The RayStorm Copper Twin D5 AX360 kit is the most powerful 360 kit XSPC have ever made. It includes a special copper edition of our RayStorm block, our fantastic new AX360 radiator and two D5 Vario pumps in series.
The RayStorm Copper Block is our award winning design. The acetal top of the block has been replaced with a CNC machined copper top,. The mounting plate is machined from high quality aluminum and sand blasted before being anodised black. Finally we add a chromed inlay on the aluminum bracket to finish the look.
The AX360 is a new premium radiator from XSPC. The AX360 series combines a high performance copper/brass radiator core with a compact and beautifully finished aluminum enclosure. The screw holes are precision cut by CNC, which eliminates misaligned screw holes and gives 3mm of screw thread. The aluminum shell also provides a perfectly flat surface to mount the fans against, which eliminates air gaps and any need for a gasket.
Two D5 pumps not only provide extreme performance, but give you unrivaled reliability. You also get the safety of two pumps, so in the unlikely event of a pump failure your system will keep on running. Together the pumps are so powerful they can pump to a height of 7.7 meters (that's about the height of the average house), but if you're worried about noise the pumps have a variable speed dial on the back.
These top end components come together in a kit with high quality compression fittings, 7/16" tubing, fans, backplates, and a host of other accessories.
We're confident it's the best 360 watercooling kit on the market today.
Note: Kit does NOT come with fluid or additive.
Total Reviews: 3
Average Rating: 
Worthy Initial Investment
09-07-2014
Reviewer: Eggie (1)
Just dived into water cooling, the kit had everything I needed. Did some research on the internet to get past some questions, but all in all worth the investment if you plan on cooling more than your CPU. Great kit to build on.
Great Product
01-30-2014
Reviewer: Charles (15)
I used this kit with an additional AX240 Dual radiator to cool my motherboard, CPU, and GPU. It is easy to install, looks great, and is practically silent.
I overclocked my i7-4770K to 4.6 GHz, and pushed the base & memory clocks on my GTX 780 ti ~150MHz over factory settings. The hottest my components have gotten UNDER LOAD so far is 30°C!!
The only nitpick complaint I have is that the threads on XSPC''s components/fittings are not very forgiving. They are very tight and require a lot of torque, and would not be at all difficult to cross-thread. Just be mindful while installing and you will be fine.
Whether you are a total water cooling noob or a veteran, I highly recommend this kit.
Great kit
01-06-2013
Reviewer: Luke (5)
This was my first real liquid cooling installation, so I decided to just go with a kit. It was very easy to install after watching a few youtube videos for tips. I managed to get my 2600k overclocked to 4.8ghz without getting above 67c under full load! HUGE improvement over my old corsair h80!