|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6||55805 fans like us!|
54 users browsing
My Wish List
Who We Recommend
The airplex modularity system is a fully modular radiator system for water cooling systems. The design and functionality of these shows the expertise and know-how of the ten year history of Aqua Computer. the system is based on a disk pack with 21 copper pipes from the factory and pressed stainless steel flanges. On both sides of the plate pack are Delrin terminals that seal against the stainless steel flanges and are bolted to these.
The Delrin terminals are recessed for the connecting thread and have a round pocket. In this case, a connection adapter can be connected to two radiators mounted without the hassle of using hose connections to directly connect the radiators. Having determined the orientation of the radiators with each other, the coolant flows through one side next to each other when the radiators are connected in series, horizontally stacked radiators are traversed in parallel. In addition, the system can grow indefinitely in length. Optional modules connect the Delrin disc packs together.
The height of the radiators in standard configuration (ie without pump module) is 63.5 mm and the length is 44 mm longer than the respective fans (eg 3x 120 mm = 360 +44 = 404 mm).
The single circuit design allows the entire radiator to be used for one loop. Optional delrin end plates will be available optionally to split into a dual circuit allowing the same radiator to be used for multiple loops. This is an industry first!
Finally a mounted radiator with expansion tank and pump, ready for installation!
Note: Pump Included!
Total Reviews: 1 Average Rating:
Great Radiator, Cheap Plastic10-14-2013
Reviewer: Jason Van Patten (1)
This all-in-one unit is very handy because you don''t have to buy a separate radiator, reservoir, pump, and interconnects for them all. And with it being copper, it cools exceptionally well (I have it cooling my 2 GPUs). But... The plastic that the business end of the unit is made of is fairly cheap and soft. Specifically the threaded holes for the input, output, and reservoir. It is *exceptionally* easy to strip them out with any metal connectors, or even the plug that comes with the radiator. I''ve already destroyed one of the input holes because I accidentally over-tightened (with my fingers, no less) the quick-disconnect end. Don''t let some of the pictures fool you, such as the first one in this ad. That metal plate on the top of the reservoir does *not* continue down into the threaded area. The threads are tapped into the black plastic that you see on that end of the unit. I wouldn''t buy this again.