Optimize your system with the most ridiculous radiator for performance! This beast will make sure all your cooling needs are completed with one radiator! These will accept either three 120mm or three 140mm.

A new super radiator with removable sides! The fins and water channels consist of high-grade copper (e-Cu). The water chambers consist of a brass alloy. The layer of the black paint remains very thin, thus optimizing the heat-air transfer.

Note: Requires 1.2 liters of coolant for the radiator. Please plan accordingly.

EXTREME PERFORMANCE

• The newly developed technology and patented design brings you double the cooling power to your system. Better materials, the newest technology and a cool design prove to be an outstanding product.

NOISELESS - SILENT OPERATION

• By using larger spacing between the copper fins the air flow rate is increased improving heat transfer. This allow allows the use or fans at a lower speed. The lower the speed, the lower the noise level.

HIGH-FLOW OPTIMIZED

• The radiators are especially designed to run with a High Flow system configuration. High Flow Systems are recommended to maximize your heat dissipation.

MAXIMUM SYSTEM COMPATIBILITY

• The radiator inlet and outlet ports are G1/4” BSPP threaded allowing multiple fitting options.

HEAT TRANSMISSION

• The water channels and fins are made out of pure copper allowing for maximum transfer of heat out of the water.

INSTALLATION - EASY OF USE

• Enough screws are provided to install the radiator properly. The radiator position (vertical / horizontal) will not effect the cooling performance.

ENERGY EFFICIENT

• Due to the ability of using low speed fans, and less water resistance for the pump, the operating system reduces energy consumption.

PATENTED DESIGN

• This new designed radiator gives the opportunity to use inlet and outlet port from both sides and opens new ideas for installation. Now it is possible to use either 140mm or 120mm fans.

Dimensions:	18.74" x 5.85" x 4.10" LxWxD (476 x148.6 x104.2mm)
Materials:	Copper Water Channels and Fins Brass Water Chambers
Ports:	4 x G1/4
140mm Fan Spacing:	15mm
120mm Fan Spacing:	35mm
Mounting Screw Thread:	M4
Included:	Monsta Rad Extra Bleed Valve Screw 12 x M4 10mm Screws 12 x M4 30mm Screws

01-05-2013
Reviewer: Anonymous
This thing could cool a nuclear reactor. Previously, my video card idled at 35C; now, it reaches 30C only under full load. The only downside to this radiator is trying to find a chassis wide enough to squeeze this big thing into.

12-28-2012
Reviewer: wouldntuliketoknow (15)
I just couldn''t resist this thing. It is HUGE. Really. I thought my Alphacool Monsta was big, but this is even bigger. Not just bigger, but longer. It came in a really long box as well. I can''t wait to put this insanely large radiator into my loop to see a huge drop in temperatures. Admit it. You wish yours was as big as mine. -Sam