This acrylic water cooling reservoir mount in any 5.25" drive bay. They are individually pressure tested and come with both colored black and silver face plates. Not installing a bay cover leaves the reservoir clear. Installation screws are included!

Note: Fittings are not included and available in the options below.

• G1/4" Thread
• High Quality Acrylic
• Brass screw threads
• Internal dividers to reduce bubbles and noise
• Removable Brushed Aluminium Faceplates
• Individually pressure tested

- Dimensions:	149 x 104 x 42.5mm
Thread:	G1/4

12-02-2011
Reviewer: Zatarra (4)
This unit has a nice finished look. The black/silver plates do let a tad bit of light out around the edges, but its made of acrylic so thats to be expected. I opted for no faceplace and added UV coolant and a CCFL and the thing looks amazing. I highly recommend adding a reservoir to increase the thermal mass of your system, especially if you are experiencing high temps even after water cooling- adding to the thermal mass of the system can really make a difference

11-11-2011
Reviewer: sabar (20)
Great value for the price. It is durable. Have 3 options with looks. You can have no face-plate, or use a supplied black or silver one. Looks great in all configurations. Comes with a single blue LED that fits into one of two ports in the back. Use some tape or zip ties to keep it in place. Make sure you don''t reverse the in-flow and out-flow or you will get air in the lines.

09-21-2011
Reviewer: LiNK (10)
Easy to install, looks pretty. and does what it is intended to do. Keep air bubbles out of the system. The LED is bright but if you use black electrical tape to mount it to the back of res, it won''t glare all over the place.. Would highly recommend.

05-03-2011
Reviewer: Mark G (1)
I''ve had this reservoir for about a year now paired with a swiftech mcp 350 and it works very well. It fits perfectly into a single 5.25 bay and is made of high quality thick plexiglass. It is ver easy to bleed simply tilting it forward. Cosmeticly it looks great and comes with 2 face plates, black & silver, if you like to do projects on a budget like me you can''t beat this res. It holds plenty of coolent and it is being used to cool a i7 1366.

12-28-2010
Reviewer: DHL (8)
Nice beefy thick acrylic. Like the metal inserts for the mounting screws which limits stripping the threads in just acrylic. To the guy who had the bubble problems, you are using the wrong port to feed your pump. The semicircular baffle is used to deflect high flow coming back into the reservior, and you feed the pump from the other side. If you do that, you will not have the pump cavitation problems. When you install, make sure you have enough tubing flexibility to allow pulling of the reservior out of you system bay by a few inches. Otherwise you cannot fill or top up your fluid levels. My LED worked fine, but XSPC does not provide a way to mount it. Just sticking the LED in the bore at the rear will not hold it in place. Its just bling, but not thought out too well.