The new SmartMotion universal water block is a true all-rounder. It is suitable for all common Mainboard – Northbridge and Southbridge- chips as well as NVIDIA® and ATI® GPU chips*.
Additionally the water block can also be used on the video-chip on NVIDIA graphics cards or other special solutions.

This is made possible by the very flexible mounting system with pivoting mounting brackets. Should that not be enough, two additional mounting brackets are included to cover all mounting needs.

*The compatible hole spacings and pivoting radiuses can be seen in the PDF document.

The best part: For replacing the brackets the water block doesn’t have to be disassembled, only a decorative plate has to be removed. For one-piece brackets a separate decorative plate is included. Should additional brackets be needed in the future, they can simply be ordered without having to purchase a completely new water block.

The performance is also truly amazing: The milled cooling structure in the pure copper cooling plate promises great cooling performance with high flow rates of 5 liters per minute – plenty for all high-flow systems.
The spacing between the G1/4” threads is 24mm from hole center to hole center, plenty for fittings with a large outer diameter.

Installation Instructions

• Universal chipset and GPU water block
• Top plate made from sturdy POM
• E-CU copper cooling plate with milled cooling fins
• Mounting brackets made from 3mm thick aluminum with aluminum decorative faceplate

WxLxH:	35x40x15mm (with screw head 16,65mm)
Flow rate:	5 liters per minute
Connection threads:	G ¼"
Weight:	46g
Included:	Smart Motion Block Screw Kit Faceplate 2 x mounting bracket thermal compound

08-11-2011
Reviewer: ()
One of the threads leaks for me every time. Even used plumbing tape and it still leaked. Been doing liquid cooling for 6 years now and the old thermaltake did better then this. DO not buy this for your southbridge if you plan to use a graphics card becaus this thing is thick and wont let a decent card fit with it in the case, i moved mine down to the lower connection to get it to work with this block. Not to mention that the mounting bolts stick up about 4 inches, even if you used it on a graphics card and not a south bridge it will take up alot of space. Faulty on arrival, will go back.