The Thermalright TR TY-140 140mm x 160mm PWM Fan is a large fan that can be used for many applications. It has a standard 120mm fan hole mounting pattern so this fan can be mounted on any standard 120 fan bracket. The fan comes with Enhanced Hyper-Flow Bearing (EHFB) so you are ensured consistent and stable RPM while providing a lifetime of usage. The seven silent torpedo blades give a very quiet and efficient airflow making this a great selection for CPU coolers.
Note: This fans frame is larger than standard 120mm fans, please check proper clearance before purchasing.
Total Reviews: 7
Average Rating: 
self correction about noise level
03-19-2013
Reviewer: panta (20)
i reduce 1 star from original,
when i got new fan i found out it is more then audible over 1000rpm.
so if your fan is near opening vent and the pc sits on your desk, then you may want to restrict it or choose lower RPM if your noise sensitive.
UPDATE: after 1.5 years of ownership.
01-18-2013
Reviewer: panta (20)
after contacting Thermalright
i understand the TY-140 cannot be services & the warranty have passed. (1 year)
how ever they was generous and offered me a new fan at 50% off!
(even though warranty passed)
i keep the 4 starts rating due to short warranty & non serviceable fan hinge.
but, i definitely recommend this fan and ThermalRight generous & fast customer service!
review after 1.5 years of ownership.
01-08-2013
Reviewer: panta (20)
simple yet high quality fan.
air flow :very good for 1300rmp.
noise: preformed flawlessly first year, nearly inaudible at full speed in a quiet room, however..
16 months later it became quite audible above 900rpm, even though it was cleaned.
(NOTE: I''m eXtremely noise sensitive person)
not sure if this noise can be fixed by servicing the fan hinge.
(will update)
Highly Recommended Fan, I would gladly buy it again!
*with the stated noise caveat
great fan for 120mm case holes
07-23-2011
Reviewer: cool n quiet (2)
Moves more air than previous 120mm case fan and stays quiet with 4-pin PWM control. I use it as a VGA cooler connected to my ASUS Sabertooth 990FX MB on the side of my Antec 300 case and it works great!
Great exhaust, good intake
04-22-2011
Reviewer: Sean C (5)
I bought this to put in my CM 690II Advanced in order to make it into a positive pressure cooling setup (to keep dust out). It''s currently taking in air at the bottom of the case, connected to a fan controller running at probably 600RPM. It''s inaudible under the sound of my Radeon 5770 Vapor-X''s fan idling.
You will want a fan controller or an extra fan plug on your motherboard if this fan will be pulling air through a filter, because it gets obnoxiously loud at full speed. If you''re using it as an exhaust fan, though, you can only hear air moving even at full speed.