|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6, Sat 11-4||45971 fans like us!|
100 users browsing
My Wish List
Who We Recommend
The Innovatek Protect is an electrically non-conductive, corrosion protection and heat distribution medium concentrate (the world-wide first water additive developed exclusively for this purpose) that protects water cooling reliably against corrosion and bio infestation. The additive is bio-degradable and is easy to use. This version is ready to use!
The Innovatek Protect line of products is the only corrosion protection agent officially certified by EHEIM and approved for use with EHEIM pumps in Personal Computers.
Innovatek Protect corrosion protection and heat distribution medium additive protects water cooling reliably against corrosion from use of different metals in the cooling system. Further it is electrically not conductive which makes application particularly safe.
Innovatek placed high importance on Enviromental Protection during development: Innovatek Protect is bio-degradable and can be disposed of in a normal manner without any danger to the environment or your health. Innovatek is not simply anti-freeze rebottled.
Note: Use of Innovatek Protect with Innovatek cooling systems is required to maintain the product's warranty.
What is Innovatek Protect?
The analytic investigation that Innovatek did during development found that copper oxihydrat itself does not obstruct the heat transfer. If the layer is however greenish or bluish, then it consists of (the best case scenario) copper carbonate (patina) or (the worse case scenario) a mixture of copper hydroxide and chloride, and/or sulfate. In the latter case the build-up doesn't stop and always keeps producing thicker and thicker layers which are highly obstructive to the thermal conduction. The cause: the water is not salt-free. The patina layers result from carbonic acid from air, thus the cooling circuit somewhere has contact to fresh, open air.
Total Reviews: 11 Average Rating:
Reviewer: JulioCesarSF (1)
Very good! I bought again.
So far excellent08-03-2012
Reviewer: Mike M (4)
I only just installed this coolant, but it seems to perform very well. With an XSPC dual-bay pump+res I had much fewer problems with frothing than Feser One or Feser Pure Water. This could just be the XSPC res vs a separate pump and res setup, though.
I love this stuff01-09-2012
Reviewer: Steve T (1)
I''ve never had any solids precipitate out of this fluid, unlike others I''ve tried. It''s been in my current system for over a year and it''s still clear as a bell.
Reviewer: 2dogs (9)
Left a drop on the bench overnight, next day it was still there, did not evaporate even here in Albuquerque. Get some on your mobo, it does not damage anything, but mobo will not operate till you blow every tiny bit off with a compressor. I got tiny drop on joints under southbridge heat sink, would not boot till I blew everything clear. Works extremely well otherwise!
Reviewer: DomPerignon (1)
You won''t find a better coolant.