The Lamptron FC Touch brings smart touch screen functionality to your fingertips for fan control. Control up to 6 channels in either manual or auto of your choice. Each channel can have its own independent automatic parameter in which you can adjust to your own specific needs. Each channel features up to 30w of output.
Pick your readouts in choices of RPM or voltage for one side, and Celsius or Fahrenheit for the other. Fits into a single 5.25 bay of your choice. All presented in a CNC milled faceplate.

• CNC milled front panel
• Clean and streamlined interface
• Streamlined touch functionality to control your fans
• Choose between RPM or Voltages and Celsius or Fahrenheit for readout
• Set the channel in either Automatic or Manual control to control the fans

Faceplate Color:	Black Anodized
Dimension:	148.5mm X 42.5mm X 64.5mm (5.25inch bay)
Screen Dimension:	118mm X 31.5mm
Power Output:	Up to 30W per channel
Control Channels:	6

03-28-2013
Reviewer: cooksta (1)
Construction is pretty solid on this controller. The capacitors look very solid, the PCB itself is well manafactured, with good solder joints and solid connections throughout. The power delivery comes cleanly and effeciently, I''m running two circuits of 3 fans in parallel on two channels and I haven''t experienced any problems thus far running these circuits at 2200RPM. I have a MCP655 pump attached as well, and it controls the RPM quite cleanly. The brushed aluminum is quite a nice touch, it''s matte black and it''s a little shiny. It may stick out a little with matte black towers and it''s for the most part a very subtle difference. The unit itself is sandwiched, the touch screen at the front, a controller in the middle, and finally the main PCB at the back. It''s all detachable, which I found incredibly useful as I made a custom acrylic cover for it to suit my case. The touch screen can be twitchy at times. I''m pretty sure it''s a resistive touchscreen, meaning it uses pressure rather than electrical capacitance from your finger to control. The screen itself when dirty and oily isn''t as affected, it''s still quite easy to navigate. Cleaning it is easy too, most oil and dirt lifts right off rather than being spread around. It''s difficult to try and get your fans to run at a particular percentage, even though I may want 50%, I can usually only get ±5% within that value. Add to that the control for controlling fan speed is very close to the bottom of the front panel, it makes it difficult to control it precisely. It can also be twitchy switching from fan to fan, if I want to switch back to a fan I previously set, the auto mode button is right next to the arrow, meaning that I often put that fan into auto mode trying to switch fans. An annoyance at best, a major frustration point when you''re try to be precise with exact variables. If you want more precise control, it''s probably best to use a stylus. No discernible instructions either, lot''s of fiddling. Took me a couple of days to figure out how to switch from voltage readout to RPM. It got frustrating when I needed a reference point. Otherwise, a solid fan controller for the price.

06-04-2012
Reviewer: Hatesu (1)
Works perfect and best of all it looks amazing in my corsair 800d. Came with fan extensions that were more than long enough to reach fans in this enormous case. Could use more documentation on how to use it but it was simple to figure out. Giving it a 4 because the depth was short and I had to drill holes and remove my screwless mounts to get it mounted but it was worth the effort. It matches my case perfect and looks/works great.

01-05-2012
Reviewer: digitalgrafx (2)
The fan controller is a beauty and looks amazing in my case. Does the job intended to do well. cons: The touch controls do need tweaking because they sometimes took a couple swipes of the finger to work. Also had a few dead pixels. And It does not come with any thermal tape for the sensors...makes them useless. For the amount of money I paid unclude the thermal tape.

11-01-2011
Reviewer: Silent54 (15)
I''ve been using this for almost 4 months in my new build. This thing controls 6 fans and provides for 6 thermal sensors. You can set this up as manual or setup fan speed based on temps. Great illumination and easy to setup. Can switch between f and C and monitor fan speed by either voltage or rpms. There are cons: 1. the device isn''t long enough to fit flush in bay nor is long enough to be stable in the bay without having to use a screw on the none-keyless side of the bay. 2. There isn''t any directions what so ever. I had to Google YouTube for setup directions. 3. No temp senor tape at all. Had purchase after receiving controller.

11-01-2011
Reviewer: Silent54 (15)
I''ve been using this for almost 4 months in my new build. This thing controls 6 fans and provides for 6 thermal sensors. You can set this up as manual or setup fan speed based on temps. Great illumination and easy to setup. Can switch between f and C and monitor fan speed by either voltage or rpms. There are cons: 1. the device isn''t long enough to fit flush in bay nor is long enough to be stable in the bay without having to use a screw on the none-keyless side of the bay. 2. There isn''t any directions what so ever. I had to Google YouTube for setup directions. 3. No temp senor tape at all. Had purchase after receiving controller.

	Custom Computers October 24th, 2010
	www.techreaction.net October 20th, 2010
	www.hardwarecanucks.com October 17th, 2010
	www.overclockers.com October 1st, 2010