Evolve your system to the next level with the new FrozenQ Fusion Dual Bay reservoir. The Fusion Dual Bay features a solid CNC milled body with a fluorescent acrylic helical fixture for a unique visual effect. The internal helix is illuminated with the pre-installed UV cathode, which must be hooked up to a cathode inverter (sold separately). The UV cathode is compatible with any standard lighting inverter which you may already have in your rig. All parts of the reservoir are machined and fabricated right here in our own shop.

The Fusion Dual Bay reservoir has 3 rear G1/4" ports and 1 top G1/4" port for filling. Each reservoir comes with two fill plugs to close up whichever ports your choose not to use.

One of the biggest features to be integrated into the Fusion Dual Bay design is the modular pump mount system. Rather than having to purchase a bay reservoir with an integrated pump mount that only works with one style of pump, you can choose to purchase a special pump mount for a MCP355/DDC pump, a D5 pump, or choose to not integrate a pump at all. It's your choice!

Pump top sold separately.
(Available in D5 or DDC/355)

Material:	Black Acetal or Clear Cast Acrylic
Dimensions:	5.75"x3.31"x2.25"
Form:	Dual 5.25" Bay
Ports:	4 G1/4"
Included Items:	1x Fusion Bay Reservoir 2x G1/4" Fill Plugs 4" UV Cathode Bulb Required Mounting Hardware

04-07-2013
Reviewer: Att1cus (3)
Not sure why others had bad experiences - perhaps inexperience - but mine worked like a charm right out of the box. If you''re on the fence on this one, trust FrozenQ.

04-06-2013
Reviewer: Att1cus (3)
Not sure why others had issues with this reservoir, but mine worked great right from the beginning. Only thing is I wish it could have been more green - it come off a little yellow-ish compared to my internal lighting on my case. Make sure you use some good compression fittings and you can''t go wrong here.

11-13-2012
Reviewer: bernardjclark (1)
I think the answer has to be "leak". And this baby leaks. From the front, from the sides, from everwhere. I''ve had a couple of FrozenQ products now, and they''ve all either leaked from the start or after a short while. They look fantastic, but my advice would be to put them in your case and leave them empty. They''re not so much a reservoir as they are a seive.

09-03-2012
Reviewer: Ahzahail (1)
I have 2 of these purchased from frozen q website BOTH started leaking from the part where cathode connects on the right side of the res. I sent both back to be repaired. 3 months later still no reservoir. When the 2nd started leaking I decided not to even send it back it will just leak again. I have had 3 total and ALL leaked :( I really wish they were good because they look so awesome, but I have expensive parts and I cannot afford to keep putting a part in that leaks.