A one time only LIMITED EDITION reservoir, the UV Warp Drive reservoir is the ultimate in show. With this reservoir, the coolant flows around the UV meteor light in the acrylic cylinder. Each reservoir is custom made to look like the warp drive we all recognize. Different settings are available for the meteor strip creating great lighting effects. As simple push button PCI slot switch is used to change lighting settings.

The Warp Drive reservoir has a single inlet and outlet located on the bottom of the reservoir. Two clear acrylic mounting clips with hardware are included for installation. The top has a fill-cap to make filling the system simple as possible.

Any type of coolant may be used in this reservoir, as clear, dyed, and UV reactive coolants all look absolutely stunning around the Warp Drive.

Reservoir comes with inverter cabling and PCI slot control switch and button.

Notes:
-Video is the Blue Warp Drive
-Pictures taken with reservoir filled with distilled H20 for effect!

Reservoir Material:	Polycarbonate, Cast Acrylic
Capacity:	Approximately 440mL
Length:	320mm (without fittings)
Tube Diameter:	50mm
Ring Diameter (top & bottom):	70mm
Ring Diameter (middle):	76mm
Ports:	3 Total 1 - Top 2 - Bottom along with meteor light power cable
Included in Box:	Warp Drive Reservoir Pair of Clear Mounting Rings w/ Hardware PCI Slot Control switch and button

12-30-2012
Reviewer: ZytheEKS (9)
It''s a pretty cool pump, especially if you get the UV one and have UV reactive fluid in it. Several complaints would be 1: It has VERY persnickety installation. Not just installing the brackets but more so that the little black sticks around it AREN''T fixed onto the it, and the black mid part AREN''T fixed to eachother and slide around about 4mm. This is JUST enough for them to fall out, so it''s a pain in the ass to install. 2: a LOT smaller than the pics and the vid lead you to believe. 3: It''s top isn''t water tight (at least not mine, maybe it was a defect.) If you intend to use this on a high pressure water loop UNLESS you buy a Y fitting and have it enter in the same direction the water is flowing. The ONLY reason I''m so happy with this is because it adds a one of a kind look. Meh