The DEMCiflex Antec 900 Magnetic Dust / Fan Filter Set is a 4 piece set of the highly rated DEMCiflex filters custom made to fit the Antec 900. Filters are included for the front fan, both top fans, side fan, as well as the bottom fan. This is the perfect solution to keeping dust out of your Antec 900, and does this with style!

DEMCiflex Computer Air Filter is the easiest of all Computer Air Filters to use. No need for any skills. No Glue, No Screws, No Tools and No Hassles. All you have to do is to locate your computer's air intake vents. Use a sheet of paper to see if any particular fan draws air into the case or blows it out. All inlet fans and un-fanned openings can be protected by DEMCiflex.

These filter are magnetic and will attach themselves to the chassis assembly itself.

Black Border / Black Mesh

To maximize the benefits of DEMCiflex filters please refer to their page on Positive Pressure .

Software Download

• Super Fine Medical Grade Mesh in Black
• No Glue, No Screws, No Tools and No Hassles
• Easy Cleaning

12-07-2012
Reviewer: Zeke (2)
Zeke again - I''ve had these on my machine for about 4 months now and I have to say they do a pretty good job of eliminating dirt and dust inside the Antec 900 case. I''ve found that a shot of "Endust" improves their filtering ability (don''t apply "Endust" to the filters while they are installed). I installed the big octagon shaped filter on the top of the machine just to see what it would pick up from exhaust air and am happy to report that that filter has remained clean and the inside of the case and components are still very clean. The small square filter which is intended for the exhaust fan on the back of the machine is of absolutely no value because that fan port has a protruding grill and the filter just can''t cover the opening. In fact, the magnetic edge cannot contact enough metal surface to even stick - it will just fall off. In all I have to admit the filter set works better than I my initial assessment gave it credit for and I''m amending my rating to a "3". I''m still knocking off two points for the lousy fit and high cost. They could have done better.

08-15-2012
Reviewer: Zeke (2)
The triangular filter for the side panel fits perfectly. The long rectangular filter is not the correct length for the two ducted fans on the front of the case and must be modified. The smaller rectangular filter for the back of the case and the octagon shaped filter for the top of the case are worthless as these two fans extract air from the case rather than pull air in. The magnetic mounting is a great idea, the mesh is very fine and should stop a lot of dirt and they are washable (great!) Too bad the value of the set is so limited due to poor fit on the case front and the two worthless filters. My recommendation is that you look at alternatives to filter your Antec 900 case and not buy this set. It is not a good value.