|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6||55805 fans like us!|
47 users browsing
My Wish List
Who We Recommend
The new aquastream XT pump is the completely redesigned successor to the well-proven aquastream Rev. 3.5. It presents the absolute peak of development of practically silent pumps for water cooling systems. But this pump is not only a pump, it is also a highly integrated microprocessor-controlled measuring- and control system for your cooling system. This truly unique system was even improved over the preceding system, greatly increasing the functionality of the unit. All version of the aquastream XT have an USB interface, allowing monitoring and control of the unit even without connection to an aquaero. The control functions are accessible via the popular and free Windows-software aquasuite. Depending on the unlocked software version of the pump additional features such as a fan output, temperature sensors as well as a connection possibility for a temperature sensor. In the maximum equipped version all important monitoring and control functionality for your water cooling system is already integrated in the pump.
The new features include turning detection as well as automatic maximum frequency measuring, ensuring reliable operation even at maximum power. In comparison the the previous versions of the aquastream XT the control unit was integrated into the pump's casing without having to enlarge the unit.
The pump in detail: Highest performance with smart electronics
The pump frequency is automatically set by the pump or can be set manually via the software. The pump finds the optimal operating point by itself.
Of course the aquastream XT is also equipped with the handy deaeration program which was introduced by Aqua computer years ago. This program can be started via a jumper or via the software. The program can even be configured to your own preferences.
The sensors of the aquastream XT: Water temperature included
Integrated fan controller. Intelligent controllers for super-quiet operation of your system
You wish to have more control? Take it! All controller settings can be influenced by you in detail or can be set comfortably with pre-sets. The speeds can be adjusted following the internally measured water temperature, the external temperature or following manual settings.
By the way: it is no problem to connect 3 airstream fans to the fan output. This means that even 360mm radiators can be controlled without problems.
Buy all features now - or when you really need it?
Please note: The pressure and inlet connections are identical with the Eheim 1046 pump. The adapter kit and suitable fittings have to be purchased separately and are available in the options below.
Total Reviews: 5 Average Rating:
Reliable-efficient in keeping temps down!01-28-2018
Reviewer: Darkmoon (1)
I''ve used this pump for years! Two different builds!X3930k for 4 years! and now for a year-i7-6900k temps-idle at 17c-to 18c ambient 75f 100% 45c-55c!
NOTHING BUT TROUBLE11-16-2013
Reviewer: Hyperlight Reseaarch (4)
The pump airlocks at the slightest provocation, and you need to have a substantial water reservoir above it to avoid frustration The installation instructions are vague and poorly translated from German, yet if you swap two tiny data cables it could destroy the pump''s mainboard. Although the pump may be "controlling" and "monitoring" dozens of pump parameters, the software is so buggy, only small number of them work. Aquacomputer another 5 or so years to practice building hardware.
Much better flow that older blue model!02-01-2013
Reviewer: 2dogs (9)
All other pumps a big step down from this in all ways. Get the basic cheaper model unless you are very very good with software. Discovered that hanging this down with direct coupling to reservoir is most efficient point in system to have a pump.
Pump with power08-16-2012
This is a great little pump. The first thing to note (as with all Eheim pumps) is that it runs cool. This means no radiant heat transmitted to the fluid for extra needed cooling. I have an HPPSi and this one is a souped up version of the HPPSi. Noise is slightly higher on this unit compared to the HPPSi. This one also draws more current. Lots of neat bells and whistles but to me whats most important is the flow rate and how cool the pump runs. This one does both well. No leaks, No problems as of yet. I would suggest to anyone to clean out your system at least once a year as gunk will build up over time slowing pump performance. Bottom line.. if you need plenty of power and flow rate for extra water cooling ie.. extra GPUs and such and dont mind a slight bit of noise then this is the pump for you. If your not cooling much more than the cpu,north bridge and perhaps one gpu then the HPPSi will be a good choice and run virtually silent. (Dont forget to purchase the adapter connections)
The Aqua Sploosher07-22-2012
Reviewer: Maine Waterboy (1)
Thi is the best pump I have ever used. The flow on it is incredible. I am almost ashamed of how many MC655s I bought, when this baby was around the whole time. The only con is the custom fittings for in/out take. Those darn things SHOULD BE INCLUDED! For the price we''re paying. Be careful folks, you''ll be like me, you''ll over lookk it, and then have to wait 7-10 days to put that new rig together b/c you''ll grab some of your many regular adapters and realize THEY don''t fit! But alas, once I got over that trauma, all was good. ;) As always, FCPU was THEE best at shipping, packing, and all aorund communication. Peace, MWB