|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6, Sat 11-4||55805 fans like us!|
36 users browsing
My Wish List
Who We Recommend
Combining the power of a PSU molex connection with the versatility of a PWM motherboard connection the Akasa AK-CBFA03-45 is a unique product furthering the cause of quiet efficient computing.
Supporting five PWM fans from a single motherboard header makes this the ultimate fan splitter for today’s low noise performance systems. Case fans and watercooling radiator fans can now benefit from smart and precise PWM control alongside the CPU fan. Utilizing the intelligence of PWM for three fans enables multi fan connection and usage of more powerful fans while allowing their speed to be synchronized with CPU load. RPM feedback for the motherboard is provided from a connector marked CPU fan.
Note: Picture shown with factory black / black cable sleeve that can be changed in options below!
Total Reviews: 5 Average Rating:
Use the same model fans for best results11-20-2014
Reviewer: Matt (2)
Works great. Allowed me to simplify the fan wiring to my external radiators/fans significantly. If you plug different models of fan into it they will all still run off the PWM signal, but the RPM that is given will only be accurate for the one fan. And to the guy angry about it being a dead-end molex: A pass through on something like this is a fire hazard. People would daisy-chain them together with high watt fans and melt the standard 18g molex wires.
splitter throws away 4pin plug07-26-2013
Reviewer: Bryan (2)
for a few more dimes, they could have wired it with a pass thru connector. pissed that it wastes a 4pin plug.
Best automatic fan controller03-09-2012
Reviewer: thatferrariguy (5)
Great product. Lets motherboard control speed of five fans. Cable length is plenty long for large cases. Why have a manual fan controller when you don''t need it? Having all my case fans at full speed didn''t change my temps at all, so just let this baby slow them down automatically!
Reviewer: jns (22)
used this for 9 pwm fans and a pwm pump. all work perfectly. connected one to my graphics card and one to my cpu 4-pin. i also tried the case fan 4-pin and it worked perfectly. not sure if other reviewer''s MB has PWM on that port.
Reviewer: frozenreads (1)
Allowed me to control all 9 fans via pwm, only issue I had was it would not work with my Case pwm header (ran fans at full speed and no pwm) only my Cpu Pwm fan header so had to daisy chain two of these together and run all 9 fans off the cpu header. This worked perfectly!