The FrozenCPU development team has introduced a sleek new design that keeps liquid cooling simple and yet still high end performance based. The SilverStone Temjin TJ09 was the perfect platform to use and we integrated a full plug and play liquid cooling system with two completely independent loops.

We started with a Black Ice GT Stealth 240 Radiator - Black and utilized the optional factory mounting bracket RadSupport09 to fit this rad up in the top portion of the chassis. We paired the radiator with a couple Bitfenix 120mm fans with their good static pressure to keep the rad cool.

We followed that up with a second Black Ice rad along the HDD rack using an XSPC radiator stand and some more Bitfenix fans. We used the same fans but beefed the rad up for people using mulitple GPUs. As always more surface area of radiator is the key!

For the CPU block we just had to use the new Swiftech Apogee HD block as it is LGA 2011 ready and is at the top of the food chain performance wise. Couple this block with Bitspower compression fittings in all black with the most UV reactive tubing in the business, the XSPC, and you have a very sleek looking set-up. Not only can this build turn heads but also can handle all your cooling needs with room to expand!

We next took a pair of Phobya UV LED strips and hardwired them to a front panel illuminated switch along with tailed LEDs for the front Bay reservoir in matching colors! This gives a great glow and makes the UV reactive tubing explode with color!

The SilverStone Temjin TJ09 Tower Case is the first SilverStone chassis designed with graphics card cooling as one of the priorities. To meet this challenge, a brand new mid-section air duct was created to bypass the hard drive cage, allowing the strategically placed 120mm to draw cool air from outside of the chassis and blow it directly onto the expansion slot area. CPU and hard drives are also cooled exclusively by 120mm fans to maximize airflow while reducing noise. Covered in styling reminiscent of beautiful chassis of years past, the TJ 09' s advanced structure is second in stiffness only to the unibody designed TJ07. If you have been waiting for a chassis with plenty of technical and aesthetic excellence worthy of an upgrade, then the TJ09 is the one.

Note The default color scheme in the options below is Blue (Pictures denote Green), these can be changed to your liking.

• Full Size Bolt-On Window (Custom Installed)
• Dual Loop Liquid Cooling For Optimal Performance
• Premium all-aluminum chassis for extended ATX, ATX, SSI motherboards
• 120mm fan only design for ultimate performance & quietness
• Unprecedented air duct dedicated for graphics card cooling
• Advanced structural engineering with superior chassis stiffness
• User friendly layout with multiple tool-less access
• Classic SilverStone styling and finish

Liquid Cooling
Radiator
Radiator:	Black Ice GT Stealth 240 Radiator - Black
Radiator Dimensions:	133mm wide x 277mm tall x 29.6mm thick
Fan
Dimensions (mm):	120x120x25mm
Current (A):	0.18A ±10%
Speed (RPM):	1200 RPM ±10%
Air Flow (CFM):	56.22 CFM ±10%
Air Pressure (mmH2O):	1.24 mmH2O
Noise (dB-A):	18.9 dB(A)
Air Pressure:	1.64 mmH2O
Material:	PBT Plastic
Bearing Type:	Fluid Dynamic Bearings (FDB)
Voltage:	12 V DC
Reservoir
Reservoir:	DDC Dual Pump / Dual Split Reservoir
Fitting Ports:	4 x G1/4"
Pump Ports:	2
Thread:	G1/4"
Pump
Style:	Swiftech MCP355™ 12v Water Pump
Pump:	Nominal voltage
Operating voltage range:	8 to 13.2 VDC
Minimum starting Voltage:	9 VDC
Nominal power (@ 12 V):	18 W
Nominal current (@ 12 V):	1.46 amps
Nominal head (@ 12 V):	20.2 ft (6.1 m)
Nominal discharge (@ 12 V):	~ 120 GPH (454 LPH)
Connection size:	3/8" barbs (10mm)
Maximum pressure:	22 PSI (1.5 BAR)
Temperature range:	Up to 140°F (60°C)
Power connector:	Molex 4 pin
Weight:	7.3 oz (207 gr.)
Swiftech's noise measurement:	30 ~ 32 dBA in a quiet room @ 2'
(non lab environment):
Motor type:	Electronically commutated, brushless DC, spherical motor
Pump MTBF:	50,000 Hours
(Mean Time Between Failures):
RPM Sensor:	3 pin connector
Fittings / Tubing
Fittings:	Bitspower 1/2" x 3/4" Compression
Tubing:	XSPC 1/2" x 3/4"
Chassis
Material:	5.0mm aluminum front panel, 2.0mm aluminum body
Motherboard:	SSI Extended ATX ATX Micro ATX
Exposed Drive Bays:	5.25” x 4 3.5” x 1
Internal Drive Bays:	3.5” x 6
Cooling System:	Top - 2 x 120mm fan slots Rear - 1 x 120mm exhaust fan, 1200rpm, 21dBA Mid-section - 1 x 120mm intake fan, 1200rpm, 21dBA Front/HDD area - 1 x 120mm fan slot
Expansion Slot:	7
Front I/O Port:	USB2.0 x 2 IEEE1394 x 1 Audio x 1 MIC x 1
Power Supply:	1 x Optional standard PS2 (ATX) or 1 x Redundant PS2
Net Weight:	11 kg
Dimension:	210 mm (W) x 525 mm (H) x 605 mm (D)