Combine the visual effect of a Thermal-Star with the integrated power of the Bitspower thermal probe and this is what you get. A single G 1/4 threaded port plug that can be used on any reservoir or device with a spare G1/4 port that displays your fluid temp on the Thermal-Star.

Available in multiple display colors and optional Lian Li bay covers available! Now your fluid temps can be easily accessed without inline extra connections.

Note: Picture shows matte black temp probe w/ optional sleeving~

Temp Probe Cable Length:	24"+
Power:	4-Pin Molex
Body Dimensions:	47.5 x 28.3 x 16.7 mm
LCD Dimensions:	36.5 x 16.1 mm
Operating Voltage:	5VDC ± 0.2V
Rated Current:	25 mA
Power Input:	0.125 W
Display Range:	-20°C ~ 70°C
Test Range:	-50°C ~ 100°C
Accuracy:	± 1°C
Measure Period:	2 seconds

10-06-2011
Reviewer: nicktlloyd (13)
I put this in a T fitting with a G1/4" extender so the cylinder doesn''t stick up and impede flow. Seems to be pretty accurate. I modded my case (NZXT Tempest) by putting a hole in the top for the screen and it looks great.

09-21-2011
Reviewer: LiNK (10)
Have the censor mount at the end of the loop (after CPU and GFX) and read the current temps. Readable at low angles, but if get close to 180 it shows all 8s, which was to be expected. Would recommend

05-24-2011
Reviewer: Michael Pizzi (1)
This item works out great, for those of you who dont want to install a fan controller and want something to check inline coolant temps this works great. I love the crew at frozencpu to take an idea and make it a reality!