Tygon E-3603 is now phthalate-free. Crystal clear and flexible, long lasintg and crack resistant, the new Tygon S E-3603 non-DEHP tubing delivers the same superior performance you come to expect, but now in a formulation that contains non-DEHP plasticizers.

Tygon brand tubing is the finest in quality for water cooling tubing available. This 3/8" ID, 1/2" OD model of tubing is specifically formulated to withstand aging, corrosion and kinking/bending. (wall thickness 1/16" / total wall thickness 1/8")

What makes Tygon brand tubing famous is it's extreme flexibility. Compared to regular PVC tubing, Tygon tubing will not bend at a much greater angle and still maintain 100% flow which makes this tubing simply ideal for the close quarters of a water cooled case.

Long-lasting and crack-resistant, Tygon Laboratory Tubing is less permeable than rubber tubing. The glassy-smooth inner bore helps prevent buildup so that cleaning is facilitated. Coils are marked at 1-foot intervals for easy measuring. Autoclavable. Remains flexible at -45°F (43°C). Durometer hardness: Shore A, 55.

Each quantity ordered equals 1 foot in length. For example, if a quantity of 3 is ordered, we will send you a 3 foot length.

Don't forget to pickup a Tube Cutter to make your job easier and cuts cleaner!

• Outstanding chemical resistance
• Lot-to-lot consistency for reproducible results
• Increases productivity in peristaltic pumps - outlasts other clear tubing 2 to 1
• Ideal for condensers, incubators, desiccators, gas lines and drain line

Part #:	ACF00027 3/8" ID, 1/2" OD
Wall Thickness:	1/16"
Minimum Bend Radius:	1 1/2"
Maximum Working Pressure at 73°F (psi):	20
Vacuum Rating, In. of Mercury at 73°F:	9

10-02-2011
Reviewer: Aethar (14)
First, yes this stuff is soft. If you require tight bends, get a corner form or anti-kink to keep it from kinking or get the thicker walled stuff. But for me, this stuff is amazing. Super easy to work with, crystal clear, and priced well enough.

12-14-2008
Reviewer: Ridl37 (3)
This tubing does kink easily when alone but that''s obvious when you look at its thin wall ultra flexible design. I planned ahead and bought the coil spring sleeves which allow much tighter bends. The ease of slipping this tubing on and off connectors has made reconfiguring my system with koolance compression fittings a snap. I suggest putting some clear lube on the tube where the compression collar turns to keep the tube from twisting with the collar.

04-01-2008
Reviewer: Anonymous
This Kink-proof tubing isn''t kink proof at all. I have to cut out two 2 foot sections and replace them with something better. Not highly recommended.

03-08-2008
Reviewer: Razorback (5)
I agree with the first poster. I''ve had this tubing for about 2 years -- over time it has collapsed in on itself and does feel very flimsy. The bright side is it is flexible, but if it fully kinks, it could destroy your pump and components if the system is running. I need to find something stronger. I''d gladly give up flexibility for more sturdiness.

03-07-2008
Reviewer: Drujon (33)
I have the experience of 3 different types of tubing and so far this is my favorite. I have used Koolance tubing, Thermaltake tubing (green *shiver*), and all three generally performed equally in kinking testing, but this was the best because it simply is easier to work with than stiffer tubing! No UV additives, no trouble. Kink sufferers: I recommend elbow connectors... will save you a few headaches ;)