|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6, Sat 11-4||55805 fans like us!|
22 users browsing
My Wish List
Who We Recommend
The XSPC Raystorm RX240 V3 Universal CPU Water Cooling Kit comes complete with everything you will need to cool your CPU. This kit is designed to handle your CPU and can be expanded to handle more blocks as well.
The kit uses the newest XSPC CPU block, the Raystorm as the core cooling component. This block has a pure copper base and is a top of the line in performance and looks. XSPC coupled this with the revision 3 RX series radiator for performance and looks.
The reservoir is a combination of the XSPC Bay reservoir along with a XSPC Variable Pump (D5 variant). This gives you the best power around along with the convenience of being combined into a single device saving more room.
This kit comes compete with all compression fittings through out for a perfect seal and a great look!
Total Reviews: 2 Average Rating:
Reviewer: Deedrix (4)
Very nice kit. Only problem I had was the stock tubing that came with it wasn''t to spec. The compression fittings wouldn''t slide onto the hose. Luckily I ordered the XSPC red tubing that worked perfectly.
Raystorm RX240 kit05-07-2014
Nice kit. Everything you need to get up and running with water cooling is all in the box. I purchased this to replace a preassembled Corsair H80 which cooled an Intel i7 3770k. Never really had any complaints about the Corsair but always questioned a factory sealed water cooler. Thereís really no way of knowing if the system is running low on fluid or how efficient itís working except by the core temperature readings. During heaving gaming or video rendering the Corsair fans would literally scream just trying to keep the temps down. SoÖit was time to upgrade and the RAYSTORM RX240 kit was my choice. Installation was pretty much straight forward and simple. The hardest part, or most time consuming, was cleaning the thermal paste off the processor for the new install. After that it was just measure, cut and assemble hose and fittings and install pump, fans and radiator. The fitting for the LED on the pump is not machined properly (it will fall out). Easy remedy = wrap a thin strip of clear tape at the base of LED to fill the void. Insert with tape and problem will be solved. Filling and bleeding the system can take a while so be patient. Fittings seemed to go together best if a small amount of soapy water is applied to compression sleeve and outside of hose. This helps prevent binding or twisting of PVC hose. No leaks, no conflicts and Iím totally loving how quiet my rig has become because of this upgrade. Core temps are very low even during maxed out gaming. Next upgrade will be swapping out my GTX680ís for newer faster GPUís where Iíll be able to really put the RAYSTORM RX240 to use.