|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6||55805 fans like us!|
37 users browsing
My Wish List
Who We Recommend
An absolute high-end radiator with an exceptional price-performance-ratio. This new Phobya radiator offers not only excellent design and quality of manufacturing, it also provides excellent cooling performance.
The new Phobya radiators of the Xtreme series belong to the absolute high-end heat exchangers. The copper fins are optimized for super-silent fans. The low flow resistance is achieved using parallel coolant channels. This radiator is optimal for slow-spinning fans with a diameter of 180mm and more.
The special feature of this radiator are the removable fan adaptors (only one fan plate included). These faceplates have multiple M3 threads which make the radiator compatible with many different fans and hence cases. The Phobya Xtreme 200 radiator may also be used without a fan, the cooling performance is sufficient for small systems. The passive performance can be improved by completely removing the fan adaptor plates for maximum cooling surface.
The radiator has 4 G1/4" threads integrated to allow use of all common fittings. The included black nickel screw caps can be used to seal the two unused threads.
Version 2 Full Copper
An additional new feature of the now completely black radiator are now the caps in brass black nickel. The sides on this version are mounted with a more complicated procedure which means that they are a bit more expensive but also look just great! More than that the V2 has not only copper fins, but also copper channels and copper chambers only the threads are made of brass. For those who what copper-only watersystems this radiator is the first choice.
Known Case Compatibility
Aplus CS-EL Diablo
Aplus TwinEngine II Color Big-Tower
CM Storm SGC-6000-KWN1-GP Sniper
Cooler Master HAF Tower RC-932-KKN1-GP
Cooler Master RC-840-KKN1-GP ATC
Enermax Phoenix Neo ECA3162
IN WIN Fanqua BS652 Midi-Tower
IN WIN Maelstrom Big Tower
Thermaltake Spedo VI90001N2Z
Thermaltake Element V Tower VL200K1W2Z
Total Reviews: 10 Average Rating:
200mm rad and shroud08-15-2014
Reviewer: Mike (1)
If you buy the shroud and your fan is 30mm, then you have to buy M3-55mm screws somewhere. Good luck finding the adapter plate for a second fan, if You don''t order it with the Rad.
Excellent, minor details.07-23-2013
Reviewer: Ronin (2)
I found this rad overall as excellent, the only two thinks I would complain are: 1) The lower part (where the ports are located) is kinda "bended" lightly, so, if you look at the rad from the side, it is not a straight piece from top to bottom, instead, it is more like a "L" shape. 2) One of the screws that hold the adaptor plate came overtighten, so, I''ll have to replace it.
Awesome Rad, little on the big side tho06-22-2013
Reviewer: exia (1)
Recently picked this up for my Corsair 600T build (well...the second part of it), and it is a sick radiator to throw in the case. However, this latest revision for me did not quite fit the way that I had previously been lead to believe. In order to get it to fit in the front of my 600T, I was forced to do a fair bit of surgery to the dvd cage of my case. A slot had to be cut in order to get this to fit. However, if that sort of modding to your case is not an issue, then this is a great radiator, and makes an awesome addition to any 600T.
...for the front of my 600T06-05-2013
Reviewer: krsboss (1)
I live in Australia and had this radiator delivered from USA as I found it difficult to get a decent comparably sized radiator locally! I am very happy with the radiator however installation in the front of a 600T was not as simple as a previous reviewer made out! The only orientation the radiator will fit (without heavy case modding) is with the threads at the bottom (otherwise the fan grill of the case partially obscures the rad) which can lead to air gaps in your rad :( Also, none of the holes line up with the pre-drilled holes in the case so you will have to be a least a little handy with a drill!
Reviewer: mike (1)
I used this in my HAF-X case in addition to my 360 top mounted rad. Initially I hoped to fit it and the 200x25 bitfenix sceptre in front of the drive cage, no dice. It did fit between the drive cage and my 2 7970s. Cooling an i7 3930k and 2x 7970s the water/cpu temp is sitting at 23C currently and maxes around 41 when pushing the entire setup. The best part, silence.