The HSPC Tech Station (patent pending) is a fast-access computer case. It"s a hardware workbench that brings PC components within easy reach yet keeping them safe and secure. The Tech Station makes a perfect work station for computer hobbyists, overclockers, frequent upgraders, IT Professionals, PC Shops. For anyone needing frequent and fast access to internal PC components. It has solid non-conductive construction, tool-less storage for all PC components and lots of great features.

What's new: Version 2.0

Now with secure motherboard standoff system, Neoprene top bench surface (nonslip/non-conductive) and detailed assembly guide!

Based on ATX form factor motherboard specifications. It has a surface area of 14x9.5" which keeps the footprint small yet will support hardware for a complete computer system! The motherboard is perfectly secure in this version 2.0. A high friction rubberized standoff system supports the motherboard 1/4" off the bench surface (accommodates CPU cooler back plates and increases air circulation) and positions the motherboard perfectly on the Tech Station using two Nylon guide posts. AGP/PCI cards are securely locked in place with thumbscrews so the motherboard is safe yet available for hands-on work and is easily removed.

The upper shelf is for stacking the drives and power supply. Includes a neoprene mat to make the entire shelf a non-slip and non-conductive work surface! There is plenty of real estate here to hold optical, extra hard disks and floppy drives, and the top shelf protects the motherboard below from any possible impact from above.

Two standard 3.5" hard drives can be easily inserted, protected and cooled by rails suspended under the top shelf. One end of the HDD Rails open to catch air from the 120mm cooling fan. Slide the HDD's in/out on smooth non-conductive acrylic rails.

The AGP/PCI support brace solves the problem of loose motherboard add-in cards, loose cards can damage circuitry. The brace offers universal support for all add-in cards -blocking no cables or connections, and has some lateral flexibility to make adding/removing cards easy. Nylon thumb screws twist into the top of the brace and are positioned at ATX form factor spec locations so the AGP card and six PCI cards can be locked in place. The support brace can also be removed, flipped over and turned to support BTX form factor.

Plugging directly onto the motherboard, The ATX Control Kit takes the place of the computer case power and reset switches, power and hard disk drive activity lights, and system warning speaker so that PC hardware can operate totally independent of a standard computer case.

The Tech Station is made of non-electrically conductive, scratch-resistant, high grade polymers. Metal screws and brackets are not exposed in sensitive areas, the motherboard rests on protective rubber standoffs, the top shelf has a neoprene work mat, and the test bench sits on non-slip thermoplastic rubber feet. No worries of frying your hardware like with a metal bench.

A 120mm 12v DC fan positioned on the left side forcing air over heat sensitive components including Hard Disk Drive(s) mounted under the top shelf.

The height between shelves is 7� offering adequate room for hands to reach in and change components on the motherboard without having to remove the motherboard completely from the test bench. The bench can hold over 150 lbs!

Traditional alternatives would include leaving components installed in the computer case, which is an awkward and cramped environment for accessing hardware, an ill-fitting frame assembly made of conductive metal, or just having parts scattered around an open work area which is dangerous because components are exposed and vulnerable to impact, shorting and electrostatic discharge. And how is the motherboard switched on/off without the PC case? Our test bench and Control switches solve all these problems. Now you can easily configure your hardware exactly how you want it before installing it in your permanent case!

Comes with:
- Two tier work bench
- PCIe/AGP/PCI/ISA card brace with thumb screws
- HDD Rails for storage/cooling for two hard drives
- Secure rubberized motherboard standoff system
- 120mm fan and finger guard
- Neoprene mat for non-slip/non-conductive top bench surface.
- Assembly & usage details
- ATX Control Kit: Mini on/off & reset switches, power & HDD LED's, system speaker

Download Assembly Instruction Guide (PDF)

	XYZComputing
	PimpRig.com
	VirtualHideout.net