The Kingwin Mach 1 uses both a 120mm fan and an 80mm fan to cool itself and your PC - and they light up with a cool blue! It has screw-on modular connectors to make sure the cables stay in place no-matter what it must endure. Attractive blue rings light up around the plugged in cables. At 600 Watts, this power supply can handle most modern systems and of course the modular cables make sure you don't have extra cables cluttering up your case.

• Special cable management system.
• Comply with Intel ATX/BTX standard.
• Dual PCI express connectors.
• Dual SATA connectors.
• One rear blue led fan (80 x 80 mm).
• One bottom blue led fan (120 x 120 mm).
• Support EPS & Intel 945/955 chipset.
• ATX 12V 2.0V.
• AC Input 115 & 230V.
• Output gold-coated connector
• Output over / under voltage protection.
• Output shot protection.
• Over load protection.
• Nickel-Plated.
• Dual Windows Design

Maximum power:	600 Watts
Frequency range:	47 ~ 63Hz
Input waveform:	Sine wave, modified sine wave or square wave
Input maximum current:	10.7A@115V/6.2A@230V
Withstand voltage:	Input to output 1800Vac 3 sec/Input to ground 1800Vac 3 sec
Efficiency:	70% minimum at full-load
Overpower protection:	105%~150%
Over voltage protection:	+5V output is between 5.7V to 6.5V/+12V output is between 13.2V to 14.4V/+3.3V output is between 3.7V to 4.1V
Under voltage protection:	+5V output is between 3.3V to 3.7V/+12V output is between 8.5V to 9.5V/+3.3V output is between 2.0V to 2.4V
Unit dimension:	6 3/8"(161 mm) L x 5 7/8"(150 mm) W x 3 3/8"(85 mm) H
Unit weight:	6 lbs
MTBF:	100,000 hours under the following conditions full-rated load, 120Vac input, and 25C ambient
Switches:	ATX Logic power rocker switch
Fan size:	120 mm x 120 mm x 25 mm bottom/80 x 80 x 25 mm rear

Virtual-Hideout.net