Smart Way Controlling of all Fans & Airflow. The Rheosmart 6 Fan Controller is designed to make any existing 3-pin fan automatically regularized by the PWM signal from the Motherboard! With six independent channels at a maximum of 30W/channel, a wide selection of fans can be supported.

The Rheosmart 6 Fan Controller operates in two different modes; when connected to a PWM-enabled motherboard, you can allow the system to auto-adjust fan speed through the motherboard's temperature sensor. When switched onto manual mode by pressing the small button below each knob, you turn that specific channel into manual control mode.

This controller can connect directly to your CPU PWM fan header!

• Smart cooling system
• 6 Channel
• Manual Control
• Max Output 30W per Channel
• PWM Control

Part Number:	PL-RS-6
Main Function:	PWM/Manual Fan Controller
Color:	Black
Material:	Aluminum and Mesh
DC Input:	+12 V (Standard 4 -Pin Connector)
DC Output:	0V - 12 V DC
Max Output:	30W*6
3-Pin Fan Connectors:	6
Fan RPM Knobs:	6
Compatibility:	5.25" Drive bay
Dimensions(W*H*D):	148mm *42 mm * 82mm

05-09-2012
Reviewer: KamikazeRedneck (1)
It works great. My fans will start up fine at about 25-30% of a knob turn so you have a lot of room to make fine adjustments. It works great even though I''m running 4 fans off each channel. One of the previous reviews is correct about the LED fans will dim with the different adjustment of the controller. Overall though no problems and has lasted 6 months with no problems.

03-09-2012
Reviewer: thatferrariguy (5)
Good if you want to switch between automatic control from the motherboard and manual. Not the easiest install if there''a a lot in your case since the fan headers are so close to the front. If you just want auto control, spend less on the splitter cable.

01-15-2012
Reviewer: John (1)
This is one step up from your basic high watt controller, it gives you the option to be lazy and not turn up the speeds manually! Seems to be working well controlling the fans on my radiator too. it''s worth noting that the voltage control is from 0-12. IN manually mode I have to turn the knobs to maybe 60%+ to get fans to start up. This also means it should be able to control lights and such too! That''s tomorrow''s test...

06-19-2011
Reviewer: ForNever (5)
This is an excellent addition to anyone''s system with high RPM fans that don''t want to deal with the constant high db that typically accompanies them. I was a bit disappointed to find the voltage regulator on channel 1 dead on arrival, but this was easily remedied by running channel 2 in parallel to split the load. I''d still recommend this despite my bad luck.

www.3dgameman.com January 20th, 2011