The Custom Dual Loop Lian Li Classic Series PC-A77F / Black / Liquid Cooled Full Tower Case is pure cooling. Starting with the pump and reservoirs, we used an XSPC Dual Loop ready reservoir that supports MCP350 / MCP355 / Laing DDC pumps. Next we mounted a pair of the MCP355 Swiftech pumps for maximum flow (120gph). To cool your two loops we incorporated a pair of triple XSPC radiators, one per loop, to make sure any hardware you put in front of it is ready to perform. One stand alone loop can be used for your CPU while reserving the second loop for your SLI / Crossfire set-up!

The Lian-Li PC-A77F all aluminum full tower case has an awesome anodized exterior. The Lian-Li PC-A77F is designed for high performance PC computer systems that require maximum cooling, airflow, and convenience. With loads of features that Lian Li is world renown for this chassis is a revamp of the already popular PC-A70.

Both Loops are triple radiator equipped!

Included:
PC-A77F
XSPC Dual Loop Reservoir - DDCBAYTWO
Swiftech MCP355 x 2
XSPC Triple Radiator x 2
Noiseblocker M12-S2 Fans x 6
Black Radiator Grill

Required items that are not included:
CPU Water Block (options below)
Component Waterblocks (second loop, VGA chipset ect)
Tubing / Fittings
(Radiator and Reservoir require 8 total G1/4 Fittings.)
Fluid
(recommended amount: 4 Liters depending on number of blocks and tubing length.)

Majority of 5.25 bays can be used for shorter devices only, a single 5.25" is available for a slim optical.

Lian Li - The Ultimate Craft
"Quality" is always the essence of Lian Li's products since 1998 when Lian Li offered the first all aluminum chassis to the market. Since then, Lian Li exemplifies the same quality standards, ensuring durability and craftsmanship come first. All products are manufactured in Taiwan and distributed to worldwide markets.

In 2010, Lian Li has introduced introduce the unbeatable PC-A77F for the PC gaming enthusiasts, and gaming professionals who want a high quality product with a unique flavor. �The PC-A77F is manufactured in TAIWAN; handcrafted from high quality aluminum and incorporates Lian Li’s finest workmanship which has built up over more than two decade’s worth of experience.

The PC-A77F carries Lian Li’s high standard of Quality requirement. All the sharp edges have been removed for user’s safety. In addition, the external and internal surfaces have hair-line brush anodized aluminum in keeping with Lian Li’s classical style.

LIAN LI - Excellent Design
Lian Li redesigned the internal layout for a better thermal solution, PC-A77F uses large size cooling fans to remove the system heat , fitting two extra 140mm fans on the top faster and quieter as well as keeps the system more stable

The cutting edge tool-less design is an important key feature in 2010 Lian Li cases. Lian Li designer considered end user requirements, like those who need to build systems faster, or swap out components often. The brand new tool-less modules can make Lian Li users’ life much more convenient.

The look of PC-A77F is in minimalism style; users can access the front I/O ports easily. The front panel design is a combination of art and functionality, with the hair line brushed and anodized aluminum touched up this outstanding high-end chassis.

Lian Li Fine Craftmanship Product
The new internal layout has the motherboard on top of the power supply unit, which allows for easier access to the motherboard as well as more room above, thus larger CPU coolers can be used. The power supply unit at the button of the case is cooled with fresh cool air directly from the outside of the case, instead of pre-heated air from within. This will bring down the core temperatures and extend the lifespan of the PSu significantly.

The PC-A77F is a Full-tower case, which is ideal for the latest graphics cards in combination with the best thermal dynamics. All the internal installation can be done without tools, and is easily adjustable to optimize your hardware setup. Especially in the advent of adding in new graphics cards, equipped with 8 PCI slots, can hold three or more graphics cards, supports CrossfireX™ and 3-way SLI™.

The hardware installation with PC-A77F is very easy and simple. The front panel is detachable and they can be removed without tools.

To install motherboard require no tools, use tool-less screw to screw a motherboard on case, easily and quickly.

Superb head room space, ideal for more thermal solution choices.

Silent Performance
Lian Li uses the best “Made in Taiwan” high quality aluminum panel for all Lian Li chassis. The solid main chassis was folded with 1.5mm thick aluminum sheeting to make a more sturdy structure which has less vibration. The removable front panel is joined with specialized plastic kits that prevent the metal parts from touching each other, ultimately reducing noise created by fans and HDD vibration.

The new 5.25” bay tool-less mounting incorporates a mounting bar equipped with rubber padding. After closing the mounting bar, the rubber pad pushes and holds the 5.25” device in position to both secure and absorb vibration from the device.

Lian Li designers spent months to upgrade Lian Li’s HDD cage; the new HDD cage using special Thumb Screws with rubber suspension. no tool required, simply secure the anti-vibration rubber ring to the HDD, and slide the HDD into the cage.

The aluminum PCI tool-less mounting module is equipped with a rubber pad which can hold the graphics card firmly while closing the gap found in the PCI bracket and PCI slot to reduce noise from escaping air and furthermore reduce vibrations.

The Power Supply has rubber pads for both insulation and support. The mounting clip is also aligned with rubber to reduce vibrations but also and also secure the PSU without scratching the painted surface.

Thermal Solution
PC-A77F has fitted a three speed fan controller, user can adjust the fan speed to get the best balance between�silent and cooling.

PC-A77F inputs cold air by the 120mm intake fan x 3, it can be reposition by adjust the HDD cage. There are also vents on the 5.25” bezels, allow cold air to enter the case to cool the system down.

The two 140mm Blue LED fans on the top cover and the 120mm fan at the rear exhaust the hot air out from the system. The fans cover the whole motherboard, and they can remove the heat fast.

The rear 120mm exhaust fan just next to the CPU, it can remove the hot air out fast and silently.

