Following the success of our Spectre™ Fan Series, SpectrePro™ ups the ante with an all-new design and enhanced performance. The high pressure and CFM design produces wicked cooling and is also perfect for watercoolingsetups. Its dual ring construction not only looks great, but also helps to dampen vibrations that cause unnecessary noise. Reinforced fan blades prevent warping at high RPM levels, while focused airflow ensures cool air can reach all of your installed components. With FDB technology for low noise and long life, availability inboth LED and non-LED varieties, and on-the-fly light switching, SpectrePro is the new gold standard in performance case fans.

High Pressure/CFM Design
Engineered for maximum pressure and airflow, Spectre Pro LED delivers a torrent of air that will keep your system cool even when the action heats up. Performance freaks and water cooling enthusiasts are going to love Spectre Pro.



Dual Frame Construction
Using a dual frame construction, Spectre Pro LED fans not only offer aggressive looks, but also vibration dampening properties, helping to keep noise levels in check. In short, our Spectre Pro LED Fan Series looks different because it is.



Reinforced Fan Blades
High rotation speeds can actually warp fan blades while in motion, resulting in more turbulence and noise. Spectre Pro LED features reinforced fan blades that resist warping even when spinning at high speeds for maximum cooling performance.



Focused Airflow
All the airflow in the world won't do you any good if it can't reach your system's hotspots. The special curved design of Spectre Pro LED fan blades and cage directs airflow in a focused column, minimizing diffusion and allowing cool air to reach your components.



Silent Operation and Long Life
Like our Spectre™ LED Silent Fan Series, our Spectre Pro LED features the very same fluid dynamic bearing technology for minimum noise and maximum operating life.



Multiple Colors Available
No two setups are alike, which is why Spectre Pro LED comes in a variety of LED colors. Spectre Pro LED's inner ring is also color matched to the LED color for a unique look.



On-the-Fly Light Switching
Spectre Pro LED borrows the on-the-fly light switching technology from our original Spectre™ LED Series, which allows you to turn the fan lights on and off with the push of a button using compatible BitFenix chassis and accessories.



Excellent Extras
Included with each Spectre Pro LED Fan are some thoughtful extras that help you keep noise levels as low as possible. Four Anti-Vibration Rivets help further deaden noise-making vibrations, and for even more noise control, install the included Low-Noise 7V Adapter. Get more with Spectre Pro LED.

Dimensions (mm):	230x200x30mm
Current (A):	0.41A ±10%
Speed (RPM):	900 RPM ±10%
Air Flow (CFM):	156.27 CFM ±10%
Air Pressure (mmH2O):	1.81 mmH2O
Noise (dB-A):	25.6 dB(A)

06-16-2013
Reviewer: chemical_death (1)
Overall a great fan. Came with screws & power cables, but there weren''t any Anti-Vibration Rivets. Even though the description & box says it''s included. This has happened before with small parts/accessories I''ve ordered. Oh well. Great fan though.

01-29-2012
Reviewer: profan1 (1)
i have a haf x case and installed 4 230mm30 fans in my case, 2 blue in top these fans i modded to fit what i had to mod was the outside of the frame to match frame of the 200mm, also under each hold down screw i added 3 thin nylon washer as spacers to give the blade some clearance(see bitfenix.com forums under tech talk headline haf x sadface)youll no why. the side fan is white 230mm30 and i needed to put the same nylon washers under these bolt mounts to space the fan case out of the square indention that the 200coolermaster fan sat down in, spacing was 3/16th inch total on this. the front fan was red 230mm30 and this fan was bolt up no altercations needed.checked rpm on all fans and they spin 900 to 930 rpm just as specs say. also check air flow on all the orginal coolermaster fans versus these and best i can tell they seem to flow air about 40 percent more flow really feels like twice as much. i cant hardly even hear them running at all with twice the are flow!!! bitfenix gets an A++ on these fans in my book, 900 rpm, 156cfm, no noise, fluid dynamic bearing for long life, theres no 200 or 230 fan out there that can compare to the all around performance of these! and the anonymous review before this one was me trying to get anwsers before i purchased these. oh yea the 200mm fans should work in top with no modding but make sure you space it for blade clearance with thin nylon washers!!! I WENT WITH 230 AND MOD FRAME FOR MAX AIRFLOW

01-09-2012
Reviewer: Anonymous
bitfenix says this fan has 156 cfm of air that should be about 45 percent more than cm megaflow which is a lot 156 to 110. is it a lot or just barly more than megaflow and do you have means of noing if it spins at 900rpm thanks

01-06-2012
Reviewer: Sazuzaki (14)
Silent,about same air flow as CM Megaflow and good thing bout this is that you can plug the LED in into a toggle switch so that you can turn the LED lights on or off in this fan. only complaint is that this thing doesn''t have the same screw holes as the fan from the HAF case so installing this to an HAF case requires removal of the top panel and the side panes of front panel to screw this thing in place... so plan ahead if you are installing this to an HAF case.