The RP-1250 is a combined reservoir and pump unit which fits into a single 5.25" (CD) bay. Featuring the powerful Koolance PMP-400 pump, it also includes temperature monitoring, a front display, reservoir, pump & fan speed control, and rear G 1/4" threaded fitting sockets. This unit incorporates all-new Koolance electronics, with a 2-line OLED display for deeper user control and feedback.

IMPORTANT NOTE: The pump should never be run dry. Always test this product with coolant.

• Configure a dynamic fan ramp based on min/max temperature set points
• Show flow rate in LPM or GPM (optional Koolance flow meter required)
• Show pump and fan RPM
• Select only the values you want displayed
• Adjust alarm and shutdown points independently for all temperature sensors (3 included)
• Controls a 12VDC pump with 10 user levels up to 2A
• Fan output up to 2A on each connector
• Set the safety shutdown relay to normally-open or normally-closed

Maximum Flow Rate:	8.7 L/min (2.3 gal/min)
Maximum Head Pressure:	7m (23ft)
Motor:	Brushless DC, electronically commutated, spherical motor
Power Consumption (at max):	20W
Voltage Range:	8 to 13.2 VDC
Electrical Connector:	3-pin fan header with tachometer speed signal
Weight:	3.00 lb (1.36 kg)
Dimensions:	10.50 x 9.00 x 4.00 in (26.67 x 22.86 x 10.16 cm)
Capacity:	237mL (8 fl oz)
Display Type:	OLED
Pump:	PMP-400 @ 12V
Temperature Sensors:	10K Thermistors