|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6, Sat 11-4||45976 fans like us!|
147 users browsing
My Wish List
Who We Recommend
The HEATKILLER Rev3.0 CPU sets new standards in performance, quality and ease of installation. The development of new high-end CPU coolers has been consistently focused on the current CPU generation.
A central flow, coupled with a nozzle plate and a very fine Kühlgeometrie give the cooler a excellent cooling performance. The bottom plate can geometrically adapted to the heat spreader and thus provides for an optimal contact to the CPU.Trotz very expensive Kühlgeometrie the flow resistance is extremely low. For the use of quad-processors, the cooler has a plug-distribution plate, the individual CPU cores will flow parallel thereby.
A modular design allows easy opening of the HEATKILLER, a switch to a different mounting system is done at any time and with very little effort. Sold separately, mounts and spare parts guarantee, even after several years, problem-free operation.
The Kühlgeometrie, and the uppers are made of high-purity copper, the mounting and application of polished stainless steel. To prevent tarnishing of the copper, the top is sealed with a special clear lacquer.
Warning: Compression fittings can be used up to 1/2" OD without conflict. Larger sized compression fittings require 45° adapters!
Note: Some secondary pictures show original version for illustration and size representation.
1x HEATKILLER ® CPU Rev3.0 AMD
1x Mounting material / instructions
Total Reviews: 1 Average Rating:
Reviewer: GoNuts461 (2)
FYI, first hydro build so take what i say with a grain of salt. Been building PCs since AMD K6 days if that helps. Anyway, this block fit without issue on my new AM3+ board, looks like AMD has not changed the cooling reference design in a few years! The block is heavy, seems like quality construction, ports are too close though. I used some 3/8”ID, 1/2”OD from Bitspower, and the knurling touched as I tightened the fittings to the block. Other than that, the included hardware worked great, very tight fit, temps on my FX-8150 are 9-C idle, but that''s also at 1.7ghz or the lowest underclock they idle at. At 4.6ghz, I am only 45-C. (CPU Only loop) If Frozen allows, I have a link to my FB gallery for viewing. Happy Modding! http://www.facebook.com/media/set/?set=a.10100881279286178.3039500.13757459&type=1&l=40d207ca88