|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6||55805 fans like us!|
35 users browsing
My Wish List
Who We Recommend
PrimoFlex™ ADVANCED LRT™ Tubing has been designed, formulated and manufactured for today’s evolving standards in the PC water cooling industry. Advanced LRT™ has been carefully formulated to enable it to perform in a wider range of closed loop cooling systems, making it the most compatible water cooling tubing ever created.
Low Radius Technology
PrimoChill’s proprietary blend of extremely low durometer PVC and a more rigid polymer resin gives PrimoFlex™ Advanced LRT™ its unbeatable bend ratio and durability. Even under exacting laboratory set-ups with abrupt small radius bends and multiple direction changes, Advanced LRT™ tubing resists twisting and collapse allowing for tighter bends without the kinking that can cause cooling failures or a reduction in system performance (A common problem when using other lesser brands).
Clarity in Sight and Mind
Smooth inner walls improve closed loop sanitation. Advanced LRT™ smooth surface inhibits particulate gathering or entrapment onto the tubing wall, thus reducing the potential of bacterial growth and contamination. With its new “resistant” inner walls, Advanced LRT™ will keep your system looking and feeling as clean as the day it was installed. The new technology used in PrimoFlex™ ADVANCED LRT™ has removed the need for the antimicrobial formerly impregnated in the Pro LRT tubing. The results are a noticeable improvement of clarity over PRO LRT™.
Outer Diameter (A): 3/4"
Wall Thickness (B): 1/8"
Inner Diameter (C): 1/2"
Note: Retail pack includes a 15mL bottle of Sys Prep Cooling Loop Pre-Treatment Concentrate!
Total Reviews: 3 Average Rating:
Reviewer: AWSOME! (41)
looked good, UV reactive, however its super stiff, puts a strain on tight bends. idk why its so stiff, my order last year of the same tuning wasn''t nearly as stiff.
Advanced LRT my butt..03-13-2013
Reviewer: Joe (37)
This stuff is as hard as a rock. Not best for bends of any angle. Even slight angles put more pressure on the waterblocks than I prefer. If you have straight connections its perfect, if not.. look elsewhere.
Very good MBR01-11-2013
Reviewer: FadedMaster (14)
This tubing has a very low maximum bend radius, especially for 1/2"x3/4" tubing. I was able to loop this tubing between two connections approximately 3" from one another without any kink (I also had PrimoChill''s anti-kink coils on there, but that wasn''t necessary). I would not call this bloodshed red though. It is more of a red-orange (closer to red than orange though). Granted this is without colored liquid running through it which might make it look darker.