|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6, Sat 11-4||55805 fans like us!|
100 users browsing
My Wish List
Who We Recommend
Easily combine Koolance's compact high pressure pumps into dual or serial/redundant loops! RP-401X2 is a single 5.25" bay reservoir designed for one or two Koolance PMP-400 pumps (not included). Using a convenient bottom plug, the front reservoirs can be separated or combined without disassembling the unit. Top fill ports are available for each reservoir.
Machined from a solid piece of acetal for maximum reliability, the RP-401X2 has a thick acrylic window, front aluminum bezel, and stainless steel bottom covers. Two sets of G 1/4 BSP threaded inlet and outlets appear on the back, designated "P1" and "P2" for each pump. If one pump is used, an acetal blocker is included to occupy the second pump location.
Total Reviews: 1 Average Rating:
High Quality and Compact08-22-2011
Reviewer: eduncan911 (7)
The review over at Martin''s Lab is what convienced me to go with this. And I am NOT disappointed! Reading other reviews here at Frozencpu, others tend to have leaks over time due to the cheap acrylic boxing and covers. This unit uses a pressure plate to distribute the laod properly, one the single piece of acrylic/plexiglass for the front windows. Else, it''s a work of metal art! I purchase this because of my extremely limited case options. Then 4x 5.25" bays are split 50/50 with a sheet of metal (thank you Dell, :P). So, my options are limited for a 2-bay unit cause I have modified the lower drive bay to clear the radiators (plural), and the upper bay houses a blu-ray. So, that pretty much means I either saw off the sheet metal with precision, or I go with a single 5.25" unit. NOTE: What no one mentions ANYWHER about this unit is the use of Compresison Fittings will not clear either the upper or lower portions of the unit. So, for example, you mount this in the bottom, or top of your drive bays with compression fittings, then you won''t be able to remove it to use the fill ports! Wish I knew that ahead of time, as it would have saved me the $24 in compression fittings. :( I am having to use barbs for it now. Also note, you want to leave plenty of extra tubing connected to the in(s) and out(s), so you have room to maintain the fluid levels. All in all, these do not warrant a -1, so this gets a full 5 stars in my book. I am using it with matching Serial kit with 2x Swiftech MCP35X pumps in perfect harmony with my Dell ESA controller (was for the OEM PWM fans, but with a Y-splitter for PWM, this is working perfectly for two pumps in low speed generating a nice flow rate to match my radiators).