|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6||55805 fans like us!|
18 users browsing
My Wish List
Who We Recommend
Deluxe External 120V to 12V Power Supply with Programmable Thermal Control & LED Display
This unit works with 100-240v AC power so it will work worldwide, you just have to adapt the plug to what your region uses.
Great for CabCool Cabinet Cooling Kits. Great adapter to power our 12V fans for cabinet cooling .
Temperature controlled thermal switch to monitor and control 12v devices installed inside your cabinet/media center.
This small sturdy enclosure houses a 120V to 12V adapter and our programmable thermal controller(s).
Includes (4) 3 pin molex style plugs on the rear of the box. You can double this to a total of (8) plugs with our dual controller model. Each controller can be programmed to turn the connected 12v devices on/off at the desired temperature. Each controller comes with a 24" thermal probe.
The front LED display is configured to show the real time temperature it's probe is detecting.
Includes a programmable thermal controller.
Set Start Temp: Press "start button" once to put unit in Start programming mode and the start up temperature will blink. Use the right Up/Down buttons to set the temperature (note: it must be at least 2F/1C higher than the turn off temperature) press "start button" again to return to the real time readout.
Set Stop Temp: Press "stop button" once to put unit in Stop programming mode and the turn off temperature will blink, use the right Up/Down buttons to set the temperature (note: it must be at least 2F/1C lower than the turn on temperature) press the "stop button" again to return to the real time readout.
C/F or Up: Will change display to and from Fahrenheit and Celsius or will increase the temperature when in the Start or Stop programming mode.
Down: Will decrease the temperature when in the Start or Stop programming mode.
Display On/Off Switch: To turn display light off (device will still function) simply press and hold the C/F Button for 5 seconds. Repeat the process to turn display back on.