wall thickness 1/4")

Until now, many applications for clear flexible tubing were limited due to chemical attack from fluid being transported. Tygon 2475 Ultra Chemical Resistant Tubing broadens the range of usability with its expanded chemical resistance. The tubing is virtually unaffected by acids, bases, ketones, salts and alcohols.

Each quantity ordered equals 1 foot in length. For example, if a quantity of 3 is ordered, we will send you a 3 foot length.

Don't forget to pickup a Tube Cutter to make your job easier and cuts cleaner!

• Resistant to MEK and other highly aggressive chemicals
• Plasticizer-free
• Safer Disposal through incineration
• Smoother inner surface inhibits particulate build-up
• Hydrophobic property reduces absorption of aqueous fluids
• Minimal out gassing from tubing protects sensitive environments

Part #:	ACG00038 1/2" ID, 3/4" OD
Wall Thickness:	1/8"
Minimum Bend Radius:	1 1/2"
Maximum Working Pressure at 73°F (psi):	18
Vacuum Rating, In. of Mercury at 73°F:	29.9

02-24-2013
Reviewer: Leonard (1)
Be warned before buying this tubing, it is unbelievably stiff, and comes horribly bended. Also, for some reason, it''s so tight on the inside as well. All of my 1/2" ID x 3/f" OD fittings were so tight, that the tubing literally slips right off after struggling to get it on, which is a problem anyways because of the tubing being bent from I guess packaging. If you try to unbend it, it kinks and leaves marks as stated by the top comment, because it is so stiff. I will be looking for different tubing, oh and good luck getting a perfect cut with scissors.

01-11-2013
Reviewer: FadedMaster (14)
Definitely sturdy and durable. You''ll need a tubing/PVC cutter to get clean cuts. But be aware that this does not have that great of a bend radius and when it kinks, you will see a mark in the tubing where it kinked.

03-02-2011
Reviewer: flatsixdc (22)
Much stiffer than the Feser tubing. Not sure if that''s good or bad, but I don''t really like it. And it''s a bit cloudy. If you want crystal clear tubing, this isn''t it. And when you cut it, the material kinda chunks--it does not slice cleanly, even with razer-sharp cutters. In fact the "tube cutter" that I bought from FrozenCPU could barely get through it.

12-22-2010
Reviewer: xDiZtUrBeDx (5)
so far I like it a lot looks great is very ridged compared to the stock hose that comes with swiftech cooling system but still makes the bends and doesn''t kink at all! its well worth the money!