There are vents on the PCI slots, provids extra cooling to graphics card.

The power supply unit is at the bottom of the case. It can draw in cold air directly through the vent below the power supply unit. This cooler, fresh air will keep your PSU components more cool and stable and thus extend the PSU lifecycle.

PC-A77F supports liquid cooling system, the two holes at the rear of the case allows water tubes to pass through, and the rubber cover can protect the tubes away from cutting.

There is an opening on the motherboard tray, allow for user to change the CPU cooler without removing the motherboard.

User Friendly Design
Multi-media port connectors follow international specification standards, with one connector for easy installation.

New USB3.0 ports, e-SATA, Audio supports HD Audio. The dual design is for better compatibility options.

All I/O ports on the top cover, allow for easy access, there is also a dust-free cover to protect these connectors.

All new tool-less design from Lian Li aluminum chassis. To do this required a great many innovative patents to be filed worldwide. The ideas will make installing and maintenance much easier. For example when installing the 5.25” optical drive, just slide the drive into the 5.25” bay, and close the mounting bar to secure the optical drive, as simple as that.

The installation of the hard disk is very easy, and tool-less. install anti-vibration thumb screw on HDD, Slide the hard disk within the cage into the special hard disk rack, closed with the rack's lock.

To install PCI add-on cards require no tools at all. Simply open the aluminum arm of the tool-less PCI add-on card holder, insert the add-on card to the motherboard slots, and close the aluminum arm to hold the add-on card in position. The additional rubber padding on the aluminum arm assists in gripping the card bracket and securing it firmly.

To install PSU require no tools. Simply open the aluminum PSU holder, insert the PSU in position, also can turn PSU's fans up or down to suit your need, then close the aluminum PSU holder.

There is a patented cable management clamp for cables to pass through, allow uesr convenient manage the cables.

The intake fans are aligned with inlet holes on the bezels. These are equipped with air filters to stop the dust and keep the internals dust free and clean.

There are openings on the panel, Lian Li has fitted a protection kit to avoid sharp edge damage user's hand or cut the wires.

There is an air filter at the base of the case to stop dust from entering the case. The filter is washable. The vents are specially designed to retard heat and fire crossover should a short circuit cause sparks and excessive heat within your system. This feature is designed to prevent the problem from spreading outside your case should the unlikely event occur with your components.

Aluminum M/B Thumb Screw, user can easily screwed motherboard without tools.

There is a PCI Bracket allow user to connect USB3.0 cable to Motherboard.

Model:	Model
Case Type:	Full Tower Chassis
Dimensions:	(W) 220mm x (H) 572mm x (D) 590mm
Front bezel Material:	Aluminum
Color:	Black
Side Panel:	Aluminum
Body Material:	Aluminum
Net Weight:	9.2kg
5.25" drive bay (External):	12
3.5" drive bay (External):
3.5" drive bay (Internal):	9 (Use 5.25 x 6 Bays)
Expansion Slot:	8
Motherboard:	E-ATX / ATX / M-ATX /CEB
System Fan (Front):	120mm Blue LED Fan x 3
System Fan (Top):	140mm Blue LED Fan x 2
System Fan (Rear):	120mm Fan x 1
I/O Ports:	USB3.0 x 4 E-SATA x 1 HD+AC97 Audio
Maximum Video Card Size:	365mm
Reservoir - DDCBAYTWO
Fitting Ports:	4 x G1/4"
Pump Ports:	2
Pump Compatibility:	MCP350 MCP355 Laing DDC-1T/1TPlus
Included:	Acrylic Bay res 8 x Pump Mount Screws 4 x Bay Res Mount Screws Pump Cover Plate w/ O-ring Removable Black Face Plate Removable Silver Face Plate 2 x Male G1/4" Plug Fittings 4-Pin 5mm Tailed LED - Blue
Pumps - MCP355
Nominal voltage:	12 V DC
Operating voltage range:	8 to 13.2 VDC
Minimum starting Voltage:	9 VDC
Nominal power (@ 12 V):	18 W
Nominal current (@ 12 V):	1.46 amps
Nominal head (@ 12 V):	20.2 ft (6.1 m)
Nominal discharge (@ 12 V):	~ 120 GPH (454 LPH)
Connection size:	3/8" barbs (10mm)
Maximum pressure:	22 PSI (1.5 BAR)
Temperature range:	Up to 140°F (60°C)
Power connector:	Molex 4 pin
Weight:	7.3 oz (207 gr.)
Swiftech's noise measurement:	30 ~ 32 dBA in a quiet room @ 2' (non lab environment)
Motor type:	Electronically commutated, brushless DC, spherical motor
Pump MTBF:	50,000 Hours (Mean Time Between Failures)
RPM Sensor:	3 pin connector
Radiators - XSPC Triple
Dimensions:	125x58.5x410mm (WxDxH)
Finish:	Black Gloss Finish
Material:	Copper Tubes and Fins
Thread:	"G1/4" Ports
Fans
Type:	Noiseblocker NB-Multiframe M12-S2
Dimensions:	120 x 120 x 25 mm
Speed:	1250 RPM ±10%
Noise at 1 m:	19 db/A
Max. Airflow:	51 CFM 87 m^3/h
Bearing:	NB-NanoSLI®
Voltage Range:	4.5 - 13.8 V DC
Starting Voltage:	4.5 V DC
MTBF at 25°C:	140,000 hrs.
Operating Temp.:	-10°C to +70°C
Storage Temp.:	-30°C to +80°C
Chassis Material:	PBT UL94V-0 GS
Impeller Material:	PC UL94V-2
Vibration Dampening Material:	Silicone Mix
Radiator Grill
Style:	Subject to change black in color
Window
Style:	Custom Bolt-On Full Size