|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6, Sat 11-4||56340 fans like us!|
235 users browsing
My Wish List
Who We Recommend
The XSPC RayStorm High Performance Acetal CPU Liquid Cooling Block is a performance based CPU liquid cooling block for Intel's LGA Series Socket motherboards. With G1/4 threads and specifically designed for multi-core CPU's this block is a great upgrade! Compatible with larger compression fittings (1/2 x 3/4 compatible) you can install this into any existing build or start of a new system with a top of the line block.
The Raystorm has support for 4 x 3mm LEDs making color customization easy.
The RayStorm tested an incredibly low restriction rate compared to other top contenders and shouldn't be taken lightly. This block is a top performer and shows up admirably in the thermal department. Combining these together gives a great block at an affordable price!
The Raystorm Intel Block comes with LGA 2011 Fixing Set stock now.
LGA 2011 READY!!
The instructions on swapping hardware is listed Here
Total Reviews: 12 Average Rating:
Reviewer: negative_codezZ (1)
So, I started off by putting in my compression fittings, and to my surprise, the right hole what threaded a bit inclined, so one side of the fitting goes down more than the other, and that side is now leaking... The fitting is ULTRA tight, and will not go more, so no, it is not too loose.
Great cheap CPU cooler02-18-2014
Reviewer: DoItLive (4)
Bought this to use in my brand new loop for 60$ and it beats the socks of my H100i. I understand there in different leagues but this is great for any water loop. Keeps my i7 3820 (4.2GHz) around 26c idle and 51c load.
Reviewer: NoobWcer (3)
First water loop install went well block went in easy. Base had a scratch on it so minus a point. Looks sweet though and fits monsoon 1/2x3/4 compressions just enough just use some hot water on tubes.
Cools my 3930k nicely12-29-2012
Reviewer: hkparker (10)
I put this on my 3930k and it does a great job, I have a casual overclock of 4.3GHz and it stays around 28-32C on idle. Stock at 3.2 it runs at around 26-28C idle. I clipped off the LEDs it came with and soldered on some red ones, looks awesome.
great block especially with kit08-17-2012
Reviewer: Sweetgrill (4)
I got this block with the rx360 d5 kit and it is awesome (i guess this kit isn''t available anymore?) my cpu idles at 28 degrees and at 4.8 with 1.392 volts it stays under 80 at full load prime 95 10+ hours. Frozencpu shipped fast and the kit was easy to assemble