These acrylic case feet each have a built in blue LED for a stunning lighting effect. The kit comes complete with four feet, four blue leds, a switch, a four pin pass-thru adapter, double side tape for the feet and instructions.

06-23-2008
Reviewer: Toriless (2)
These feet are not as wide as pictured in the other two pictures and are not recommended for heavy cases. They''re fairly tall and look like in the FrozenCPU picture but NOT the other two. Notice that the one real picture shows ribbing, and the star-like pattern on the ground: while that''s what they are really like. The other two pictures are fake ones with NO texturing in the side and glowing solid bottom and no star like pattern on the ground around the feet since they lack the ribbing of the real feet. They are also solid in the fake pictures. The real feet are hollow like in the one accurate picture by FrozenCPU. They have some real neat LIGHTING SEQUENCES, like fancy Christmas lights, that go through a number of visual effects. They need to redesign them so the pole that sticks through the case as wide as standard feet and has threads on top and a matching SECURING RING to screw on the other side to hold them in place, not some damned TAPE. The problem is that they attach you your case via a small double sided ring of tape. It''s very insecure and the feet will fall off the case the first time you slide it anywhere without doing so by grabbing the case by its feet, including pushing it back after installing them, or the spongy tape will shear off. Am I supposed to support my entire computer on feet secured by a flimsy piece of double-sided TAPE? It may be OK for securing a UV light inside the case but not the whole damned computer. The increased height also makes the light real easy to see but it further makes the case less stable since the entire weight is secures by these very small rings of double sided TAPE. These feet are about an inch wide and probably an inch and a quarter tall. The blue LED’s are inserted into a divot in the top of UNSECURED pole that sticks through the case.

08-04-2007
Reviewer: Adam (3)
The style of the feet are different from what is in the picture, but that really doesn''t matter to me. I am pleased with the amount of light that the 4 LED''s put out. Once the feet are on, the case sits about 1 inch up. This might not be the best product if your case isn''t very stable. I only had one problem with this product, this is when it came to installing the last foot. My mobo came all the down to the bottom of the case and I almost broke both the LED and the foot trying to jam the light into the foot below the case. Over all I am very pleased with these feet.

09-06-2006
Reviewer: Chris (3)
I bought these a while ago and they were a lot brighter than they look in the picture. The only thing that I didn''t like about them is that one of the LEDs broke off when I was re-wiring my case so I had to replace it. I love how it rises the entire case about an inch off of the table and emits a noticeable glow from under the case.